[PATCH 2/2] arm64: dts: qcom: ipq8074: correct USB3 QMP PHY-s clock output names

[Robert Marko <robimarko@gmail.com>]

It seems that clock-output-names for the USB3 QMP PHY-s where set without
actually checking what is the GCC clock driver expecting, so clock core
could never actually find the parents for usb0_pipe_clk_src and
usb1_pipe_clk_src clocks in the GCC driver.

So, correct the names to be what the driver expects so that parenting
works.

Before:
gcc_usb0_pipe_clk_src                0        0        0   125000000          0     0  50000         Y
gcc_usb1_pipe_clk_src                0        0        0   125000000          0     0  50000         Y

After:
 usb3phy_0_cc_pipe_clk                1        1        0   125000000          0     0  50000         Y
    usb0_pipe_clk_src                 1        1        0   125000000          0     0  50000         Y
       gcc_usb0_pipe_clk              1        1        0   125000000          0     0  50000         Y
 usb3phy_1_cc_pipe_clk                1        1        0   125000000          0     0  50000         Y
    usb1_pipe_clk_src                 1        1        0   125000000          0     0  50000         Y
       gcc_usb1_pipe_clk              1        1        0   125000000          0     0  50000         Y

Fixes: 5e09bc51d07b ("arm64: dts: ipq8074: enable USB support")
Signed-off-by: Robert Marko <robimarko@gmail.com>
---
 arch/arm64/boot/dts/qcom/ipq8074.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index a0f7460020c2..3d1fccdf37c7 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -263,7 +263,7 @@ usb1_ssphy: phy@58200 {
 				#clock-cells = <0>;
 				clocks = <&gcc GCC_USB1_PIPE_CLK>;
 				clock-names = "pipe0";
-				clock-output-names = "gcc_usb1_pipe_clk_src";
+				clock-output-names = "usb3phy_1_cc_pipe_clk";
 			};
 		};
 
@@ -306,7 +306,7 @@ usb0_ssphy: phy@78200 {
 				#clock-cells = <0>;
 				clocks = <&gcc GCC_USB0_PIPE_CLK>;
 				clock-names = "pipe0";
-				clock-output-names = "gcc_usb0_pipe_clk_src";
+				clock-output-names = "usb3phy_0_cc_pipe_clk";
 			};
 		};
 
-- 
2.39.0