From: Hal Feng <hal.feng@starfivetech.com>
To: <linux-riscv@lists.infradead.org>, <devicetree@vger.kernel.org>,
<linux-clk@vger.kernel.org>
Cc: Conor Dooley <conor@kernel.org>,
Palmer Dabbelt <palmer@dabbelt.com>,
"Rob Herring" <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Stephen Boyd <sboyd@kernel.org>,
"Michael Turquette" <mturquette@baylibre.com>,
Philipp Zabel <p.zabel@pengutronix.de>,
Emil Renner Berthing <emil.renner.berthing@canonical.com>,
Hal Feng <hal.feng@starfivetech.com>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH v3 11/11] reset: starfive: Add StarFive JH7110 reset driver
Date: Tue, 20 Dec 2022 08:50:54 +0800 [thread overview]
Message-ID: <20221220005054.34518-12-hal.feng@starfivetech.com> (raw)
In-Reply-To: <20221220005054.34518-1-hal.feng@starfivetech.com>
Add auxiliary driver to support StarFive JH7110 system
and always-on resets.
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
---
drivers/reset/starfive/Kconfig | 8 +++
drivers/reset/starfive/Makefile | 1 +
.../reset/starfive/reset-starfive-jh7110.c | 64 +++++++++++++++++++
.../reset/starfive/reset-starfive-jh71x0.h | 6 ++
4 files changed, 79 insertions(+)
create mode 100644 drivers/reset/starfive/reset-starfive-jh7110.c
diff --git a/drivers/reset/starfive/Kconfig b/drivers/reset/starfive/Kconfig
index 9d15c4110e40..fab1a081af17 100644
--- a/drivers/reset/starfive/Kconfig
+++ b/drivers/reset/starfive/Kconfig
@@ -10,3 +10,11 @@ config RESET_STARFIVE_JH7100
default SOC_STARFIVE
help
This enables the reset controller driver for the StarFive JH7100 SoC.
+
+config RESET_STARFIVE_JH7110
+ bool "StarFive JH7110 Reset Driver"
+ depends on AUXILIARY_BUS && CLK_STARFIVE_JH7110_SYS
+ select RESET_STARFIVE_JH71X0
+ default CLK_STARFIVE_JH7110_SYS
+ help
+ This enables the reset controller driver for the StarFive JH7110 SoC.
diff --git a/drivers/reset/starfive/Makefile b/drivers/reset/starfive/Makefile
index f6aa12466fad..7a44b66fb9d5 100644
--- a/drivers/reset/starfive/Makefile
+++ b/drivers/reset/starfive/Makefile
@@ -2,3 +2,4 @@
obj-$(CONFIG_RESET_STARFIVE_JH71X0) += reset-starfive-jh71x0.o
obj-$(CONFIG_RESET_STARFIVE_JH7100) += reset-starfive-jh7100.o
+obj-$(CONFIG_RESET_STARFIVE_JH7110) += reset-starfive-jh7110.o
diff --git a/drivers/reset/starfive/reset-starfive-jh7110.c b/drivers/reset/starfive/reset-starfive-jh7110.c
new file mode 100644
index 000000000000..74bbc79f86af
--- /dev/null
+++ b/drivers/reset/starfive/reset-starfive-jh7110.c
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Reset driver for the StarFive JH7110 SoC
+ *
+ * Copyright (C) 2022 StarFive Technology Co., Ltd.
+ */
+
+#include <linux/auxiliary_bus.h>
+
+#include "reset-starfive-jh71x0.h"
+
+#include <dt-bindings/reset/starfive,jh7110-crg.h>
+
+static int jh7110_reset_probe(struct auxiliary_device *adev,
+ const struct auxiliary_device_id *id)
+{
+ struct reset_info *info = (struct reset_info *)(id->driver_data);
+ void __iomem *base = dev_get_drvdata(adev->dev.parent);
+
+ if (!info || !base)
+ return -ENODEV;
+
+ return reset_starfive_jh71x0_register(&adev->dev, adev->dev.parent->of_node,
+ base + info->assert_offset,
+ base + info->status_offset,
+ NULL,
+ info->nr_resets,
+ NULL);
+}
+
+static const struct reset_info jh7110_sys_info = {
+ .nr_resets = JH7110_SYSRST_END,
+ .assert_offset = 0x2F8,
+ .status_offset = 0x308,
+};
+
+static const struct reset_info jh7110_aon_info = {
+ .nr_resets = JH7110_AONRST_END,
+ .assert_offset = 0x38,
+ .status_offset = 0x3C,
+};
+
+static const struct auxiliary_device_id jh7110_reset_ids[] = {
+ {
+ .name = "clk_starfive_jh71x0.reset-sys",
+ .driver_data = (kernel_ulong_t)&jh7110_sys_info,
+ },
+ {
+ .name = "clk_starfive_jh71x0.reset-aon",
+ .driver_data = (kernel_ulong_t)&jh7110_aon_info,
+ },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(auxiliary, jh7110_reset_ids);
+
+static struct auxiliary_driver jh7110_reset_driver = {
+ .probe = jh7110_reset_probe,
+ .id_table = jh7110_reset_ids,
+};
+module_auxiliary_driver(jh7110_reset_driver);
+
