devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Herve Codina <herve.codina@bootlin.com>
To: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Li Yang <leoyang.li@nxp.com>, Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>,
	Christophe Leroy <christophe.leroy@csgroup.eu>,
	Michael Ellerman <mpe@ellerman.id.au>,
	Nicholas Piggin <npiggin@gmail.com>,
	Qiang Zhao <qiang.zhao@nxp.com>, Jaroslav Kysela <perex@perex.cz>,
	Takashi Iwai <tiwai@suse.com>,
	Shengjiu Wang <shengjiu.wang@gmail.com>,
	Xiubo Li <Xiubo.Lee@gmail.com>,
	Fabio Estevam <festevam@gmail.com>,
	Nicolin Chen <nicoleotsuka@gmail.com>,
	linuxppc-dev@lists.ozlabs.org,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, alsa-devel@alsa-project.org,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Subject: Re: [PATCH v2 05/10] dt-bindings: soc: fsl: cpm_qe: Add QMC controller
Date: Tue, 10 Jan 2023 09:06:50 +0100	[thread overview]
Message-ID: <20230110090650.2138edf0@bootlin.com> (raw)
In-Reply-To: <76077f5f-fbda-800b-b8d8-6a3f6600f4d1@linaro.org>

Hi Krzysztof,

On Sun, 8 Jan 2023 16:14:47 +0100
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote:

[...]
> > +
> > +  interrupts:
> > +    description: SCC interrupt line in the CPM interrupt controller  
> 
> Missing constraints.

'maxItems: 1' will be added in v3

> 
> > +
> > +  fsl,cpm-command:
> > +    $ref: /schemas/types.yaml#/definitions/uint32
> > +    description: Cf. soc/fsl/cpm_qe/cpm.txt  
> 
> Missing description.

'fsl,cpm-command' will be removed in v3.
The value needed is determined based on other information.
This is not needed in the DT.

> 
> > +
> > +  tsa:
> > +    $ref: /schemas/types.yaml#/definitions/phandle
> > +    description: phandle to the TSA  
> 
> Missing vendor prefix. Does not look like a generic property.

Will be be changed to 'fsl,tsa'
and also 'tsa-cell-id' will be changed to 'fsl,tsa-cell-id'

> 
[...]
> > +
> > +patternProperties:
> > +  "^channel@([0-9]|[1-5][0-9]|6[0-3])$":
> > +    description:
> > +      A channel managed by this controller
> > +    type: object
> > +
> > +    properties:
> > +      reg:
> > +        minimum: 0
> > +        maximum: 63
> > +        description:
> > +          The channel number
> > +
> > +      fsl,mode:
> > +        $ref: /schemas/types.yaml#/definitions/string
> > +        enum: [transparent, hdlc]
> > +        default: transparent
> > +        description: Operational mode  
> 
> And what do they mean?

I will change with
  description: |
    The channel operational mode
     - hdlc: The channel handles HDLC frames
     - transparent: The channel handles raw data without any processing

> 
> > +
> > +      fsl,reverse-data:
> > +        $ref: /schemas/types.yaml#/definitions/flag
> > +        description:
> > +          The bit order as seen on the channels is reversed,
> > +          transmitting/receiving the MSB of each octet first.
> > +          This flag is used only in 'transparent' mode.
> > +
> > +      tx-ts-mask:  
> 
> Missing vendor prefix.

Will be added, also on rx-ts-mask.

> 
> > +        $ref: /schemas/types.yaml#/definitions/uint64
> > +        description:
> > +          Channel assigned Tx time-slots within the Tx time-slots routed
> > +          by the TSA to this cell.
> > +
> > +      rx-ts-mask:
> > +        $ref: /schemas/types.yaml#/definitions/uint64
> > +        description:
> > +          Channel assigned Rx time-slots within the Rx time-slots routed
> > +          by the TSA to this cell.
> > +
> > +    required:
> > +      - reg
> > +      - tx-ts-mask
> > +      - rx-ts-mask
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - reg-names
> > +  - interrupts
> > +  - tsa
> > +  - tsa-cell-id
> > +  - '#address-cells'
> > +  - '#size-cells'
> > +  - '#chan-cells'
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/soc/fsl-tsa.h>
> > +
> > +    scc_qmc@a60 {  
> 
> No underscores in node names.
> 
> Node names should be generic.
> https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation

