[PATCH 1/7] arm64: dts: tqma8mpql: Fix temperature sensor compatible

devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed

* [PATCH 1/7] arm64: dts: tqma8mpql: Fix temperature sensor compatible
@ 2022-12-14  9:59 Alexander Stein
  2022-12-14  9:59 ` [PATCH 2/7] arm64: dts: mba8mx: " Alexander Stein
                   ` (6 more replies)
  0 siblings, 7 replies; 9+ messages in thread
From: Alexander Stein @ 2022-12-14  9:59 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Shawn Guo, Sascha Hauer,
	Pengutronix Kernel Team, Fabio Estevam
  Cc: Alexander Stein, linux, devicetree, linux-arm-kernel

Use the correct compatible 'nxp,se97b' as it is an SE97BTP chip.
While at it, fix the node name according to device tree spec
recommendations. The EEPROM is a separate node anyway.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
 arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts | 5 ++---
 arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi         | 5 ++---
 2 files changed, 4 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
index a3340814099aa..f7f657b007a18 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
@@ -516,9 +516,8 @@ tlv320aic3x04: audio-codec@18 {
 		ldoin-supply = <&reg_vcc_3v3>;
 	};
 
-	/* NXP SE97BTP with temperature sensor + eeprom */
-	se97_1c: temperature-sensor-eeprom@1c {
-		compatible = "nxp,se97", "jedec,jc-42.4-temp";
+	se97_1c: temperature-sensor@1c {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
 		reg = <0x1c>;
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi
index 7bd680a926ce7..ebc29a950ba9a 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi
@@ -63,9 +63,8 @@ &i2c1 {
 	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
-	/* NXP SE97BTP with temperature sensor + eeprom */
-	se97: temperature-sensor-eeprom@1b {
-		compatible = "nxp,se97", "jedec,jc-42.4-temp";
+	se97: temperature-sensor@1b {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
 		reg = <0x1b>;
 	};
 
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 9+ messages in thread

* [PATCH 2/7] arm64: dts: mba8mx: Fix temperature sensor compatible
  2022-12-14  9:59 [PATCH 1/7] arm64: dts: tqma8mpql: Fix temperature sensor compatible Alexander Stein
@ 2022-12-14  9:59 ` Alexander Stein
  2022-12-14  9:59 ` [PATCH 3/7] arm64: dts: imx8mq-tqma8mq: " Alexander Stein
                   ` (5 subsequent siblings)
  6 siblings, 0 replies; 9+ messages in thread
From: Alexander Stein @ 2022-12-14  9:59 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Shawn Guo, Sascha Hauer,
	Pengutronix Kernel Team, Fabio Estevam
  Cc: Alexander Stein, linux, devicetree, linux-arm-kernel

Use the correct compatible 'nxp,se97b' as it is an SE97BTP chip.
While at it, fix the node name according to device tree spec
recommendations.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
 arch/arm64/boot/dts/freescale/mba8mx.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/mba8mx.dtsi b/arch/arm64/boot/dts/freescale/mba8mx.dtsi
index 446a8ec3eb6fc..94d83f20233b7 100644
--- a/arch/arm64/boot/dts/freescale/mba8mx.dtsi
+++ b/arch/arm64/boot/dts/freescale/mba8mx.dtsi
@@ -260,8 +260,8 @@ tlv320aic3x04: audio-codec@18 {
 		ldoin-supply = <&reg_vcc_3v3>;
 	};
 
-	sensor1: sensor@1f {
-		compatible = "nxp,se97", "jedec,jc-42.4-temp";
+	sensor1: temperator-sensor@1f {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
 		reg = <0x1f>;
 	};
 
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 9+ messages in thread

* [PATCH 3/7] arm64: dts: imx8mq-tqma8mq: Fix temperature sensor compatible
  2022-12-14  9:59 [PATCH 1/7] arm64: dts: tqma8mpql: Fix temperature sensor compatible Alexander Stein
  2022-12-14  9:59 ` [PATCH 2/7] arm64: dts: mba8mx: " Alexander Stein
@ 2022-12-14  9:59 ` Alexander Stein
  2022-12-14  9:59 ` [PATCH 4/7] arm64: dts: imx8mn-tqma8mqnl: " Alexander Stein
                   ` (4 subsequent siblings)
  6 siblings, 0 replies; 9+ messages in thread
From: Alexander Stein @ 2022-12-14  9:59 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Shawn Guo, Sascha Hauer,
	Pengutronix Kernel Team, Fabio Estevam
  Cc: Alexander Stein, linux, devicetree, linux-arm-kernel

Use the correct compatible 'nxp,se97b' as it is an SE97BTP chip.
While at it, fix the node name according to device tree spec
recommendations. The EEPROM is a separate node anyway.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
 arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi
index 9a95e30fb42d9..5ca6b22525469 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi
@@ -194,8 +194,8 @@ vgen6_reg: vgen6 {
 		};
 	};
 
