From: Hal Feng <hal.feng@starfivetech.com>
To: <linux-riscv@lists.infradead.org>, <devicetree@vger.kernel.org>,
<linux-clk@vger.kernel.org>
Cc: Conor Dooley <conor@kernel.org>,
Palmer Dabbelt <palmer@dabbelt.com>,
"Rob Herring" <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Stephen Boyd <sboyd@kernel.org>,
"Michael Turquette" <mturquette@baylibre.com>,
Philipp Zabel <p.zabel@pengutronix.de>,
Emil Renner Berthing <emil.renner.berthing@canonical.com>,
Hal Feng <hal.feng@starfivetech.com>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH v3 04/11] reset: starfive: Factor out common JH71X0 reset code
Date: Tue, 20 Dec 2022 08:50:47 +0800 [thread overview]
Message-ID: <20221220005054.34518-5-hal.feng@starfivetech.com> (raw)
In-Reply-To: <20221220005054.34518-1-hal.feng@starfivetech.com>
From: Emil Renner Berthing <kernel@esmil.dk>
The StarFive JH7100 SoC has additional reset controllers for audio and
video, but the registers follow the same structure. On the JH7110 the
reset registers don't get their own memory range, but instead follow the
clock control registers. The registers still follow the same structure
though, so let's factor out the common code to handle all these cases.
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
---
MAINTAINERS | 4 +-
drivers/reset/starfive/Kconfig | 4 +
drivers/reset/starfive/Makefile | 2 +
.../reset/starfive/reset-starfive-jh7100.c | 121 ++----------------
...rfive-jh7100.c => reset-starfive-jh71x0.c} | 91 ++++---------
.../reset/starfive/reset-starfive-jh71x0.h | 14 ++
6 files changed, 57 insertions(+), 179 deletions(-)
copy drivers/reset/starfive/{reset-starfive-jh7100.c => reset-starfive-jh71x0.c} (50%)
create mode 100644 drivers/reset/starfive/reset-starfive-jh71x0.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 117024b52d06..a2ce424b6986 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -19647,11 +19647,11 @@ F: Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml
F: drivers/pinctrl/starfive/
F: include/dt-bindings/pinctrl/pinctrl-starfive-jh7100.h
-STARFIVE JH7100 RESET CONTROLLER DRIVER
+STARFIVE JH71X0 RESET CONTROLLER DRIVERS
M: Emil Renner Berthing <kernel@esmil.dk>
S: Maintained
F: Documentation/devicetree/bindings/reset/starfive,jh7100-reset.yaml
-F: drivers/reset/starfive/reset-starfive-jh7100.c
+F: drivers/reset/starfive/reset-starfive-jh71*
F: include/dt-bindings/reset/starfive-jh7100.h
STATIC BRANCH/CALL
diff --git a/drivers/reset/starfive/Kconfig b/drivers/reset/starfive/Kconfig
index cddebdba7177..9d15c4110e40 100644
--- a/drivers/reset/starfive/Kconfig
+++ b/drivers/reset/starfive/Kconfig
@@ -1,8 +1,12 @@
# SPDX-License-Identifier: GPL-2.0-only
+config RESET_STARFIVE_JH71X0
+ bool
+
config RESET_STARFIVE_JH7100
bool "StarFive JH7100 Reset Driver"
depends on SOC_STARFIVE || COMPILE_TEST
+ select RESET_STARFIVE_JH71X0
default SOC_STARFIVE
help
This enables the reset controller driver for the StarFive JH7100 SoC.