+MODULE_AUTHOR("Hal Feng <hal.feng@starfivetech.com>");
+MODULE_DESCRIPTION("StarFive JH7110 reset driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/reset/starfive/reset-starfive-jh71x0.h b/drivers/reset/starfive/reset-starfive-jh71x0.h
index db7d39a87f87..e485472e1adc 100644
--- a/drivers/reset/starfive/reset-starfive-jh71x0.h
+++ b/drivers/reset/starfive/reset-starfive-jh71x0.h
@@ -6,6 +6,12 @@
#ifndef __RESET_STARFIVE_JH71X0_H
#define __RESET_STARFIVE_JH71X0_H
+struct reset_info {
+ unsigned int nr_resets;
+ unsigned int assert_offset;
+ unsigned int status_offset;
+};
+
int reset_starfive_jh71x0_register(struct device *dev, struct device_node *of_node,
void __iomem *assert, void __iomem *status,
const u32 *asserted, unsigned int nr_resets,
--
2.38.1
next prev parent reply other threads:[~2022-12-20 0:51 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-20 0:50 [PATCH v3 00/11] Basic clock and reset support for StarFive JH7110 RISC-V SoC Hal Feng
2022-12-20 0:50 ` [PATCH v3 01/11] clk: starfive: Factor out common JH7100 and JH7110 code Hal Feng
2022-12-20 21:54 ` Conor Dooley
2022-12-20 0:50 ` [PATCH v3 02/11] clk: starfive: Rename "jh7100" to "jh71x0" for the common code Hal Feng
2022-12-20 22:08 ` Conor Dooley
2022-12-23 6:23 ` Hal Feng
2022-12-20 0:50 ` [PATCH v3 03/11] reset: Create subdirectory for StarFive drivers Hal Feng
2022-12-20 22:15 ` Conor Dooley
2022-12-23 7:02 ` Hal Feng
2022-12-20 0:50 ` [PATCH v3 04/11] reset: starfive: Factor out common JH71X0 reset code Hal Feng
2022-12-20 22:28 ` Conor Dooley
2022-12-23 7:49 ` Hal Feng
2022-12-20 0:50 ` [PATCH v3 05/11] reset: starfive: Rename "jh7100" to "jh71x0" for the common code Hal Feng
2022-12-20 2:40 ` kernel test robot
2022-12-20 22:31 ` Conor Dooley
2022-12-24 3:48 ` kernel test robot
2022-12-20 0:50 ` [PATCH v3 06/11] reset: starfive: jh71x0: Use 32bit I/O on 32bit registers Hal Feng
2022-12-20 22:49 ` Conor Dooley
2022-12-20 0:50 ` [PATCH v3 07/11] dt-bindings: clock: Add StarFive JH7110 system clock and reset generator Hal Feng
2022-12-20 20:12 ` Rob Herring
2022-12-20 23:14 ` Conor Dooley
2022-12-20 23:16 ` Conor Dooley
2022-12-25 16:26 ` Hal Feng
2022-12-27 20:15 ` Conor Dooley
2023-02-16 14:42 ` Hal Feng
2023-02-16 18:20 ` Conor Dooley
2023-02-17 2:27 ` Hal Feng
2023-02-17 7:51 ` Conor Dooley
2023-02-17 12:20 ` Hal Feng
2023-02-17 13:32 ` Conor Dooley
2023-02-17 15:47 ` Krzysztof Kozlowski
2023-02-17 16:27 ` Conor Dooley
2023-02-18 10:20 ` Krzysztof Kozlowski
2023-02-18 11:17 ` Conor Dooley
2023-02-18 14:55 ` Krzysztof Kozlowski
2023-02-18 15:08 ` Conor Dooley
2023-02-21 22:17 ` Stephen Boyd
2023-02-21 23:39 ` Conor Dooley
2023-02-22 13:27 ` Hal Feng
2023-02-22 16:26 ` Conor Dooley
2023-02-23 3:03 ` Hal Feng
2023-02-23 6:18 ` Conor Dooley
2023-02-23 9:52 ` Hal Feng
2022-12-20 0:50 ` [PATCH v3 08/11] dt-bindings: clock: Add StarFive JH7110 always-on " Hal Feng
2022-12-20 20:14 ` Rob Herring
2022-12-20 23:19 ` Conor Dooley
2023-02-16 17:19 ` Hal Feng
2022-12-20 0:50 ` [PATCH v3 09/11] clk: starfive: Add StarFive JH7110 system clock driver Hal Feng
2022-12-23 9:57 ` kernel test robot
2023-01-05 11:32 ` kernel test robot
2023-02-19 21:23 ` Emil Renner Berthing
2023-02-21 6:44 ` Hal Feng
2022-12-20 0:50 ` [PATCH v3 10/11] clk: starfive: Add StarFive JH7110 always-on " Hal Feng
2022-12-23 11:28 ` kernel test robot
2023-01-05 13:44 ` kernel test robot
2022-12-20 0:50 ` Hal Feng [this message]
2022-12-20 7:14 ` [PATCH v3 11/11] reset: starfive: Add StarFive JH7110 reset driver kernel test robot
2022-12-23 12:39 ` kernel test robot
2022-12-27 19:20 ` kernel test robot
2023-01-05 15:35 ` kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221220005054.34518-12-hal.feng@starfivetech.com \
--to=hal.feng@starfivetech.com \
--cc=conor@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=emil.renner.berthing@canonical.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=mturquette@baylibre.com \
--cc=p.zabel@pengutronix.de \
--cc=palmer@dabbelt.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).