-	sensor0: temperature-sensor-eeprom@1b {
-		compatible = "nxp,se97", "jedec,jc-42.4-temp";
+	sensor0: temperature-sensor@1b {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
 		reg = <0x1b>;
 	};
 
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 9+ messages in thread

* [PATCH 4/7] arm64: dts: imx8mn-tqma8mqnl: Fix temperature sensor compatible
  2022-12-14  9:59 [PATCH 1/7] arm64: dts: tqma8mpql: Fix temperature sensor compatible Alexander Stein
  2022-12-14  9:59 ` [PATCH 2/7] arm64: dts: mba8mx: " Alexander Stein
  2022-12-14  9:59 ` [PATCH 3/7] arm64: dts: imx8mq-tqma8mq: " Alexander Stein
@ 2022-12-14  9:59 ` Alexander Stein
  2022-12-14  9:59 ` [PATCH 5/7] arm64: dts: imx8mm-tqma8mqml: " Alexander Stein
                   ` (3 subsequent siblings)
  6 siblings, 0 replies; 9+ messages in thread
From: Alexander Stein @ 2022-12-14  9:59 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Shawn Guo, Sascha Hauer,
	Pengutronix Kernel Team, Fabio Estevam
  Cc: Alexander Stein, linux, devicetree, linux-arm-kernel

Use the correct compatible 'nxp,se97b' as it is an SE97BTP chip.
While at it, fix the node name according to device tree spec
recommendations. The EEPROM is a separate node anyway.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
 arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi
index 48b965386e879..391ca5516e4c5 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi
@@ -77,8 +77,8 @@ &i2c1 {
 	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
-	sensor0: temperature-sensor-eeprom@1b {
-		compatible = "nxp,se97", "jedec,jc-42.4-temp";
+	sensor0: temperature-sensor@1b {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
 		reg = <0x1b>;
 	};
 
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 9+ messages in thread

* [PATCH 5/7] arm64: dts: imx8mm-tqma8mqml: Fix temperature sensor compatible
  2022-12-14  9:59 [PATCH 1/7] arm64: dts: tqma8mpql: Fix temperature sensor compatible Alexander Stein
                   ` (2 preceding siblings ...)
  2022-12-14  9:59 ` [PATCH 4/7] arm64: dts: imx8mn-tqma8mqnl: " Alexander Stein
@ 2022-12-14  9:59 ` Alexander Stein
  2022-12-14  9:59 ` [PATCH 6/7] ARM: dts: mba6ulx: " Alexander Stein
                   ` (2 subsequent siblings)
  6 siblings, 0 replies; 9+ messages in thread
From: Alexander Stein @ 2022-12-14  9:59 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Shawn Guo, Sascha Hauer,
	Pengutronix Kernel Team, Fabio Estevam
  Cc: Alexander Stein, linux, devicetree, linux-arm-kernel

Use the correct compatible 'nxp,se97b' as it is an SE97BTP chip.
While at it, fix the node name according to device tree spec
recommendations. The EEPROM is a separate node anyway.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
 arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi
index 88d89cd46c74a..b4466a26d838a 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi
@@ -87,8 +87,8 @@ &i2c1 {
 	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
-	sensor0: temperature-sensor-eeprom@1b {
-		compatible = "nxp,se97", "jedec,jc-42.4-temp";
+	sensor0: temperature-sensor@1b {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
 		reg = <0x1b>;
 	};
 
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 9+ messages in thread

* [PATCH 6/7] ARM: dts: mba6ulx: Fix temperature sensor compatible
  2022-12-14  9:59 [PATCH 1/7] arm64: dts: tqma8mpql: Fix temperature sensor compatible Alexander Stein
                   ` (3 preceding siblings ...)
  2022-12-14  9:59 ` [PATCH 5/7] arm64: dts: imx8mm-tqma8mqml: " Alexander Stein
@ 2022-12-14  9:59 ` Alexander Stein
  2022-12-14  9:59 ` [PATCH 7/7] ARM: dts: imx6ul-tqma6ul: " Alexander Stein
  2022-12-15  9:27 ` [PATCH 1/7] arm64: dts: tqma8mpql: " Marco Felsch
  6 siblings, 0 replies; 9+ messages in thread
From: Alexander Stein @ 2022-12-14  9:59 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Shawn Guo, Sascha Hauer,
	Pengutronix Kernel Team, Fabio Estevam
  Cc: Alexander Stein, linux, devicetree, linux-arm-kernel