diff --git a/drivers/reset/starfive/Makefile b/drivers/reset/starfive/Makefile
index 670d049423f5..f6aa12466fad 100644
--- a/drivers/reset/starfive/Makefile
+++ b/drivers/reset/starfive/Makefile
@@ -1,2 +1,4 @@
# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_RESET_STARFIVE_JH71X0) += reset-starfive-jh71x0.o
+
obj-$(CONFIG_RESET_STARFIVE_JH7100) += reset-starfive-jh7100.o
diff --git a/drivers/reset/starfive/reset-starfive-jh7100.c b/drivers/reset/starfive/reset-starfive-jh7100.c
index fc44b2fb3e03..9d7cb4ed8869 100644
--- a/drivers/reset/starfive/reset-starfive-jh7100.c
+++ b/drivers/reset/starfive/reset-starfive-jh7100.c
@@ -5,14 +5,10 @@
* Copyright (C) 2021 Emil Renner Berthing <kernel@esmil.dk>
*/
-#include <linux/bitmap.h>
-#include <linux/io.h>
-#include <linux/io-64-nonatomic-lo-hi.h>
-#include <linux/iopoll.h>
#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
-#include <linux/reset-controller.h>
-#include <linux/spinlock.h>
+
+#include "reset-starfive-jh71x0.h"
#include <dt-bindings/reset/starfive-jh7100.h>
@@ -48,114 +44,19 @@ static const u64 jh7100_reset_asserted[2] = {
0,
};
-struct jh7100_reset {
- struct reset_controller_dev rcdev;
- /* protect registers against concurrent read-modify-write */
- spinlock_t lock;
- void __iomem *base;
-};
-
-static inline struct jh7100_reset *
-jh7100_reset_from(struct reset_controller_dev *rcdev)
-{
- return container_of(rcdev, struct jh7100_reset, rcdev);
-}
-
-static int jh7100_reset_update(struct reset_controller_dev *rcdev,
- unsigned long id, bool assert)
-{
- struct jh7100_reset *data = jh7100_reset_from(rcdev);
- unsigned long offset = BIT_ULL_WORD(id);
- u64 mask = BIT_ULL_MASK(id);
- void __iomem *reg_assert = data->base + JH7100_RESET_ASSERT0 + offset * sizeof(u64);
- void __iomem *reg_status = data->base + JH7100_RESET_STATUS0 + offset * sizeof(u64);
- u64 done = jh7100_reset_asserted[offset] & mask;
- u64 value;
- unsigned long flags;
- int ret;
-
- if (!assert)
- done ^= mask;
-
- spin_lock_irqsave(&data->lock, flags);
-
- value = readq(reg_assert);
- if (assert)
- value |= mask;
- else
- value &= ~mask;
- writeq(value, reg_assert);
-
- /* if the associated clock is gated, deasserting might otherwise hang forever */
- ret = readq_poll_timeout_atomic(reg_status, value, (value & mask) == done, 0, 1000);
-
- spin_unlock_irqrestore(&data->lock, flags);
- return ret;
-}
-
-static int jh7100_reset_assert(struct reset_controller_dev *rcdev,
- unsigned long id)
-{
- return jh7100_reset_update(rcdev, id, true);
-}
-
-static int jh7100_reset_deassert(struct reset_controller_dev *rcdev,
- unsigned long id)
-{
- return jh7100_reset_update(rcdev, id, false);
-}
-
-static int jh7100_reset_reset(struct reset_controller_dev *rcdev,
- unsigned long id)
-{
- int ret;
-
- ret = jh7100_reset_assert(rcdev, id);
- if (ret)
- return ret;
-
- return jh7100_reset_deassert(rcdev, id);
-}
-
-static int jh7100_reset_status(struct reset_controller_dev *rcdev,
- unsigned long id)
-{
- struct jh7100_reset *data = jh7100_reset_from(rcdev);
- unsigned long offset = BIT_ULL_WORD(id);
- u64 mask = BIT_ULL_MASK(id);
- void __iomem *reg_status = data->base + JH7100_RESET_STATUS0 + offset * sizeof(u64);
- u64 value = readq(reg_status);
-
- return !((value ^ jh7100_reset_asserted[offset]) & mask);
-}
-
