* [PATCH] arm64: dts: imx8mm-beacon: Fix ecspi2 pinmux
@ 2022-12-02 19:10 Adam Ford
2022-12-31 12:44 ` Shawn Guo
0 siblings, 1 reply; 2+ messages in thread
From: Adam Ford @ 2022-12-02 19:10 UTC (permalink / raw)
To: linux-arm-kernel
Cc: cstevens, aford, Adam Ford, Rob Herring, Krzysztof Kozlowski,
Shawn Guo, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
NXP Linux Team, devicetree, linux-kernel
Early hardware did not support hardware handshaking on the UART, but
final production hardware did. When the hardware was updated the chip
select was changed to facilitate hardware handshaking on UART3. Fix the
ecspi2 pin mux to eliminate a pin conflict with UART3 and allow the
EEPROM to operate again.
Fixes: 4ce01ce36d77 ("arm64: dts: imx8mm-beacon: Enable RTS-CTS on UART3")
Signed-off-by: Adam Ford <aford173@gmail.com>
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
index 03266bd90a06..169f047fbca5 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
@@ -120,7 +120,7 @@ &csi {
&ecspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_espi2>;
- cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+ cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
status = "okay";
eeprom@0 {
@@ -316,7 +316,7 @@ pinctrl_espi2: espi2grp {
MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x82
MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x82
MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x82
- MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x41
+ MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x41
>;
};
--
2.34.1
^ permalink raw reply related [flat|nested] 2+ messages in thread* Re: [PATCH] arm64: dts: imx8mm-beacon: Fix ecspi2 pinmux
2022-12-02 19:10 [PATCH] arm64: dts: imx8mm-beacon: Fix ecspi2 pinmux Adam Ford
@ 2022-12-31 12:44 ` Shawn Guo
0 siblings, 0 replies; 2+ messages in thread
From: Shawn Guo @ 2022-12-31 12:44 UTC (permalink / raw)
To: Adam Ford
Cc: linux-arm-kernel, cstevens, aford, Rob Herring,
Krzysztof Kozlowski, Sascha Hauer, Pengutronix Kernel Team,
Fabio Estevam, NXP Linux Team, devicetree, linux-kernel
On Fri, Dec 02, 2022 at 01:10:37PM -0600, Adam Ford wrote:
> Early hardware did not support hardware handshaking on the UART, but
> final production hardware did. When the hardware was updated the chip
> select was changed to facilitate hardware handshaking on UART3. Fix the
> ecspi2 pin mux to eliminate a pin conflict with UART3 and allow the
> EEPROM to operate again.
>
> Fixes: 4ce01ce36d77 ("arm64: dts: imx8mm-beacon: Enable RTS-CTS on UART3")
> Signed-off-by: Adam Ford <aford173@gmail.com>
Applied, thanks!
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2022-12-31 12:44 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2022-12-02 19:10 [PATCH] arm64: dts: imx8mm-beacon: Fix ecspi2 pinmux Adam Ford
2022-12-31 12:44 ` Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).