devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bhupesh Sharma <bhupesh.sharma@linaro.org>
To: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org
Cc: agross@kernel.org, bhupesh.sharma@linaro.org,
	bhupesh.linux@gmail.com, linux-kernel@vger.kernel.org,
	robh+dt@kernel.org, krzysztof.kozlowski@linaro.org,
	konrad.dybcio@linaro.org, andersson@kernel.org
Subject: [PATCH 3/3] arm64: dts: qcom: sm6115: Add USB SS qmp phy node
Date: Tue, 13 Dec 2022 18:08:23 +0530	[thread overview]
Message-ID: <20221213123823.455731-4-bhupesh.sharma@linaro.org> (raw)
In-Reply-To: <20221213123823.455731-1-bhupesh.sharma@linaro.org>

Add USB superspeed qmp phy node to dtsi.

Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm6115.dtsi | 38 ++++++++++++++++++++++++++--
 1 file changed, 36 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
index e4ce135264f3d..9c5c024919f92 100644
--- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -579,6 +579,40 @@ usb_hsphy: phy@1613000 {
 			status = "disabled";
 		};
 
+		usb_qmpphy: phy@1615000 {
+			compatible = "qcom,sm6115-qmp-usb3-phy";
+			reg = <0x01615000 0x200>;
+			#clock-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
+				 <&gcc GCC_AHB2PHY_USB_CLK>;
+			clock-names = "com_aux",
+				      "ref",
+				      "cfg_ahb";
+			resets = <&gcc GCC_USB3_PHY_PRIM_SP0_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_PRIM_SP0_BCR>;
+			reset-names = "phy", "phy_phy";
+			status = "disabled";
+
+			usb_ssphy: phy@1615200 {
+				reg = <0x01615200 0x200>,
+				      <0x01615400 0x200>,
+				      <0x01615c00 0x400>,
+				      <0x01615600 0x200>,
+				      <0x01615800 0x200>,
+				      <0x01615a00 0x100>;
+				#phy-cells = <0>;
+				#clock-cells = <1>;
+				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "usb3_phy_pipe_clk_src";
+			};
+		};
+
+
 		qfprom@1b40000 {
 			compatible = "qcom,sm6115-qfprom", "qcom,qfprom";
 			reg = <0x01b40000 0x7000>;
@@ -1023,8 +1057,8 @@ usb_dwc3: usb@4e00000 {
 				compatible = "snps,dwc3";
 				reg = <0x04e00000 0xcd00>;
 				interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&usb_hsphy>;
-				phy-names = "usb2-phy";
+				phys = <&usb_hsphy>, <&usb_ssphy>;
+				phy-names = "usb2-phy", "usb3-phy";
 				iommus = <&apps_smmu 0x120 0x0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-- 
2.38.1


  parent reply	other threads:[~2022-12-13 12:41 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-12-13 12:38 [PATCH 0/3] arm64: dts: sm6115: Add USB SS qmp phy node and perform some cleanups Bhupesh Sharma
2022-12-13 12:38 ` [PATCH 1/3] arm64: dts: qcom: sm6115: Cleanup USB node names Bhupesh Sharma
2022-12-13 12:39   ` Konrad Dybcio
2022-12-13 12:51   ` Krzysztof Kozlowski
2022-12-13 18:49     ` Bhupesh Sharma
2022-12-13 12:38 ` [PATCH 2/3] arm64: dts: qcom: sm6115: Move USB node's 'maximum-speed' and 'dr_mode' properties to dts Bhupesh Sharma
2022-12-13 12:39   ` Konrad Dybcio
2022-12-13 12:38 ` Bhupesh Sharma [this message]
2022-12-13 12:49   ` [PATCH 3/3] arm64: dts: qcom: sm6115: Add USB SS qmp phy node Konrad Dybcio
2022-12-13 22:18     ` Dmitry Baryshkov
2022-12-14  4:43       ` Bhupesh Sharma
2022-12-13 12:56   ` Krzysztof Kozlowski
2022-12-13 18:52     ` Bhupesh Sharma
2022-12-13 18:54       ` Konrad Dybcio
2022-12-13 18:59       ` Krzysztof Kozlowski
2022-12-14  5:20         ` Bhupesh Sharma
2022-12-14  9:56           ` Konrad Dybcio

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221213123823.455731-4-bhupesh.sharma@linaro.org \
    --to=bhupesh.sharma@linaro.org \
    --cc=agross@kernel.org \
    --cc=andersson@kernel.org \
    --cc=bhupesh.linux@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=konrad.dybcio@linaro.org \
    --cc=krzysztof.kozlowski@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).