Use the correct compatible 'nxp,se97b' as it is an SE97BTP chip.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
 arch/arm/boot/dts/mba6ulx.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/mba6ulx.dtsi b/arch/arm/boot/dts/mba6ulx.dtsi
index b8e576ab8860d..d08f525acfe56 100644
--- a/arch/arm/boot/dts/mba6ulx.dtsi
+++ b/arch/arm/boot/dts/mba6ulx.dtsi
@@ -229,7 +229,7 @@ tlv320aic32x4: audio-codec@18 {
 	};
 
 	jc42: temperature-sensor@19 {
-		compatible = "nxp,se97", "jedec,jc-42.4-temp";
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
 		reg = <0x19>;
 	};
 
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 9+ messages in thread

* [PATCH 7/7] ARM: dts: imx6ul-tqma6ul: Fix temperature sensor compatible
  2022-12-14  9:59 [PATCH 1/7] arm64: dts: tqma8mpql: Fix temperature sensor compatible Alexander Stein
                   ` (4 preceding siblings ...)
  2022-12-14  9:59 ` [PATCH 6/7] ARM: dts: mba6ulx: " Alexander Stein
@ 2022-12-14  9:59 ` Alexander Stein
  2022-12-15  9:27 ` [PATCH 1/7] arm64: dts: tqma8mpql: " Marco Felsch
  6 siblings, 0 replies; 9+ messages in thread
From: Alexander Stein @ 2022-12-14  9:59 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Shawn Guo, Sascha Hauer,
	Pengutronix Kernel Team, Fabio Estevam
  Cc: Alexander Stein, linux, devicetree, linux-arm-kernel

Use the correct compatible 'nxp,se97b' as it is an SE97BTP chip.
While at it, fix the node name according to device tree spec
recommendations. The EEPROM is a separate node anyway.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
 arch/arm/boot/dts/imx6ul-tqma6ul-common.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx6ul-tqma6ul-common.dtsi b/arch/arm/boot/dts/imx6ul-tqma6ul-common.dtsi
index eca94ed6451b0..57e647fc32374 100644
--- a/arch/arm/boot/dts/imx6ul-tqma6ul-common.dtsi
+++ b/arch/arm/boot/dts/imx6ul-tqma6ul-common.dtsi
@@ -116,8 +116,8 @@ reg_vldo4: vldo4 {
 		};
 	};
 
-	jc42_1a: eeprom-temperature-sensor@1a {
-		compatible = "nxp,se97", "jedec,jc-42.4-temp";
+	jc42_1a: eeprom-temperature@1a {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
 		reg = <0x1a>;
 	};
 
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 9+ messages in thread

* Re: [PATCH 1/7] arm64: dts: tqma8mpql: Fix temperature sensor compatible
  2022-12-14  9:59 [PATCH 1/7] arm64: dts: tqma8mpql: Fix temperature sensor compatible Alexander Stein
                   ` (5 preceding siblings ...)
  2022-12-14  9:59 ` [PATCH 7/7] ARM: dts: imx6ul-tqma6ul: " Alexander Stein
@ 2022-12-15  9:27 ` Marco Felsch
  6 siblings, 0 replies; 9+ messages in thread
From: Marco Felsch @ 2022-12-15  9:27 UTC (permalink / raw)
  To: Alexander Stein
  Cc: Rob Herring, Krzysztof Kozlowski, Shawn Guo, Sascha Hauer,
	Pengutronix Kernel Team, Fabio Estevam, devicetree,
	linux-arm-kernel, linux

Hi Alexander,

On 22-12-14, Alexander Stein wrote:
> Use the correct compatible 'nxp,se97b' as it is an SE97BTP chip.
> While at it, fix the node name according to device tree spec
> recommendations. The EEPROM is a separate node anyway.

Just FTR: sometimes other components like bootloaders use the node names
as well, therefore changing node names should be done with caution. For
this series it is okay I think.

> 
> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>

The whole series lgtm, feel free to add my.

Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>

> ---
>  arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts | 5 ++---
>  arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi         | 5 ++---
>  2 files changed, 4 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
> index a3340814099aa..f7f657b007a18 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
> @@ -516,9 +516,8 @@ tlv320aic3x04: audio-codec@18 {
>  		ldoin-supply = <&reg_vcc_3v3>;
>  	};
>  
> -	/* NXP SE97BTP with temperature sensor + eeprom */
> -	se97_1c: temperature-sensor-eeprom@1c {
> -		compatible = "nxp,se97", "jedec,jc-42.4-temp";
> +	se97_1c: temperature-sensor@1c {
> +		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
>  		reg = <0x1c>;
>  	};
>  
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi
> index 7bd680a926ce7..ebc29a950ba9a 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi
> @@ -63,9 +63,8 @@ &i2c1 {
>  	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
>  	status = "okay";
>  
> -	/* NXP SE97BTP with temperature sensor + eeprom */
> -	se97: temperature-sensor-eeprom@1b {
> -		compatible = "nxp,se97", "jedec,jc-42.4-temp";
> +	se97: temperature-sensor@1b {
> +		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
>  		reg = <0x1b>;
>  	};
>  
> -- 
> 2.34.1
> 
> 
> 

