[PATCH 0/2] Support ADC5_BAT_ID_100K_PU and use on PM7250b

[PATCH 0/2] Support ADC5_BAT_ID_100K_PU and use on PM7250b

[Luca Weiss]

Add the bat_id channel to vadc driver and add channel to pm7250b dts.

To: Andy Gross <agross@kernel.org>
To: Bjorn Andersson <andersson@kernel.org>
To: Konrad Dybcio <konrad.dybcio@linaro.org>
To: Jonathan Cameron <jic23@kernel.org>
To: Lars-Peter Clausen <lars@metafoo.de>
To: Rob Herring <robh+dt@kernel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: ~postmarketos/upstreaming@lists.sr.ht
Cc: phone-devel@vger.kernel.org
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-iio@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>

---
Luca Weiss (2):
      iio: adc: qcom-spmi-adc5: define ADC5_BAT_ID_100K_PU channel
      arm64: dts: qcom: pm7250b: Add BAT_ID vadc channel

 arch/arm64/boot/dts/qcom/pm7250b.dtsi | 8 ++++++++
 drivers/iio/adc/qcom-spmi-adc5.c      | 2 ++
 2 files changed, 10 insertions(+)
---
base-commit: 88603b6dc419445847923fcb7fe5080067a30f98
change-id: 20230106-pm7250b-bat_id-1050c2f6d016

Best regards,
-- 
Luca Weiss <luca.weiss@fairphone.com>

[PATCH 1/2] iio: adc: qcom-spmi-adc5: define ADC5_BAT_ID_100K_PU channel

[Luca Weiss]

Define the ADC channel used for battery identification purposes so it
can be used in drivers.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
---
 drivers/iio/adc/qcom-spmi-adc5.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/iio/adc/qcom-spmi-adc5.c b/drivers/iio/adc/qcom-spmi-adc5.c
index 821fee60a765..8c33da9de257 100644
--- a/drivers/iio/adc/qcom-spmi-adc5.c
+++ b/drivers/iio/adc/qcom-spmi-adc5.c
@@ -543,6 +543,8 @@ static const struct adc5_channels adc5_chans_pmic[ADC5_MAX_CHANNEL] = {
 					SCALE_HW_CALIB_DEFAULT)
 	[ADC5_XO_THERM_100K_PU]	= ADC5_CHAN_TEMP("xo_therm", 0,
 					SCALE_HW_CALIB_XOTHERM)
+	[ADC5_BAT_ID_100K_PU]	= ADC5_CHAN_TEMP("bat_id", 0,
+					SCALE_HW_CALIB_DEFAULT)
 	[ADC5_AMUX_THM1_100K_PU] = ADC5_CHAN_TEMP("amux_thm1_100k_pu", 0,
 					SCALE_HW_CALIB_THERM_100K_PULLUP)
 	[ADC5_AMUX_THM2_100K_PU] = ADC5_CHAN_TEMP("amux_thm2_100k_pu", 0,

-- 
2.39.0

Re: [PATCH 1/2] iio: adc: qcom-spmi-adc5: define ADC5_BAT_ID_100K_PU channel

[Jonathan Cameron]

On Fri, 06 Jan 2023 16:39:41 +0100
Luca Weiss <luca.weiss@fairphone.com> wrote:

> Define the ADC channel used for battery identification purposes so it
> can be used in drivers.
> 
> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Applied to the togreg branch of iio.git and pushed out as testing for
0-day to take a look at it.

