devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Siddharth Vadapalli <s-vadapalli@ti.com>
To: <davem@davemloft.net>, <edumazet@google.com>, <kuba@kernel.org>,
	<pabeni@redhat.com>, <robh+dt@kernel.org>,
	<krzysztof.kozlowski@linaro.org>,
	<krzysztof.kozlowski+dt@linaro.org>, <linux@armlinux.org.uk>,
	<vladimir.oltean@nxp.com>, <vigneshr@ti.com>, <nsekhar@ti.com>
Cc: <netdev@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>, <srk@ti.com>,
	<s-vadapalli@ti.com>
Subject: [PATCH net-next v6 3/3] net: ethernet: ti: am65-cpsw: Add support for SERDES configuration
Date: Wed, 4 Jan 2023 16:04:32 +0530	[thread overview]
Message-ID: <20230104103432.1126403-4-s-vadapalli@ti.com> (raw)
In-Reply-To: <20230104103432.1126403-1-s-vadapalli@ti.com>

Use PHY framework APIs to initialize the SERDES PHY connected to CPSW MAC.

Define the functions am65_cpsw_disable_phy(), am65_cpsw_enable_phy(),
am65_cpsw_disable_serdes_phy() and am65_cpsw_enable_serdes_phy().

Add new member "serdes_phy" to struct "am65_cpsw_slave_data" to store the
SERDES PHY for each port, if it exists. Use it later while disabling the
SERDES PHY for each port.

Power on and initialize the SerDes PHY in am65_cpsw_nuss_init_slave_ports()
by invoking am65_cpsw_enable_serdes_phy().

Power off the SerDes PHY in am65_cpsw_nuss_remove() by invoking
am65_cpsw_disable_serdes_phy().

Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
---
 drivers/net/ethernet/ti/am65-cpsw-nuss.c | 68 ++++++++++++++++++++++++
 drivers/net/ethernet/ti/am65-cpsw-nuss.h |  1 +
 2 files changed, 69 insertions(+)

diff --git a/drivers/net/ethernet/ti/am65-cpsw-nuss.c b/drivers/net/ethernet/ti/am65-cpsw-nuss.c
index 06912363d5d5..1bd11166dc28 100644
--- a/drivers/net/ethernet/ti/am65-cpsw-nuss.c
+++ b/drivers/net/ethernet/ti/am65-cpsw-nuss.c
@@ -1416,6 +1416,68 @@ static const struct net_device_ops am65_cpsw_nuss_netdev_ops = {
 	.ndo_setup_tc           = am65_cpsw_qos_ndo_setup_tc,
 };
 
+static void am65_cpsw_disable_phy(struct phy *phy)
+{
+	phy_power_off(phy);
+	phy_exit(phy);
+}
+
+static int am65_cpsw_enable_phy(struct phy *phy)
+{
+	int ret;
+
+	ret = phy_init(phy);
+	if (ret < 0)
+		return ret;
+
+	ret = phy_power_on(phy);
+	if (ret < 0) {
+		phy_exit(phy);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void am65_cpsw_disable_serdes_phy(struct am65_cpsw_common *common)
+{
+	struct am65_cpsw_port *port;
+	struct phy *phy;
+	int i;
+
+	for (i = 0; i < common->port_num; i++) {
+		port = &common->ports[i];
+		phy = port->slave.serdes_phy;
+		if (phy)
+			am65_cpsw_disable_phy(phy);
+	}
+}
+
+static int am65_cpsw_init_serdes_phy(struct device *dev, struct device_node *port_np,
+				     struct am65_cpsw_port *port)
+{
+	const char *name = "serdes-phy";
+	struct phy *phy;
+	int ret;
+
+	phy = devm_of_phy_get(dev, port_np, name);
+	if (PTR_ERR(phy) == -ENODEV)
+		return 0;
+
+	/* Serdes PHY exists. Store it. */
+	port->slave.serdes_phy = phy;
+
+	ret =  am65_cpsw_enable_phy(phy);
+	if (ret < 0)
+		goto err_phy;
+
+	return 0;
+
+err_phy:
+	devm_phy_put(dev, phy);
+	return ret;
+}
+
 static void am65_cpsw_nuss_mac_config(struct phylink_config *config, unsigned int mode,
 				      const struct phylink_link_state *state)
 {
@@ -1959,6 +2021,11 @@ static int am65_cpsw_nuss_init_slave_ports(struct am65_cpsw_common *common)
 			goto of_node_put;
 		}
 