-static const struct reset_control_ops jh7100_reset_ops = {
- .assert = jh7100_reset_assert,
- .deassert = jh7100_reset_deassert,
- .reset = jh7100_reset_reset,
- .status = jh7100_reset_status,
-};
-
static int __init jh7100_reset_probe(struct platform_device *pdev)
{
- struct jh7100_reset *data;
-
- data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
- if (!data)
- return -ENOMEM;
-
- data->base = devm_platform_ioremap_resource(pdev, 0);
- if (IS_ERR(data->base))
- return PTR_ERR(data->base);
+ void __iomem *base = devm_platform_ioremap_resource(pdev, 0);
- data->rcdev.ops = &jh7100_reset_ops;
- data->rcdev.owner = THIS_MODULE;
- data->rcdev.nr_resets = JH7100_RSTN_END;
- data->rcdev.dev = &pdev->dev;
- data->rcdev.of_node = pdev->dev.of_node;
- spin_lock_init(&data->lock);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
- return devm_reset_controller_register(&pdev->dev, &data->rcdev);
+ return reset_starfive_jh7100_register(&pdev->dev, pdev->dev.of_node,
+ base + JH7100_RESET_ASSERT0,
+ base + JH7100_RESET_STATUS0,
+ jh7100_reset_asserted,
+ JH7100_RSTN_END,
+ THIS_MODULE);
}
static const struct of_device_id jh7100_reset_dt_ids[] = {
diff --git a/drivers/reset/starfive/reset-starfive-jh7100.c b/drivers/reset/starfive/reset-starfive-jh71x0.c
similarity index 50%
copy from drivers/reset/starfive/reset-starfive-jh7100.c
copy to drivers/reset/starfive/reset-starfive-jh71x0.c
index fc44b2fb3e03..ee8c28f9bcb5 100644
--- a/drivers/reset/starfive/reset-starfive-jh7100.c
+++ b/drivers/reset/starfive/reset-starfive-jh71x0.c
@@ -6,53 +6,20 @@
*/
#include <linux/bitmap.h>
+#include <linux/device.h>
#include <linux/io.h>
#include <linux/io-64-nonatomic-lo-hi.h>
#include <linux/iopoll.h>
-#include <linux/mod_devicetable.h>
-#include <linux/platform_device.h>
#include <linux/reset-controller.h>
#include <linux/spinlock.h>
-#include <dt-bindings/reset/starfive-jh7100.h>
-
-/* register offsets */
-#define JH7100_RESET_ASSERT0 0x00
-#define JH7100_RESET_ASSERT1 0x04
-#define JH7100_RESET_ASSERT2 0x08
-#define JH7100_RESET_ASSERT3 0x0c
-#define JH7100_RESET_STATUS0 0x10
-#define JH7100_RESET_STATUS1 0x14
-#define JH7100_RESET_STATUS2 0x18
-#define JH7100_RESET_STATUS3 0x1c
-
-/*
- * Writing a 1 to the n'th bit of the m'th ASSERT register asserts
- * line 32m + n, and writing a 0 deasserts the same line.
- * Most reset lines have their status inverted so a 0 bit in the STATUS
- * register means the line is asserted and a 1 means it's deasserted. A few
- * lines don't though, so store the expected value of the status registers when
- * all lines are asserted.
- */
-static const u64 jh7100_reset_asserted[2] = {
- /* STATUS0 */
- BIT_ULL_MASK(JH7100_RST_U74) |
- BIT_ULL_MASK(JH7100_RST_VP6_DRESET) |
- BIT_ULL_MASK(JH7100_RST_VP6_BRESET) |
- /* STATUS1 */
- BIT_ULL_MASK(JH7100_RST_HIFI4_DRESET) |
- BIT_ULL_MASK(JH7100_RST_HIFI4_BRESET),
- /* STATUS2 */
- BIT_ULL_MASK(JH7100_RST_E24) |
- /* STATUS3 */
- 0,
-};
-
struct jh7100_reset {
struct reset_controller_dev rcdev;
/* protect registers against concurrent read-modify-write */
spinlock_t lock;
- void __iomem *base;
+ void __iomem *assert;
+ void __iomem *status;
+ const u64 *asserted;
};
static inline struct jh7100_reset *
@@ -67,9 +34,9 @@ static int jh7100_reset_update(struct reset_controller_dev *rcdev,
struct jh7100_reset *data = jh7100_reset_from(rcdev);