Will be changed to qmc@a60

> 
> > +        compatible = "fsl,mpc885-scc-qmc", "fsl,cpm1-scc-qmc";
> > +        reg = <0xa60 0x20>,
> > +              <0x3f00 0xc0>,
> > +              <0x2000 0x1000>;
> > +        reg-names = "scc_regs", "scc_pram", "dpram";
> > +        interrupts = <27>;
> > +        interrupt-parent = <&CPM_PIC>;
> > +        fsl,cpm-command = <0xc0>;
> > +
> > +        #address-cells = <1>;
> > +        #size-cells = <0>;
> > +        #chan-cells = <1>;
> > +
> > +        tsa = <&tsa>;
> > +        tsa-cell-id = <FSL_CPM_TSA_SCC4>;
> > +
> > +        channel@16 {
> > +            /* Ch16 : First 4 even TS from all routed from TSA */
> > +            reg = <16>;
> > +            fsl,mode = "transparent";
> > +            fsl,reverse-data;
> > +            tx-ts-mask = <0x00000000 0x000000AA>;
> > +            rx-ts-mask = <0x00000000 0x000000AA>;  
> 
> Keep case consistent. lower-case hex.

Will be fixed

> 
> Best regards,
> Krzysztof
> 

Thanks for the review,

Best regards,
Hervé

-- 
Hervé Codina, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

  reply	other threads:[~2023-01-10  8:07 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-01-06 16:37 [PATCH v2 00/10] Add the PowerQUICC audio support using the QMC Herve Codina
2023-01-06 16:37 ` [PATCH v2 01/10] dt-bindings: soc: fsl: cpm_qe: Add TSA controller Herve Codina
2023-01-08 15:10   ` Krzysztof Kozlowski
2023-01-10  8:04     ` Herve Codina
2023-01-11  9:56       ` Krzysztof Kozlowski
2023-01-06 16:37 ` [PATCH v2 02/10] soc: fsl: qe: Add support for TSA Herve Codina
2023-01-11 13:47   ` Christophe Leroy
2023-01-11 15:06     ` Herve Codina
2023-01-11 17:16       ` Christophe Leroy
2023-01-06 16:37 ` [PATCH v2 03/10] MAINTAINERS: add the Freescale TSA controller entry Herve Codina
2023-01-06 16:37 ` [PATCH v2 04/10] powerpc/8xx: Use a larger CPM1 command check mask Herve Codina
2023-01-10  8:23   ` Christophe Leroy
2023-01-06 16:37 ` [PATCH v2 05/10] dt-bindings: soc: fsl: cpm_qe: Add QMC controller Herve Codina
2023-01-08 15:14   ` Krzysztof Kozlowski
2023-01-10  8:06     ` Herve Codina [this message]
2023-01-06 16:37 ` [PATCH v2 06/10] soc: fsl: qe: Add support for QMC Herve Codina
2023-01-11 13:58   ` Christophe Leroy
2023-01-11 15:40     ` Herve Codina
2023-01-11 17:34       ` Christophe Leroy
2023-01-06 16:37 ` [PATCH v2 07/10] MAINTAINERS: add the Freescale QMC controller entry Herve Codina
2023-01-06 16:37 ` [PATCH v2 08/10] dt-bindings: sound: Add support for QMC audio Herve Codina
2023-01-08 15:16   ` Krzysztof Kozlowski
2023-01-10  8:07     ` Herve Codina
2023-01-11  9:58       ` Krzysztof Kozlowski
2023-01-06 16:37 ` [PATCH v2 09/10] ASoC: fsl: " Herve Codina
2023-01-06 16:37 ` [PATCH v2 10/10] MAINTAINERS: add the Freescale QMC audio entry Herve Codina

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230110090650.2138edf0@bootlin.com \
    --to=herve.codina@bootlin.com \
    --cc=Xiubo.Lee@gmail.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=christophe.leroy@csgroup.eu \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=krzysztof.kozlowski@linaro.org \
    --cc=leoyang.li@nxp.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=mpe@ellerman.id.au \
    --cc=nicoleotsuka@gmail.com \
    --cc=npiggin@gmail.com \
    --cc=perex@perex.cz \
    --cc=qiang.zhao@nxp.com \
    --cc=robh+dt@kernel.org \
    --cc=shengjiu.wang@gmail.com \
    --cc=thomas.petazzoni@bootlin.com \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).