+		/* Initialize the Serdes PHY for the port */
+		ret = am65_cpsw_init_serdes_phy(dev, port_np, port);
+		if (ret)
+			return ret;
+
 		port->slave.mac_only =
 				of_property_read_bool(port_np, "ti,mac-only");
 
@@ -2878,6 +2945,7 @@ static int am65_cpsw_nuss_remove(struct platform_device *pdev)
 	 */
 	am65_cpsw_nuss_cleanup_ndev(common);
 	am65_cpsw_nuss_phylink_cleanup(common);
+	am65_cpsw_disable_serdes_phy(common);
 
 	of_platform_device_destroy(common->mdio_dev, NULL);
 
diff --git a/drivers/net/ethernet/ti/am65-cpsw-nuss.h b/drivers/net/ethernet/ti/am65-cpsw-nuss.h
index 4b75620f8d28..ed26768a6e51 100644
--- a/drivers/net/ethernet/ti/am65-cpsw-nuss.h
+++ b/drivers/net/ethernet/ti/am65-cpsw-nuss.h
@@ -32,6 +32,7 @@ struct am65_cpsw_slave_data {
 	struct device_node		*phy_node;
 	phy_interface_t			phy_if;
 	struct phy			*ifphy;
+	struct phy			*serdes_phy;
 	bool				rx_pause;
 	bool				tx_pause;
 	u8				mac_addr[ETH_ALEN];
-- 
2.25.1


  parent reply	other threads:[~2023-01-04 10:36 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-01-04 10:34 [PATCH net-next v6 0/3] Add support for QSGMII mode for J721e CPSW9G to am65-cpsw driver Siddharth Vadapalli
2023-01-04 10:34 ` [PATCH net-next v6 1/3] dt-bindings: net: ti: k3-am654-cpsw-nuss: Add J721e CPSW9G support Siddharth Vadapalli
2023-01-17 13:45   ` Geert Uytterhoeven
2023-01-17 17:17     ` Krzysztof Kozlowski
2023-01-18 17:21       ` Raghavendra, Vignesh
2023-01-04 10:34 ` [PATCH net-next v6 2/3] net: ethernet: ti: am65-cpsw: Enable QSGMII mode for J721e CPSW9G Siddharth Vadapalli
2023-01-04 10:34 ` Siddharth Vadapalli [this message]
2023-01-17 13:55   ` [PATCH net-next v6 3/3] net: ethernet: ti: am65-cpsw: Add support for SERDES configuration Geert Uytterhoeven
2023-01-18  5:47     ` Siddharth Vadapalli
2023-01-18 10:27       ` Geert Uytterhoeven
2023-01-18 11:27         ` Siddharth Vadapalli
2023-01-05 11:30 ` [PATCH net-next v6 0/3] Add support for QSGMII mode for J721e CPSW9G to am65-cpsw driver patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230104103432.1126403-4-s-vadapalli@ti.com \
    --to=s-vadapalli@ti.com \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=edumazet@google.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=krzysztof.kozlowski@linaro.org \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=netdev@vger.kernel.org \
    --cc=nsekhar@ti.com \
    --cc=pabeni@redhat.com \
    --cc=robh+dt@kernel.org \
    --cc=srk@ti.com \
    --cc=vigneshr@ti.com \
    --cc=vladimir.oltean@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).