unsigned long offset = BIT_ULL_WORD(id);
u64 mask = BIT_ULL_MASK(id);
- void __iomem *reg_assert = data->base + JH7100_RESET_ASSERT0 + offset * sizeof(u64);
- void __iomem *reg_status = data->base + JH7100_RESET_STATUS0 + offset * sizeof(u64);
- u64 done = jh7100_reset_asserted[offset] & mask;
+ void __iomem *reg_assert = data->assert + offset * sizeof(u64);
+ void __iomem *reg_status = data->status + offset * sizeof(u64);
+ u64 done = data->asserted ? data->asserted[offset] & mask : 0;
u64 value;
unsigned long flags;
int ret;
@@ -123,10 +90,10 @@ static int jh7100_reset_status(struct reset_controller_dev *rcdev,
struct jh7100_reset *data = jh7100_reset_from(rcdev);
unsigned long offset = BIT_ULL_WORD(id);
u64 mask = BIT_ULL_MASK(id);
- void __iomem *reg_status = data->base + JH7100_RESET_STATUS0 + offset * sizeof(u64);
+ void __iomem *reg_status = data->status + offset * sizeof(u64);
u64 value = readq(reg_status);
- return !((value ^ jh7100_reset_asserted[offset]) & mask);
+ return !((value ^ data->asserted[offset]) & mask);
}
static const struct reset_control_ops jh7100_reset_ops = {
@@ -136,38 +103,28 @@ static const struct reset_control_ops jh7100_reset_ops = {
.status = jh7100_reset_status,
};
-static int __init jh7100_reset_probe(struct platform_device *pdev)
+int reset_starfive_jh7100_register(struct device *dev, struct device_node *of_node,
+ void __iomem *assert, void __iomem *status,
+ const u64 *asserted, unsigned int nr_resets,
+ struct module *owner)
{
struct jh7100_reset *data;
- data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
- data->base = devm_platform_ioremap_resource(pdev, 0);
- if (IS_ERR(data->base))
- return PTR_ERR(data->base);
-
data->rcdev.ops = &jh7100_reset_ops;
- data->rcdev.owner = THIS_MODULE;
- data->rcdev.nr_resets = JH7100_RSTN_END;
- data->rcdev.dev = &pdev->dev;
- data->rcdev.of_node = pdev->dev.of_node;
+ data->rcdev.owner = owner;
+ data->rcdev.nr_resets = nr_resets;
+ data->rcdev.dev = dev;
+ data->rcdev.of_node = of_node;
+
spin_lock_init(&data->lock);
+ data->assert = assert;
+ data->status = status;
+ data->asserted = asserted;
- return devm_reset_controller_register(&pdev->dev, &data->rcdev);
+ return devm_reset_controller_register(dev, &data->rcdev);
}
-
-static const struct of_device_id jh7100_reset_dt_ids[] = {
- { .compatible = "starfive,jh7100-reset" },
- { /* sentinel */ }
-};
-
-static struct platform_driver jh7100_reset_driver = {
- .driver = {
- .name = "jh7100-reset",
- .of_match_table = jh7100_reset_dt_ids,
- .suppress_bind_attrs = true,
- },
-};
-builtin_platform_driver_probe(jh7100_reset_driver, jh7100_reset_probe);
+EXPORT_SYMBOL_GPL(reset_starfive_jh7100_register);
diff --git a/drivers/reset/starfive/reset-starfive-jh71x0.h b/drivers/reset/starfive/reset-starfive-jh71x0.h
new file mode 100644
index 000000000000..1fc5a648c8d8
--- /dev/null
+++ b/drivers/reset/starfive/reset-starfive-jh71x0.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2021 Emil Renner Berthing <kernel@esmil.dk>
+ */
+
+#ifndef __RESET_STARFIVE_JH71X0_H
+#define __RESET_STARFIVE_JH71X0_H
+
+int reset_starfive_jh7100_register(struct device *dev, struct device_node *of_node,
+ void __iomem *assert, void __iomem *status,
+ const u64 *asserted, unsigned int nr_resets,
+ struct module *owner);
+
