devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Guenter Roeck <linux@roeck-us.net>
To: Hal Feng <hal.feng@starfivetech.com>
Cc: linux-hwmon@vger.kernel.org, linux-doc@vger.kernel.org,
	linux-riscv@lists.infradead.org, devicetree@vger.kernel.org,
	Jean Delvare <jdelvare@suse.com>,
	Jonathan Corbet <corbet@lwn.net>, Conor Dooley <conor@kernel.org>,
	Paul Walmsley <paul.walmsley@sifive.com>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Emil Renner Berthing <emil.renner.berthing@canonical.com>,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v1 1/4] dt-bindings: hwmon: Add starfive,jh71x0-temp
Date: Tue, 3 Jan 2023 14:14:05 -0800	[thread overview]
Message-ID: <20230103221405.GA217696@roeck-us.net> (raw)
In-Reply-To: <20230103013145.9570-2-hal.feng@starfivetech.com>

On Tue, Jan 03, 2023 at 09:31:42AM +0800, Hal Feng wrote:
> From: Emil Renner Berthing <kernel@esmil.dk>
> 
> Add bindings for the temperature sensor on the StarFive JH7100 and
> JH7110 SoCs.
> 
> Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
> Signed-off-by: Hal Feng <hal.feng@starfivetech.com>

The previous version of this bindings document (v3, 
https://patchwork.kernel.org/project/linux-hwmon/patch/20210726171802.1052716-2-kernel@esmil.dk/
had been reviewed by Rob Herring. Even though this version is named differently
(starfive,jh71x0-temp.yaml instead of starfive,jh7100-temp.yaml), the old version
should be referenced, and there should be a change log.

Guenter

> ---
>  .../bindings/hwmon/starfive,jh71x0-temp.yaml  | 75 +++++++++++++++++++
>  1 file changed, 75 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/hwmon/starfive,jh71x0-temp.yaml
> 
> diff --git a/Documentation/devicetree/bindings/hwmon/starfive,jh71x0-temp.yaml b/Documentation/devicetree/bindings/hwmon/starfive,jh71x0-temp.yaml
> new file mode 100644
> index 000000000000..2600881e2cdc
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/starfive,jh71x0-temp.yaml
> @@ -0,0 +1,75 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/hwmon/starfive,jh71x0-temp.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: StarFive JH71x0 Temperature Sensor
> +
> +maintainers:
> +  - Emil Renner Berthing <kernel@esmil.dk>
> +
> +description: |
> +  StarFive Technology Co. JH71x0 embedded temperature sensor
> +
> +properties:
> +  compatible:
> +    enum:
> +      - starfive,jh7100-temp
> +      - starfive,jh7110-temp
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    minItems: 2
> +    maxItems: 2
> +
> +  clock-names:
> +    items:
> +      - const: "sense"
> +      - const: "bus"
> +
> +  '#thermal-sensor-cells':
> +    const: 0
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  resets:
> +    minItems: 2
> +    maxItems: 2
> +
> +  reset-names:
> +    items:
> +      - const: "sense"
> +      - const: "bus"
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - interrupts
> +  - resets
> +  - reset-names
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/starfive-jh7100.h>
> +    #include <dt-bindings/reset/starfive-jh7100.h>
> +
> +    tmon@124a0000 {
> +        compatible = "starfive,jh7100-temp";
> +        reg = <0x124a0000 0x10000>;
> +        clocks = <&clkgen JH7100_CLK_TEMP_SENSE>,
> +                 <&clkgen JH7100_CLK_TEMP_APB>;
> +        clock-names = "sense", "bus";
> +        #thermal-sensor-cells = <0>;
> +        interrupts = <122>;
> +        resets = <&rstgen JH7100_RSTN_TEMP_SENSE>,
> +                 <&rstgen JH7100_RSTN_TEMP_APB>;
> +        reset-names = "sense", "bus";
> +    };

  reply	other threads:[~2023-01-03 22:14 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-01-03  1:31 [PATCH v1 0/4] Temperature sensor support for StarFive JH7110 RISC-V SoC Hal Feng
2023-01-03  1:31 ` [PATCH v1 1/4] dt-bindings: hwmon: Add starfive,jh71x0-temp Hal Feng
2023-01-03 22:14   ` Guenter Roeck [this message]
2023-02-06 17:16     ` Hal Feng
2023-01-03  1:31 ` [PATCH v1 2/4] hwmon: (sfctemp) Add StarFive JH71x0 temperature sensor Hal Feng
2023-01-03 22:10   ` Guenter Roeck
2023-02-06 17:12     ` Hal Feng
2023-02-06 19:21       ` Guenter Roeck
2023-02-08 12:40         ` Hal Feng
2023-02-08 15:16           ` Guenter Roeck
2023-02-09  6:20             ` Hal Feng
2023-01-03  1:31 ` [PATCH v1 3/4] riscv: dts: starfive: jh7110: Add temperature sensor node Hal Feng
2023-01-03  1:31 ` [PATCH v1 4/4] riscv: dts: starfive: visionfive-2: Add thermal-zones Hal Feng
2023-01-03  1:56 ` [PATCH v1 0/4] Temperature sensor support for StarFive JH7110 RISC-V SoC Guenter Roeck
2023-01-06  1:11   ` Hal Feng
2023-02-07  7:51     ` Hal Feng

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230103221405.GA217696@roeck-us.net \
    --to=linux@roeck-us.net \
    --cc=aou@eecs.berkeley.edu \
    --cc=conor@kernel.org \
    --cc=corbet@lwn.net \
    --cc=devicetree@vger.kernel.org \
    --cc=emil.renner.berthing@canonical.com \
    --cc=hal.feng@starfivetech.com \
    --cc=jdelvare@suse.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=palmer@dabbelt.com \
    --cc=paul.walmsley@sifive.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).