From: Eric Chanudet <echanude@redhat.com>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Andrew Halaney <ahalaney@redhat.com>,
Brian Masney <bmasney@redhat.com>,
Eric Chanudet <echanude@redhat.com>
Subject: [PATCH v4 4/4] arm64: dts: qcom: pm8941-rtc add alarm register
Date: Mon, 19 Dec 2022 14:10:01 -0500 [thread overview]
Message-ID: <20221219191000.2570545-5-echanude@redhat.com> (raw)
In-Reply-To: <20221219191000.2570545-1-echanude@redhat.com>
A few descriptions including a qcom,pm8941-rtc describe two reg-names
for the "rtc" and "alarm" register banks, but only one offset.
For consistency with reg-names, add the "alarm" register offset.
No functional change is expected from this.
Signed-off-by: Eric Chanudet <echanude@redhat.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
arch/arm64/boot/dts/qcom/pm8150.dtsi | 2 +-
arch/arm64/boot/dts/qcom/pm8916.dtsi | 3 ++-
arch/arm64/boot/dts/qcom/pm8950.dtsi | 2 +-
arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi | 2 +-
arch/arm64/boot/dts/qcom/pmp8074.dtsi | 2 +-
arch/arm64/boot/dts/qcom/pms405.dtsi | 2 +-
6 files changed, 7 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi b/arch/arm64/boot/dts/qcom/pm8150.dtsi
index 574fa95a2871..db90c55fa2cf 100644
--- a/arch/arm64/boot/dts/qcom/pm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi
@@ -121,7 +121,7 @@ pm8150_adc_tm: adc-tm@3500 {
rtc@6000 {
compatible = "qcom,pm8941-rtc";
- reg = <0x6000>;
+ reg = <0x6000>, <0x6100>;
reg-names = "rtc", "alarm";
interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
};
diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi
index 08f9ca006e72..e2a6b66d8847 100644
--- a/arch/arm64/boot/dts/qcom/pm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi
@@ -93,7 +93,8 @@ adc-chan@f {
rtc@6000 {
compatible = "qcom,pm8941-rtc";
- reg = <0x6000>;
+ reg = <0x6000>, <0x6100>;
+ reg-names = "rtc", "alarm";
interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
};
diff --git a/arch/arm64/boot/dts/qcom/pm8950.dtsi b/arch/arm64/boot/dts/qcom/pm8950.dtsi
index 07c3896bd36f..d7df4ad60509 100644
--- a/arch/arm64/boot/dts/qcom/pm8950.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8950.dtsi
@@ -126,7 +126,7 @@ xo-therm-buf@3c {
rtc@6000 {
compatible = "qcom,pm8941-rtc";
- reg = <0x6000>;
+ reg = <0x6000>, <0x6100>;
reg-names = "rtc", "alarm";
interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
};
diff --git a/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi b/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi
index 20c5d60c8c2c..ee1e428d3a6e 100644
--- a/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmm8155au_1.dtsi
@@ -108,7 +108,7 @@ pmm8155au_1_adc_tm: adc-tm@3500 {
pmm8155au_1_rtc: rtc@6000 {
compatible = "qcom,pm8941-rtc";
- reg = <0x6000>;
+ reg = <0x6000>, <0x6100>;
reg-names = "rtc", "alarm";
interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
diff --git a/arch/arm64/boot/dts/qcom/pmp8074.dtsi b/arch/arm64/boot/dts/qcom/pmp8074.dtsi
index ceb2e6358b3d..580684411d74 100644
--- a/arch/arm64/boot/dts/qcom/pmp8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmp8074.dtsi
@@ -74,7 +74,7 @@ vph-pwr@131 {
pmp8074_rtc: rtc@6000 {
compatible = "qcom,pm8941-rtc";
- reg = <0x6000>;
+ reg = <0x6000>, <0x6100>;
reg-names = "rtc", "alarm";
interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
allow-set-time;
diff --git a/arch/arm64/boot/dts/qcom/pms405.dtsi b/arch/arm64/boot/dts/qcom/pms405.dtsi
index ffe9e33808d0..22edb47c6a84 100644
--- a/arch/arm64/boot/dts/qcom/pms405.dtsi
+++ b/arch/arm64/boot/dts/qcom/pms405.dtsi
@@ -125,7 +125,7 @@ xo_therm: xo_temp@76 {
rtc@6000 {
compatible = "qcom,pm8941-rtc";
- reg = <0x6000>;
+ reg = <0x6000>, <0x6100>;
reg-names = "rtc", "alarm";
interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
};
--
2.38.1
next prev parent reply other threads:[~2022-12-19 19:13 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-19 19:09 [PATCH v4 0/4] arm64: dts: qcom: enable sa8540p-ride rtc Eric Chanudet
2022-12-19 19:09 ` [PATCH v4 1/4] arm64: dts: qcom: rename pm8450a dtsi to sa8540p-pmics Eric Chanudet
2022-12-19 19:09 ` [PATCH v4 2/4] arm64: dts: qcom: sa8450p-pmics: add rtc node Eric Chanudet
2022-12-19 19:10 ` [PATCH v4 3/4] arm64: dts: qcom: sa8295p-adp: use sa8540p-pmics Eric Chanudet
2022-12-19 19:10 ` Eric Chanudet [this message]
2022-12-20 19:51 ` [PATCH v4 0/4] arm64: dts: qcom: enable sa8540p-ride rtc Andrew Halaney
2023-01-11 5:09 ` Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221219191000.2570545-5-echanude@redhat.com \
--to=echanude@redhat.com \
--cc=agross@kernel.org \
--cc=ahalaney@redhat.com \
--cc=andersson@kernel.org \
--cc=bmasney@redhat.com \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).