+#endif /* __RESET_STARFIVE_JH71X0_H */
--
2.38.1
next prev parent reply other threads:[~2022-12-20 0:51 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-20 0:50 [PATCH v3 00/11] Basic clock and reset support for StarFive JH7110 RISC-V SoC Hal Feng
2022-12-20 0:50 ` [PATCH v3 01/11] clk: starfive: Factor out common JH7100 and JH7110 code Hal Feng
2022-12-20 21:54 ` Conor Dooley
2022-12-20 0:50 ` [PATCH v3 02/11] clk: starfive: Rename "jh7100" to "jh71x0" for the common code Hal Feng
2022-12-20 22:08 ` Conor Dooley
2022-12-23 6:23 ` Hal Feng
2022-12-20 0:50 ` [PATCH v3 03/11] reset: Create subdirectory for StarFive drivers Hal Feng
2022-12-20 22:15 ` Conor Dooley
2022-12-23 7:02 ` Hal Feng
2022-12-20 0:50 ` Hal Feng [this message]
2022-12-20 22:28 ` [PATCH v3 04/11] reset: starfive: Factor out common JH71X0 reset code Conor Dooley
2022-12-23 7:49 ` Hal Feng
2022-12-20 0:50 ` [PATCH v3 05/11] reset: starfive: Rename "jh7100" to "jh71x0" for the common code Hal Feng
2022-12-20 2:40 ` kernel test robot
2022-12-20 22:31 ` Conor Dooley
2022-12-24 3:48 ` kernel test robot
2022-12-20 0:50 ` [PATCH v3 06/11] reset: starfive: jh71x0: Use 32bit I/O on 32bit registers Hal Feng
2022-12-20 22:49 ` Conor Dooley
2022-12-20 0:50 ` [PATCH v3 07/11] dt-bindings: clock: Add StarFive JH7110 system clock and reset generator Hal Feng
2022-12-20 20:12 ` Rob Herring
2022-12-20 23:14 ` Conor Dooley
2022-12-20 23:16 ` Conor Dooley
2022-12-25 16:26 ` Hal Feng
2022-12-27 20:15 ` Conor Dooley
2023-02-16 14:42 ` Hal Feng
2023-02-16 18:20 ` Conor Dooley
2023-02-17 2:27 ` Hal Feng
2023-02-17 7:51 ` Conor Dooley
2023-02-17 12:20 ` Hal Feng
2023-02-17 13:32 ` Conor Dooley
2023-02-17 15:47 ` Krzysztof Kozlowski
2023-02-17 16:27 ` Conor Dooley
2023-02-18 10:20 ` Krzysztof Kozlowski
2023-02-18 11:17 ` Conor Dooley
2023-02-18 14:55 ` Krzysztof Kozlowski
2023-02-18 15:08 ` Conor Dooley
2023-02-21 22:17 ` Stephen Boyd
2023-02-21 23:39 ` Conor Dooley
2023-02-22 13:27 ` Hal Feng
2023-02-22 16:26 ` Conor Dooley
2023-02-23 3:03 ` Hal Feng
2023-02-23 6:18 ` Conor Dooley
2023-02-23 9:52 ` Hal Feng
2022-12-20 0:50 ` [PATCH v3 08/11] dt-bindings: clock: Add StarFive JH7110 always-on " Hal Feng
2022-12-20 20:14 ` Rob Herring
2022-12-20 23:19 ` Conor Dooley
2023-02-16 17:19 ` Hal Feng
2022-12-20 0:50 ` [PATCH v3 09/11] clk: starfive: Add StarFive JH7110 system clock driver Hal Feng
2022-12-23 9:57 ` kernel test robot
2023-01-05 11:32 ` kernel test robot
2023-02-19 21:23 ` Emil Renner Berthing
2023-02-21 6:44 ` Hal Feng
2022-12-20 0:50 ` [PATCH v3 10/11] clk: starfive: Add StarFive JH7110 always-on " Hal Feng
2022-12-23 11:28 ` kernel test robot
2023-01-05 13:44 ` kernel test robot
2022-12-20 0:50 ` [PATCH v3 11/11] reset: starfive: Add StarFive JH7110 reset driver Hal Feng
2022-12-20 7:14 ` kernel test robot
2022-12-23 12:39 ` kernel test robot
2022-12-27 19:20 ` kernel test robot
2023-01-05 15:35 ` kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221220005054.34518-5-hal.feng@starfivetech.com \
--to=hal.feng@starfivetech.com \
--cc=conor@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=emil.renner.berthing@canonical.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=mturquette@baylibre.com \
--cc=p.zabel@pengutronix.de \
--cc=palmer@dabbelt.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).