devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lucas Stach <l.stach@pengutronix.de>
To: Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>,
	NXP Linux Team <linux-imx@nxp.com>, Liu Ying <victor.liu@nxp.com>,
	Andrzej Hajda <andrzej.hajda@intel.com>,
	Neil Armstrong <neil.armstrong@linaro.org>,
	Robert Foss <robert.foss@linaro.org>,
	Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
	dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
	Marek Vasut <marex@denx.de>,
	patchwork-lst@pengutronix.de,
	Philipp Zabel <p.zabel@pengutronix.de>
Subject: [PATCH v2 2/4] drm/bridge: imx: add bridge wrapper driver for i.MX8MP DWC HDMI
Date: Fri, 16 Dec 2022 22:07:40 +0100	[thread overview]
Message-ID: <20221216210742.3233382-2-l.stach@pengutronix.de> (raw)
In-Reply-To: <20221216210742.3233382-1-l.stach@pengutronix.de>

Add a simple wrapper driver for the DWC HDMI bridge driver that
implements the few bits that are necessary to abstract the i.MX8MP
SoC integration.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Marek Vasut <marex@denx.de>
---
 drivers/gpu/drm/bridge/imx/Kconfig       |   9 ++
 drivers/gpu/drm/bridge/imx/Makefile      |   2 +
 drivers/gpu/drm/bridge/imx/imx8mp-hdmi.c | 140 +++++++++++++++++++++++
 3 files changed, 151 insertions(+)
 create mode 100644 drivers/gpu/drm/bridge/imx/imx8mp-hdmi.c

diff --git a/drivers/gpu/drm/bridge/imx/Kconfig b/drivers/gpu/drm/bridge/imx/Kconfig
index 608f47f41bcd..d828d8bfd893 100644
--- a/drivers/gpu/drm/bridge/imx/Kconfig
+++ b/drivers/gpu/drm/bridge/imx/Kconfig
@@ -44,4 +44,13 @@ config DRM_IMX8QXP_PIXEL_LINK_TO_DPI
 	  Choose this to enable pixel link to display pixel interface(PXL2DPI)
 	  found in Freescale i.MX8qxp processor.
 
