From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Amit Kucheria <amitk@kernel.org>,
Thara Gopinath <thara.gopinath@gmail.com>,
"Rafael J. Wysocki" <rafael@kernel.org>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Zhang Rui <rui.zhang@intel.com>
Cc: "Bryan O'Donoghue" <bryan.odonoghue@linaro.org>,
linux-arm-msm@vger.kernel.org, linux-pm@vger.kernel.org,
devicetree@vger.kernel.org,
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: [PATCH v4 03/20] dt-bindings: thermal: tsens: add per-sensor cells for msm8974
Date: Wed, 21 Dec 2022 04:05:03 +0200 [thread overview]
Message-ID: <20221221020520.1326964-4-dmitry.baryshkov@linaro.org> (raw)
In-Reply-To: <20221221020520.1326964-1-dmitry.baryshkov@linaro.org>
The msm8974 platform uses two sets of calibration data, add a special
case to handle both of them.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
.../bindings/thermal/qcom-tsens.yaml | 58 +++++++++++++++++++
1 file changed, 58 insertions(+)
diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index da7b5bd4abd5..3e6ba0509bd0 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -91,6 +91,11 @@ properties:
description: |
Reference to nvmem cells for the calibration mode, two calibration
bases and two cells per each sensor
+ # special case for msm8974 / apq8084
+ - maxItems: 51
+ description: |
+ Reference to nvmem cells for the calibration mode, two calibration
+ bases and two cells per each sensor, main and backup copies, plus use_backup cell
nvmem-cell-names:
oneOf:
@@ -137,6 +142,59 @@ properties:
- const: s14_p2
- const: s15_p1
- const: s15_p2
+ # special case for msm8974 / apq8084
+ - items:
+ - const: mode
+ - const: base1
+ - const: base2
+ - const: s0_p1
+ - const: s0_p2
+ - const: s1_p1
+ - const: s1_p2
+ - const: s2_p1
+ - const: s2_p2
+ - const: s3_p1
+ - const: s3_p2
+ - const: s4_p1
+ - const: s4_p2
+ - const: s5_p1
+ - const: s5_p2
+ - const: s6_p1
+ - const: s6_p2
+ - const: s7_p1
+ - const: s7_p2
+ - const: s8_p1
+ - const: s8_p2
+ - const: s9_p1
+ - const: s9_p2
+ - const: s10_p1
+ - const: s10_p2
+ - const: use_backup
+ - const: mode_backup
+ - const: base1_backup
+ - const: base2_backup
+ - const: s0_p1_backup
+ - const: s0_p2_backup
+ - const: s1_p1_backup
+ - const: s1_p2_backup
+ - const: s2_p1_backup
+ - const: s2_p2_backup
+ - const: s3_p1_backup
+ - const: s3_p2_backup
+ - const: s4_p1_backup
+ - const: s4_p2_backup
+ - const: s5_p1_backup
+ - const: s5_p2_backup
+ - const: s6_p1_backup
+ - const: s6_p2_backup
+ - const: s7_p1_backup
+ - const: s7_p2_backup
+ - const: s8_p1_backup
+ - const: s8_p2_backup
+ - const: s9_p1_backup
+ - const: s9_p2_backup
+ - const: s10_p1_backup
+ - const: s10_p2_backup
"#qcom,sensors":
description:
--
2.35.1
next prev parent reply other threads:[~2022-12-21 2:05 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-21 2:05 [PATCH v4 00/15] thermal/drivers/tsens: specify nvmem cells in DT rather than parsing them manually Dmitry Baryshkov
2022-12-21 2:05 ` [PATCH v4 01/20] dt-bindings: thermal: tsens: add msm8956 compat Dmitry Baryshkov
2022-12-21 2:05 ` [PATCH v4 02/20] dt-bindings: thermal: tsens: support per-sensor calibration cells Dmitry Baryshkov
2022-12-21 2:05 ` Dmitry Baryshkov [this message]
2022-12-21 2:05 ` [PATCH v4 04/20] thermal/drivers/tsens: Drop unnecessary hw_ids Dmitry Baryshkov
2022-12-21 2:05 ` [PATCH v4 05/20] thermal/drivers/tsens: Drop msm8976-specific defines Dmitry Baryshkov
2022-12-21 2:05 ` [PATCH v4 06/20] thermal/drivers/tsens: Sort out msm8976 vs msm8956 data Dmitry Baryshkov
2022-12-21 2:05 ` [PATCH v4 07/20] thermal/drivers/tsens: limit num_sensors to 9 Dmitry Baryshkov
2022-12-21 15:45 ` Daniel Lezcano
2022-12-21 18:05 ` Dmitry Baryshkov
2022-12-21 18:15 ` Daniel Lezcano
2022-12-21 19:42 ` Dmitry Baryshkov
2022-12-21 20:13 ` Konrad Dybcio
2022-12-21 2:05 ` [PATCH v4 08/20] thermal/drivers/tsens: fix slope values for msm8939 Dmitry Baryshkov
2022-12-21 20:14 ` Konrad Dybcio
2022-12-21 2:05 ` [PATCH v4 09/20] thermal/drivers/tsens: Support using nvmem cells for calibration data Dmitry Baryshkov
2022-12-21 2:05 ` [PATCH v4 10/20] thermal/drivers/tsens: Support using nvmem cells for msm8974 calibration Dmitry Baryshkov
2022-12-21 2:05 ` [PATCH v4 11/20] thermal/drivers/tsens: Rework legacy calibration data parsers Dmitry Baryshkov
2022-12-21 14:08 ` kernel test robot
2022-12-21 2:05 ` [PATCH v4 12/20] thermal/drivers/tsens: Drop single-cell code for mdm9607 Dmitry Baryshkov
2022-12-21 2:05 ` [PATCH v4 13/20] thermal/drivers/tsens: Drop single-cell code for msm8939 Dmitry Baryshkov
2022-12-21 2:05 ` [PATCH v4 14/20] thermal/drivers/tsens: Drop single-cell code for msm8976/msm8956 Dmitry Baryshkov
2022-12-21 2:05 ` [PATCH v4 15/20] arm64: dts: qcom: msm8956: use SoC-specific compat for tsens Dmitry Baryshkov
2022-12-21 20:15 ` Konrad Dybcio
2022-12-21 2:05 ` [PATCH v4 16/20] arm64: dts: qcom: msm8916: specify per-sensor calibration cells Dmitry Baryshkov
2022-12-21 2:05 ` [PATCH v4 17/20] arm64: dts: qcom: msm8976: " Dmitry Baryshkov
2022-12-21 2:05 ` [PATCH v4 18/20] arm64: dts: qcom: qcs404: " Dmitry Baryshkov
2022-12-21 2:05 ` [PATCH v4 19/20] ARM: dts: qcom-msm8974: " Dmitry Baryshkov
2022-12-21 2:05 ` [PATCH v4 20/20] ARM: dts: qcom-apq8084: " Dmitry Baryshkov
2022-12-21 15:37 ` [PATCH v4 00/15] thermal/drivers/tsens: specify nvmem cells in DT rather than parsing them manually Daniel Lezcano
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221221020520.1326964-4-dmitry.baryshkov@linaro.org \
--to=dmitry.baryshkov@linaro.org \
--cc=agross@kernel.org \
--cc=amitk@kernel.org \
--cc=andersson@kernel.org \
--cc=bryan.odonoghue@linaro.org \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=rafael@kernel.org \
--cc=robh+dt@kernel.org \
--cc=rui.zhang@intel.com \
--cc=thara.gopinath@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).