From: Konrad Dybcio <konrad.dybcio@linaro.org>
To: linux-arm-msm@vger.kernel.org, andersson@kernel.org,
agross@kernel.org, krzysztof.kozlowski@linaro.org
Cc: patches@linaro.org, Konrad Dybcio <konrad.dybcio@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 1/3] arm64: dts: qcom: sm8150-kumano: Add GPIO keys
Date: Sat, 10 Dec 2022 15:25:23 +0100 [thread overview]
Message-ID: <20221210142525.16974-1-konrad.dybcio@linaro.org> (raw)
Configure hardware buttons (V-, Camera Shutter/Focus) on Kumano
devices.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
.../dts/qcom/sm8150-sony-xperia-kumano.dtsi | 62 +++++++++++++++++++
1 file changed, 62 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi
index c958a8b16730..2352dff213fc 100644
--- a/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi
@@ -46,6 +46,40 @@ framebuffer: framebuffer@9c000000 {
};
};
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&focus_n &snapshot_n &vol_down_n>;
+
+ key-camera-focus {
+ label = "Camera Focus";
+ linux,code = <KEY_CAMERA_FOCUS>;
+ gpios = <&pm8150b_gpios 2 GPIO_ACTIVE_LOW>;
+ debounce-interval = <15>;
+ linux,can-disable;
+ gpio-key,wakeup;
+ };
+
+ key-camera-snapshot {
+ label = "Camera Snapshot";
+ linux,code = <KEY_CAMERA>;
+ gpios = <&pm8150b_gpios 1 GPIO_ACTIVE_LOW>;
+ debounce-interval = <15>;
+ linux,can-disable;
+ gpio-key,wakeup;
+ };
+
+ key-vol-down {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ gpios = <&pm8150_gpios 1 GPIO_ACTIVE_LOW>;
+ debounce-interval = <15>;
+ linux,can-disable;
+ gpio-key,wakeup;
+ };
+ };
+
vph_pwr: vph-pwr-regulator {
compatible = "regulator-fixed";
regulator-name = "vph_pwr";
@@ -410,6 +444,34 @@ &i2c10 {
/* Samsung touchscreen @ 48 */
};
+&pm8150_gpios {
+ vol_down_n: vol-down-n-state {
+ pins = "gpio1";
+ function = "normal";
+ power-source = <0>;
+ bias-pull-up;
+ input-enable;
+ };
+};
+
+&pm8150b_gpios {
+ snapshot_n: snapshot-n-state {
+ pins = "gpio1";
+ function = "normal";
+ power-source = <0>;
+ bias-pull-up;
+ input-enable;
+ };
+
+ focus_n: focus-n-state {
+ pins = "gpio2";
+ function = "normal";
+ power-source = <0>;
+ bias-pull-up;
+ input-enable;
+ };
+};
+
&pon_pwrkey {
status = "okay";
};
--
2.38.1
next reply other threads:[~2022-12-10 15:35 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-10 14:25 Konrad Dybcio [this message]
2022-12-10 14:25 ` [PATCH 2/3] arm64: dts: qcom: sm8150-kumano: Add NXP PN553 NFC Konrad Dybcio
2022-12-13 11:43 ` Marijn Suijten
2022-12-10 14:25 ` [PATCH 3/3] arm64: dts: qcom: sm8150-kumano: Configure resin as volume up key Konrad Dybcio
2022-12-13 11:19 ` [PATCH 1/3] arm64: dts: qcom: sm8150-kumano: Add GPIO keys Marijn Suijten
2022-12-28 4:36 ` (subset) " Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221210142525.16974-1-konrad.dybcio@linaro.org \
--to=konrad.dybcio@linaro.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=patches@linaro.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).