+config DRM_IMX8MP_DW_HDMI_BRIDGE
+	tristate "i.MX8MP HDMI bridge support"
+	depends on OF
+	depends on COMMON_CLK
+	select DRM_DW_HDMI
+	help
+	  Choose this to enable support for the internal HDMI encoder found
+	  on the i.MX8MP SoC.
+
 endif # ARCH_MXC || COMPILE_TEST
diff --git a/drivers/gpu/drm/bridge/imx/Makefile b/drivers/gpu/drm/bridge/imx/Makefile
index aa90ec8d5433..03b0074ae538 100644
--- a/drivers/gpu/drm/bridge/imx/Makefile
+++ b/drivers/gpu/drm/bridge/imx/Makefile
@@ -7,3 +7,5 @@ obj-$(CONFIG_DRM_IMX8QXP_LDB) += imx8qxp-ldb.o
 obj-$(CONFIG_DRM_IMX8QXP_PIXEL_COMBINER) += imx8qxp-pixel-combiner.o
 obj-$(CONFIG_DRM_IMX8QXP_PIXEL_LINK) += imx8qxp-pixel-link.o
 obj-$(CONFIG_DRM_IMX8QXP_PIXEL_LINK_TO_DPI) += imx8qxp-pxl2dpi.o
+
+obj-$(CONFIG_DRM_IMX8MP_DW_HDMI_BRIDGE) += imx8mp-hdmi.o
diff --git a/drivers/gpu/drm/bridge/imx/imx8mp-hdmi.c b/drivers/gpu/drm/bridge/imx/imx8mp-hdmi.c
new file mode 100644
index 000000000000..06849b817aed
--- /dev/null
+++ b/drivers/gpu/drm/bridge/imx/imx8mp-hdmi.c
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+/*
+ * Copyright (C) 2022 Pengutronix, Lucas Stach <kernel@pengutronix.de>
+ */
+
+#include <drm/bridge/dw_hdmi.h>
+#include <drm/drm_modes.h>
+#include <linux/clk.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+struct imx8mp_hdmi {
+	struct dw_hdmi_plat_data plat_data;
+	struct dw_hdmi *dw_hdmi;
+	struct clk *pixclk;
+	struct clk *fdcc;
+};
+
+static enum drm_mode_status
+imx8mp_hdmi_mode_valid(struct dw_hdmi *dw_hdmi, void *data,
+		       const struct drm_display_info *info,
+		       const struct drm_display_mode *mode)
+{
+	struct imx8mp_hdmi *hdmi = (struct imx8mp_hdmi *)data;
+
+	if (mode->clock < 13500)
+		return MODE_CLOCK_LOW;
+
+	if (mode->clock > 297000)
+		return MODE_CLOCK_HIGH;
+
+	if (clk_round_rate(hdmi->pixclk, mode->clock * 1000) !=
+	    mode->clock * 1000)
+		return MODE_CLOCK_RANGE;
+
+	/* We don't support double-clocked and Interlaced modes */
+	if ((mode->flags & DRM_MODE_FLAG_DBLCLK) ||
+	    (mode->flags & DRM_MODE_FLAG_INTERLACE))
+		return MODE_BAD;
+
+	return MODE_OK;
+}
+
+static int imx8mp_hdmi_phy_init(struct dw_hdmi *dw_hdmi, void *data,
+				const struct drm_display_info *display,
+				const struct drm_display_mode *mode)
+{
+	return 0;
+}
+
+static void imx8mp_hdmi_phy_disable(struct dw_hdmi *dw_hdmi, void *data)
+{
+}
+
+static void im8mp_hdmi_phy_setup_hpd(struct dw_hdmi *hdmi, void *data)
+{
+	/*
+	 * Just release PHY core from reset, all other power management is done
+	 * by the PHY driver.
+	 */
+	dw_hdmi_phy_gen1_reset(hdmi);
+
+	dw_hdmi_phy_setup_hpd(hdmi, data);
+}
+
+static const struct dw_hdmi_phy_ops imx8mp_hdmi_phy_ops = {
+	.init		= imx8mp_hdmi_phy_init,
+	.disable	= imx8mp_hdmi_phy_disable,
+	.setup_hpd	= im8mp_hdmi_phy_setup_hpd,
+	.read_hpd	= dw_hdmi_phy_read_hpd,
+	.update_hpd	= dw_hdmi_phy_update_hpd,
+};
+
+static int imx8mp_dw_hdmi_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct dw_hdmi_plat_data *plat_data;
+	struct imx8mp_hdmi *hdmi;
+	int ret;
+
+	hdmi = devm_kzalloc(dev, sizeof(*hdmi), GFP_KERNEL);
+	if (!hdmi)
+		return -ENOMEM;
+
+	plat_data = &hdmi->plat_data;
+
+	hdmi->pixclk = devm_clk_get(dev, "pix");
+	if (IS_ERR(hdmi->pixclk))
+		return dev_err_probe(dev, PTR_ERR(hdmi->pixclk),
+				     "Unable to get pixel clock\n");
+
+	hdmi->fdcc = devm_clk_get_enabled(dev, "fdcc");
+	if (IS_ERR(hdmi->fdcc))
+		return dev_err_probe(dev, PTR_ERR(hdmi->fdcc),
+				     "Unable to get FDCC clock\n");
+
+	plat_data->mode_valid = imx8mp_hdmi_mode_valid;
+	plat_data->phy_ops = &imx8mp_hdmi_phy_ops;
+	plat_data->phy_name = "SAMSUNG HDMI TX PHY";
+	plat_data->priv_data = hdmi;
+
+	hdmi->dw_hdmi = dw_hdmi_probe(pdev, plat_data);
+	if (IS_ERR(hdmi->dw_hdmi))
+		return PTR_ERR(hdmi->dw_hdmi);
+
+	platform_set_drvdata(pdev, hdmi);
+
+	return 0;
+}
+
+static int imx8mp_dw_hdmi_remove(struct platform_device *pdev)
+{
+	struct imx8mp_hdmi *hdmi = platform_get_drvdata(pdev);
+
+	dw_hdmi_remove(hdmi->dw_hdmi);
+
+	return 0;
+}
+
+static const struct of_device_id imx8mp_dw_hdmi_of_table[] = {
+	{ .compatible = "fsl,imx8mp-hdmi" },
+	{ /* Sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, imx8mp_dw_hdmi_of_table);
+
+static struct platform_driver imx8mp_dw_hdmi_platform_driver = {
+	.probe		= imx8mp_dw_hdmi_probe,
+	.remove		= imx8mp_dw_hdmi_remove,
+	.driver		= {
+		.name	= "imx8mp-dw-hdmi",
+		.of_match_table = imx8mp_dw_hdmi_of_table,
+	},
+};
+
+module_platform_driver(imx8mp_dw_hdmi_platform_driver);
+
+MODULE_DESCRIPTION("i.MX8MP HDMI encoder driver");
+MODULE_LICENSE("GPL");
-- 
2.30.2


  reply	other threads:[~2022-12-16 21:07 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-12-16 21:07 [PATCH v2 1/4] dt-bindings: display: imx: add binding for i.MX8MP HDMI TX Lucas Stach
2022-12-16 21:07 ` Lucas Stach [this message]
2022-12-17  8:29   ` [PATCH v2 2/4] drm/bridge: imx: add bridge wrapper driver for i.MX8MP DWC HDMI Liu Ying
2023-03-07 12:59   ` Richard Leitner
2023-07-25  7:23   ` Frieder Schrempf
2023-08-18 13:07   ` Luca Ceresoli
2022-12-16 21:07 ` [PATCH v2 3/4] dt-bindings: display: imx: add binding for i.MX8MP HDMI PVI Lucas Stach
2022-12-17  8:57   ` Liu Ying
2022-12-16 21:07 ` [PATCH v2 4/4] drm/bridge: imx: add driver for HDMI TX Parallel Video Interface Lucas Stach
2022-12-17  8:22   ` kernel test robot
2022-12-17  9:27   ` Liu Ying
2023-03-07 12:58   ` Richard Leitner
2023-05-04 19:16     ` Adam Ford
2023-07-25  7:23   ` Frieder Schrempf
2023-08-18 13:07   ` Luca Ceresoli
2022-12-17  7:40 ` [PATCH v2 1/4] dt-bindings: display: imx: add binding for i.MX8MP HDMI TX Liu Ying
2022-12-20 18:37   ` Rob Herring
2022-12-20 18:28 ` Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221216210742.3233382-2-l.stach@pengutronix.de \
    --to=l.stach@pengutronix.de \
    --cc=Laurent.pinchart@ideasonboard.com \
    --cc=andrzej.hajda@intel.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=kernel@pengutronix.de \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-imx@nxp.com \
    --cc=marex@denx.de \
    --cc=neil.armstrong@linaro.org \
    --cc=p.zabel@pengutronix.de \
    --cc=patchwork-lst@pengutronix.de \
    --cc=robert.foss@linaro.org \
    --cc=robh+dt@kernel.org \
    --cc=victor.liu@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).