From: "Sicelo A. Mhlongo" <absicsz@gmail.com>
To: linux-omap@vger.kernel.org
Cc: "Sicelo A. Mhlongo" <absicsz@gmail.com>,
linux-kernel@vger.kernel.org, robh+dt@kernel.org,
krzysztof.kozlowski+dt@linaro.org, tony@atomide.com,
devicetree@vger.kernel.org, maemo-leste@lists.dyne.org,
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: [PATCH v3 2/2] ARM: dts: n900: use iio driver for accelerometer
Date: Thu, 29 Dec 2022 19:13:48 +0200 [thread overview]
Message-ID: <20221229171348.3543327-3-absicsz@gmail.com> (raw)
In-Reply-To: <20221229171348.3543327-1-absicsz@gmail.com>
The accelerometer in the N900 is supported by the iio-framework since commit
8a7449d68670a8f9 ("iio: accel: add support for LIS302DL variant). This commit
switches to it and updates node properties to match the bindings of the new
compatible.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sicelo A. Mhlongo <absicsz@gmail.com>
---
arch/arm/boot/dts/omap3-n900.dts | 52 +++++---------------------------
1 file changed, 8 insertions(+), 44 deletions(-)
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 20d7a7bb6b04..adee3da93421 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -768,55 +768,19 @@ &i2c3 {
clock-frequency = <400000>;
accelerometer@1d {
- compatible = "st,lis3lv02d";
+ compatible = "st,lis302dl";
reg = <0x1d>;
- Vdd-supply = <&vaux1>;
- Vdd_IO-supply = <&vio>;
+ vdd-supply = <&vaux1>;
+ vddio-supply = <&vio>;
interrupt-parent = <&gpio6>;
- interrupts = <21 20>; /* 181 and 180 */
-
- /* click flags */
- st,click-single-x;
- st,click-single-y;
- st,click-single-z;
-
- /* Limits are 0.5g * value */
- st,click-threshold-x = <8>;
- st,click-threshold-y = <8>;
- st,click-threshold-z = <10>;
-
- /* Click must be longer than time limit */
- st,click-time-limit = <9>;
-
- /* Kind of debounce filter */
- st,click-latency = <50>;
-
- /* Interrupt line 2 for click detection */
- st,irq2-click;
-
- st,wakeup-x-hi;
- st,wakeup-y-hi;
- st,wakeup-threshold = <(800/18)>; /* millig-value / 18 to get HW values */
-
- st,wakeup2-z-hi;
- st,wakeup2-threshold = <(900/18)>; /* millig-value / 18 to get HW values */
-
- st,hipass1-disable;
- st,hipass2-disable;
-
- st,axis-x = <1>; /* LIS3_DEV_X */
- st,axis-y = <(-2)>; /* LIS3_INV_DEV_Y */
- st,axis-z = <(-3)>; /* LIS3_INV_DEV_Z */
-
- st,min-limit-x = <(-32)>;
- st,min-limit-y = <3>;
- st,min-limit-z = <3>;
+ interrupts = <21 IRQ_TYPE_EDGE_RISING>,
+ <20 IRQ_TYPE_EDGE_RISING>; /* 181 and 180 */
- st,max-limit-x = <(-3)>;
- st,max-limit-y = <32>;
- st,max-limit-z = <32>;
+ mount-matrix = "-1", "0", "0",
+ "0", "1", "0",
+ "0", "0", "1";
};
cam1: camera@3e {
--
2.39.0
next prev parent reply other threads:[~2022-12-29 17:14 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-29 17:13 [PATCH v3 0/2] ARM: dts: n900: use iio driver for accelerometer Sicelo A. Mhlongo
2022-12-29 17:13 ` [PATCH v3 1/2] ARM: dts: n900: rename accelerometer node Sicelo A. Mhlongo
2022-12-29 17:13 ` Sicelo A. Mhlongo [this message]
2023-01-19 8:33 ` [PATCH v3 0/2] ARM: dts: n900: use iio driver for accelerometer Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221229171348.3543327-3-absicsz@gmail.com \
--to=absicsz@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=maemo-leste@lists.dyne.org \
--cc=robh+dt@kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).