devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Michael Tretter <m.tretter@pengutronix.de>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: linux-media@vger.kernel.org, devicetree@vger.kernel.org,
	Philipp Zabel <p.zabel@pengutronix.de>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Fabio Estevam <festevam@gmail.com>,
	kernel@pengutronix.de, linux-imx@nxp.com,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 0/8] media: imx-pxp: add support for i.MX7D
Date: Fri, 6 Jan 2023 15:42:03 +0100	[thread overview]
Message-ID: <20230106144203.GG24101@pengutronix.de> (raw)
In-Reply-To: <Y7gW/FPqt0CBxu/Q@pendragon.ideasonboard.com>

On Fri, 06 Jan 2023 14:41:32 +0200, Laurent Pinchart wrote:
> Hi Michael,
> 
> On Thu, Jan 05, 2023 at 02:47:21PM +0100, Michael Tretter wrote:
> > This series adds support for the PXP found on the i.MX7D to the imx-pxp
> > driver.
> > 
> > The PXP on the i.MX7D has a few differences compared to the one on the
> > i.MX6ULL. Especially, it has more processing blocks and slightly different
> > multiplexers to route the data between the blocks. Therefore, the driver must
> > configure a different data path depending on the platform.
> > 
> > While the PXP has a version register, the reported version is the same on the
> > i.MX6ULL and the i.MX7D. Therefore, we cannot use the version register to
> > change the driver behavior, but have to use the device tree compatible. The
> > driver still prints the found version to the log to help bringing up the PXP
> > on further platforms.
> > 
> > The patches are inspired by some earlier patches [0] by Laurent to add PXP
> > support to the i.MX7d. Compared to the earlier patches, these patches add
> > different behavior depending on the platform. Furthermore, the patches disable
> > only the LUT block, but keep the rotator block enabled, as it may now be
> > configured via the V4L2 rotate control.
> 
> Sounds good to me.
> 
> > Patch 1 converts the dt-binding to yaml.
> > 
> > Patches 2 to 5 cleanup and refactor the driver in preparation of handling
> > different PXP versions.
> > 
> > Patches 6 and 7 add the handling of different platforms and the i.MX7d
> > specific configuration.
> > 
> > Patch 8 adds the device tree node for the PXP to the i.MX7d device tree.
> 
> I've reviewed the whole series and comments are mostly minor. As you're
> reminding me of the PXP, I'll take this as an opportunity to post
> patches that I've had in my tree for way too long :-) There will be
> minor conflicts with yours, so I'll first rebase them on this series,
> assuming that v2 will be similar in places where conflicts occur.

Thanks for the review! I will send a v2 to address your comments.

Thanks for your other patches as well. I will take a look and probably just
include them in my v2.

Michael

> 
> > Michael
> > 
> > [0] https://lore.kernel.org/linux-media/20200510223100.11641-1-laurent.pinchart@ideasonboard.com/
> > 
> > Michael Tretter (8):
> >   media: dt-bindings: media: fsl-pxp: convert to yaml
> >   media: imx-pxp: detect PXP version
> >   media: imx-pxp: extract helper function to setup data path
> >   media: imx-pxp: explicitly disable unused blocks
> >   media: imx-pxp: disable LUT block
> >   media: imx-pxp: make data_path_ctrl0 platform dependent
> >   media: imx-pxp: add support for i.MX7D
> >   ARM: dts: imx7d: add node for PXP
> > 
> >  .../bindings/media/fsl,imx6ull-pxp.yaml       |  62 ++++++++
> >  .../devicetree/bindings/media/fsl-pxp.txt     |  26 ---
> >  arch/arm/boot/dts/imx7d.dtsi                  |   9 ++
> >  drivers/media/platform/nxp/imx-pxp.c          | 148 +++++++++++++++---
> >  4 files changed, 197 insertions(+), 48 deletions(-)
> >  create mode 100644 Documentation/devicetree/bindings/media/fsl,imx6ull-pxp.yaml
> >  delete mode 100644 Documentation/devicetree/bindings/media/fsl-pxp.txt

      reply	other threads:[~2023-01-06 14:42 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-01-05 13:47 [PATCH 0/8] media: imx-pxp: add support for i.MX7D Michael Tretter
2023-01-05 13:47 ` [PATCH 1/8] media: dt-bindings: media: fsl-pxp: convert to yaml Michael Tretter
2023-01-06  3:18   ` Rob Herring
2023-01-06  8:23     ` Michael Tretter
2023-01-06 11:35   ` Laurent Pinchart
2023-01-06 12:34   ` Krzysztof Kozlowski
2023-01-05 13:47 ` [PATCH 2/8] media: imx-pxp: detect PXP version Michael Tretter
2023-01-06 11:47   ` Laurent Pinchart
2023-01-06 12:28     ` Laurent Pinchart
2023-01-06 14:01       ` Michael Tretter
2023-01-06 18:40         ` Laurent Pinchart
2023-01-05 13:47 ` [PATCH 3/8] media: imx-pxp: extract helper function to setup data path Michael Tretter
2023-01-06 11:59   ` Laurent Pinchart
2023-01-05 13:47 ` [PATCH 4/8] media: imx-pxp: explicitly disable unused blocks Michael Tretter
2023-01-06 12:26   ` Laurent Pinchart
2023-01-06 14:08     ` Michael Tretter
2023-01-06 18:39       ` Laurent Pinchart
2023-01-05 13:47 ` [PATCH 5/8] media: imx-pxp: disable LUT block Michael Tretter
2023-01-06 12:27   ` Laurent Pinchart
2023-01-05 13:47 ` [PATCH 6/8] media: imx-pxp: make data_path_ctrl0 platform dependent Michael Tretter
2023-01-06 12:30   ` Laurent Pinchart
2023-01-06 14:11     ` Michael Tretter
2023-01-06 18:42       ` Laurent Pinchart
2023-01-05 13:47 ` [PATCH 7/8] media: imx-pxp: add support for i.MX7D Michael Tretter
2023-01-06 12:32   ` Laurent Pinchart
2023-01-05 13:47 ` [PATCH 8/8] ARM: dts: imx7d: add node for PXP Michael Tretter
2023-01-06 12:36   ` Laurent Pinchart
2023-01-06 14:36     ` Michael Tretter
2023-01-06 18:43       ` Laurent Pinchart
2023-01-06 12:41 ` [PATCH 0/8] media: imx-pxp: add support for i.MX7D Laurent Pinchart
2023-01-06 14:42   ` Michael Tretter [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230106144203.GG24101@pengutronix.de \
    --to=m.tretter@pengutronix.de \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=p.zabel@pengutronix.de \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).