^ permalink raw reply	[flat|nested] 9+ messages in thread

* [PATCH 1/7] arm64: dts: tqma8mpql: Fix temperature sensor compatible
@ 2022-12-07 12:41 Alexander Stein
  2022-12-07 12:42 ` [PATCH 2/7] arm64: dts: mba8mx: " Alexander Stein
  0 siblings, 1 reply; 9+ messages in thread
From: Alexander Stein @ 2022-12-07 12:41 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Shawn Guo, Sascha Hauer,
	Pengutronix Kernel Team, Fabio Estevam
  Cc: Alexander Stein, linux, devicetree, linux-arm-kernel

Use the correct compatible 'nxp,se97b' as it is an SE97BTP chip.
While at it, fix the node name according to device tree spec
recommendations. The EEPROM is a separate node anyway.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
 arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts | 5 ++---
 arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi         | 5 ++---
 2 files changed, 4 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
index a3340814099aa..f7f657b007a18 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
@@ -516,9 +516,8 @@ tlv320aic3x04: audio-codec@18 {
 		ldoin-supply = <&reg_vcc_3v3>;
 	};
 
-	/* NXP SE97BTP with temperature sensor + eeprom */
-	se97_1c: temperature-sensor-eeprom@1c {
-		compatible = "nxp,se97", "jedec,jc-42.4-temp";
+	se97_1c: temperature-sensor@1c {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
 		reg = <0x1c>;
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi
index 7bd680a926ce7..ebc29a950ba9a 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi
@@ -63,9 +63,8 @@ &i2c1 {
 	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
-	/* NXP SE97BTP with temperature sensor + eeprom */
-	se97: temperature-sensor-eeprom@1b {
-		compatible = "nxp,se97", "jedec,jc-42.4-temp";
+	se97: temperature-sensor@1b {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
 		reg = <0x1b>;
 	};
 
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 9+ messages in thread

* [PATCH 2/7] arm64: dts: mba8mx: Fix temperature sensor compatible
  2022-12-07 12:41 Alexander Stein
@ 2022-12-07 12:42 ` Alexander Stein
  0 siblings, 0 replies; 9+ messages in thread
From: Alexander Stein @ 2022-12-07 12:42 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Shawn Guo, Sascha Hauer,
	Pengutronix Kernel Team, Fabio Estevam
  Cc: Alexander Stein, linux, devicetree, linux-arm-kernel

Use the correct compatible 'nxp,se97b' as it is an SE97BTP chip.
While at it, fix the node name according to device tree spec
recommendations.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
 arch/arm64/boot/dts/freescale/mba8mx.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/mba8mx.dtsi b/arch/arm64/boot/dts/freescale/mba8mx.dtsi
index 446a8ec3eb6fc..94d83f20233b7 100644
--- a/arch/arm64/boot/dts/freescale/mba8mx.dtsi
+++ b/arch/arm64/boot/dts/freescale/mba8mx.dtsi
@@ -260,8 +260,8 @@ tlv320aic3x04: audio-codec@18 {
 		ldoin-supply = <&reg_vcc_3v3>;
 	};
 
-	sensor1: sensor@1f {
-		compatible = "nxp,se97", "jedec,jc-42.4-temp";
+	sensor1: temperator-sensor@1f {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
 		reg = <0x1f>;
 	};
 
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 9+ messages in thread

end of thread, other threads:[~2022-12-15  9:28 UTC | newest]

Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2022-12-14  9:59 [PATCH 1/7] arm64: dts: tqma8mpql: Fix temperature sensor compatible Alexander Stein
2022-12-14  9:59 ` [PATCH 2/7] arm64: dts: mba8mx: " Alexander Stein
2022-12-14  9:59 ` [PATCH 3/7] arm64: dts: imx8mq-tqma8mq: " Alexander Stein
2022-12-14  9:59 ` [PATCH 4/7] arm64: dts: imx8mn-tqma8mqnl: " Alexander Stein
2022-12-14  9:59 ` [PATCH 5/7] arm64: dts: imx8mm-tqma8mqml: " Alexander Stein
2022-12-14  9:59 ` [PATCH 6/7] ARM: dts: mba6ulx: " Alexander Stein
2022-12-14  9:59 ` [PATCH 7/7] ARM: dts: imx6ul-tqma6ul: " Alexander Stein
2022-12-15  9:27 ` [PATCH 1/7] arm64: dts: tqma8mpql: " Marco Felsch
  -- strict thread matches above, loose matches on Subject: below --
2022-12-07 12:41 Alexander Stein
2022-12-07 12:42 ` [PATCH 2/7] arm64: dts: mba8mx: " Alexander Stein

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).