[PATCH V5 4/6] phy: tegra: xusb: Disable trk clk when not in use

[Jon Hunter <jonathanh@nvidia.com>]

From: Wayne Chang <waynec@nvidia.com>

Pad tracking is a one-time calibration for Tegra186 and Tegra194.
Clk should be disabled after calibration.

Disable clk after calibration.
While at it add 100us delay for HW recording the calibration value.

Signed-off-by: Wayne Chang <waynec@nvidia.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
---
V4 -> V5: no changes
V3 -> V4: no changes
V2 -> V3: no changes
V1 -> V2: update the commit message

 drivers/phy/tegra/xusb-tegra186.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/phy/tegra/xusb-tegra186.c b/drivers/phy/tegra/xusb-tegra186.c
index 6a8bd87cfdbd..c00d14f27ab4 100644
--- a/drivers/phy/tegra/xusb-tegra186.c
+++ b/drivers/phy/tegra/xusb-tegra186.c
@@ -609,6 +609,10 @@ static void tegra186_utmi_bias_pad_power_on(struct tegra_xusb_padctl *padctl)
 	value &= ~USB2_PD_TRK;
 	padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
 
+	udelay(100);
+
+	clk_disable_unprepare(priv->usb2_trk_clk);
+
 	mutex_unlock(&padctl->lock);
 }
 
@@ -633,8 +637,6 @@ static void tegra186_utmi_bias_pad_power_off(struct tegra_xusb_padctl *padctl)
 	value |= USB2_PD_TRK;
 	padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
 
-	clk_disable_unprepare(priv->usb2_trk_clk);
-
 	mutex_unlock(&padctl->lock);
 }
 
-- 
2.25.1