From: Chris Morgan <macroalpha82@gmail.com>
To: dri-devel@lists.freedesktop.org
Cc: devicetree@vger.kernel.org, maccraft123mc@gmail.com,
tzimmermann@suse.de, mripard@kernel.org,
maarten.lankhorst@linux.intel.com, heiko@sntech.de,
linux-rockchip@lists.infradead.org,
krzysztof.kozlowski+dt@linaro.org, robh+dt@kernel.org,
daniel@ffwll.ch, airlied@gmail.com, sam@ravnborg.org,
thierry.reding@gmail.com, linus.walleij@linaro.org,
Chris Morgan <macromorgan@hotmail.com>
Subject: [PATCH V6 0/4] drm/panel: Add Magnachip D53E6EA8966 Panel Controller
Date: Thu, 15 Dec 2022 12:52:07 -0600 [thread overview]
Message-ID: <20221215185211.1560736-1-macroalpha82@gmail.com> (raw)
From: Chris Morgan <macromorgan@hotmail.com>
Add the Magnachip D53E6EA8966 panel IC controller for display panels
such as the Samsung AMS495QA01 panel as found on the Anbernic RG503.
This panel uses DSI to receive video signals, but 3-wire SPI to receive
command signals using DBI.
Changes since V5:
- Reverted dt binding documentation name back to
samsung,ams495qa01.yaml.
- Removed no longer needed of_graph.h header file.
- Added backlight as a dependency.
Changes since V4:
- Renamed driver from the panel model to the panel IC controller per
DRM team.
- Added a drm_of helper function of drm_of_get_dsi_bus() to handle
finding and populating the DSI node when the DSI node is not the
parent of the DSI controlled display.
- Converted the documented commands to constants to make it more
readable.
- Reset GPIO is now required and documented as GPIO_ACTIVE_LOW.
- Removed "prepared" logic from panel.
Changes since V3:
- Updated documentation to add spi-peripheral-props.yaml per updates
made for similar devices. Note that I removed a "Reviewed-by" tag
from Rob Herring since this change probably needs to be confirmed.
- Added binding for RG503, since this device is now accepted with this
request: https://lore.kernel.org/linux-rockchip/166274831283.21181.6861718157177507544.b4-ty@sntech.de/
Changes since V2:
- Added 50hz mode at request of userspace devs.
- Renamed "dupa" to panel name. Good catch Maya.
- Added Maya's Signed-off-by.
- Removed check for max backlight, since it is already done by
backlight_device_set_brightness.
- Fixed minor formatting issues on devicetree binding documentation
and added port to provided example.
Changes since V1:
- Removed errant reference to backlight in documentation. This is an
OLED panel.
- Made elvss regulator optional. In my case its hard wired and not
controllable.
- Added "prepared" enum to track panel status to prevent unbalanced
regulator enable/disable.
Chris Morgan (4):
drm: of: Add drm_of_get_dsi_bus helper function
dt-bindings: display: panel: Add Samsung AMS495QA01
drm/panel: Add Magnachip D53E6EA8966 Panel Driver
arm64: dts: rockchip: add display to RG503
.../display/panel/samsung,ams495qa01.yaml | 57 ++
.../dts/rockchip/rk3566-anbernic-rg503.dts | 55 ++
drivers/gpu/drm/drm_of.c | 62 +++
drivers/gpu/drm/panel/Kconfig | 11 +
drivers/gpu/drm/panel/Makefile | 1 +
.../drm/panel/panel-magnachip-d53e6ea8966.c | 514 ++++++++++++++++++
include/drm/drm_of.h | 11 +
7 files changed, 711 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/samsung,ams495qa01.yaml
create mode 100644 drivers/gpu/drm/panel/panel-magnachip-d53e6ea8966.c
--
2.34.1
next reply other threads:[~2022-12-15 18:52 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-15 18:52 Chris Morgan [this message]
2022-12-15 18:52 ` [PATCH V6 1/4] drm: of: Add drm_of_get_dsi_bus helper function Chris Morgan
2022-12-15 22:11 ` kernel test robot
2022-12-15 22:11 ` kernel test robot
2022-12-29 21:12 ` Linus Walleij
2022-12-15 18:52 ` [PATCH V6 2/4] dt-bindings: display: panel: Add Samsung AMS495QA01 Chris Morgan
2022-12-16 16:05 ` Rob Herring
2022-12-15 18:52 ` [PATCH V6 3/4] drm/panel: Add Magnachip D53E6EA8966 Panel Driver Chris Morgan
2022-12-15 18:52 ` [PATCH V6 4/4] arm64: dts: rockchip: add display to RG503 Chris Morgan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221215185211.1560736-1-macroalpha82@gmail.com \
--to=macroalpha82@gmail.com \
--cc=airlied@gmail.com \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=heiko@sntech.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=maccraft123mc@gmail.com \
--cc=macromorgan@hotmail.com \
--cc=mripard@kernel.org \
--cc=robh+dt@kernel.org \
--cc=sam@ravnborg.org \
--cc=thierry.reding@gmail.com \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).