If anyone else has comments, then there is still time as I won't push
this out as a non-rebasing branch for a few days at least
(and I'm aware I picked it up very quickly :)


Thanks,

Jonathan

> ---
>  drivers/iio/adc/qcom-spmi-adc5.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/iio/adc/qcom-spmi-adc5.c b/drivers/iio/adc/qcom-spmi-adc5.c
> index 821fee60a765..8c33da9de257 100644
> --- a/drivers/iio/adc/qcom-spmi-adc5.c
> +++ b/drivers/iio/adc/qcom-spmi-adc5.c
> @@ -543,6 +543,8 @@ static const struct adc5_channels adc5_chans_pmic[ADC5_MAX_CHANNEL] = {
>  					SCALE_HW_CALIB_DEFAULT)
>  	[ADC5_XO_THERM_100K_PU]	= ADC5_CHAN_TEMP("xo_therm", 0,
>  					SCALE_HW_CALIB_XOTHERM)
> +	[ADC5_BAT_ID_100K_PU]	= ADC5_CHAN_TEMP("bat_id", 0,
> +					SCALE_HW_CALIB_DEFAULT)
>  	[ADC5_AMUX_THM1_100K_PU] = ADC5_CHAN_TEMP("amux_thm1_100k_pu", 0,
>  					SCALE_HW_CALIB_THERM_100K_PULLUP)
>  	[ADC5_AMUX_THM2_100K_PU] = ADC5_CHAN_TEMP("amux_thm2_100k_pu", 0,
> 

[PATCH 2/2] arm64: dts: qcom: pm7250b: Add BAT_ID vadc channel

[Luca Weiss]

Add a node describing the ADC5_BAT_ID_100K_PU channel with the
properties taken from downstream kernel.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
---
 arch/arm64/boot/dts/qcom/pm7250b.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/pm7250b.dtsi b/arch/arm64/boot/dts/qcom/pm7250b.dtsi
index 61f7a6345150..d709d955a2f5 100644
--- a/arch/arm64/boot/dts/qcom/pm7250b.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm7250b.dtsi
@@ -110,6 +110,14 @@ adc-chan@1e {
 				label = "chg_mid";
 			};
 
+			adc-chan@4b {
+				reg = <ADC5_BAT_ID_100K_PU>;
+				qcom,hw-settle-time = <200>;
+				qcom,pre-scaling = <1 1>;
+				qcom,ratiometric;
+				label = "bat_id";
+			};
+
 			adc-chan@83 {
 				reg = <ADC5_VPH_PWR>;
 				qcom,pre-scaling = <1 3>;

-- 
2.39.0

Re: [PATCH 2/2] arm64: dts: qcom: pm7250b: Add BAT_ID vadc channel

[Konrad Dybcio]

On 6.01.2023 16:39, Luca Weiss wrote:
> Add a node describing the ADC5_BAT_ID_100K_PU channel with the
> properties taken from downstream kernel.
> 
> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
>  arch/arm64/boot/dts/qcom/pm7250b.dtsi | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/pm7250b.dtsi b/arch/arm64/boot/dts/qcom/pm7250b.dtsi
> index 61f7a6345150..d709d955a2f5 100644
> --- a/arch/arm64/boot/dts/qcom/pm7250b.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pm7250b.dtsi
> @@ -110,6 +110,14 @@ adc-chan@1e {
>  				label = "chg_mid";
>  			};
>  
> +			adc-chan@4b {
> +				reg = <ADC5_BAT_ID_100K_PU>;
> +				qcom,hw-settle-time = <200>;
> +				qcom,pre-scaling = <1 1>;
> +				qcom,ratiometric;
> +				label = "bat_id";
> +			};
> +
>  			adc-chan@83 {
>  				reg = <ADC5_VPH_PWR>;
>  				qcom,pre-scaling = <1 3>;
> 

Re: (subset) [PATCH 0/2] Support ADC5_BAT_ID_100K_PU and use on PM7250b

[Bjorn Andersson]

On Fri, 06 Jan 2023 16:39:41 +0100, Luca Weiss wrote:
> Add the bat_id channel to vadc driver and add channel to pm7250b dts.
> 
> 

Applied, thanks!

[2/2] arm64: dts: qcom: pm7250b: Add BAT_ID vadc channel
      commit: 7592ba4d3e9bf1cce40323f59e48f4ca03b105e9

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>