From: Alexander Stein <alexander.stein@ew.tq-group.com>
To: Geert Uytterhoeven <geert+renesas@glider.be>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Marek Vasut <marex@denx.de>
Cc: Alexander Stein <alexander.stein@ew.tq-group.com>,
linux-renesas-soc@vger.kernel.org, linux-clk@vger.kernel.org,
devicetree@vger.kernel.org
Subject: [PATCH v2 4/4] clk: rs9: Add support for 9FGV0441
Date: Tue, 10 Jan 2023 11:00:03 +0100 [thread overview]
Message-ID: <20230110100003.370917-4-alexander.stein@ew.tq-group.com> (raw)
In-Reply-To: <20230110100003.370917-1-alexander.stein@ew.tq-group.com>
This model is similar to 9FGV0241, but the DIFx bits start at bit 0.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
Changes in v2:
* Adjust to common DIF calculation function
drivers/clk/clk-renesas-pcie.c | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/clk-renesas-pcie.c b/drivers/clk/clk-renesas-pcie.c
index 6b19186228238..a4ebb224181bf 100644
--- a/drivers/clk/clk-renesas-pcie.c
+++ b/drivers/clk/clk-renesas-pcie.c
@@ -6,6 +6,7 @@
* - 9FGV/9DBV/9DMV/9FGL/9DML/9QXL/9SQ
* Currently supported:
* - 9FGV0241
+ * - 9FGV0441
*
* Copyright (C) 2022 Marek Vasut <marex@denx.de>
*/
@@ -51,6 +52,7 @@
/* Supported Renesas 9-series models. */
enum rs9_model {
RENESAS_9FGV0241,
+ RENESAS_9FGV0441,
};
/* Structure to describe features of a particular 9-series model */
@@ -65,7 +67,7 @@ struct rs9_driver_data {
struct regmap *regmap;
const struct rs9_chip_info *chip_info;
struct clk *pin_xin;
- struct clk_hw *clk_dif[2];
+ struct clk_hw *clk_dif[4];
u8 pll_amplitude;
u8 pll_ssc;
u8 clk_dif_sr;
@@ -162,6 +164,8 @@ static u8 rs9_calc_dif(const struct rs9_driver_data *rs9, int idx)
if (model == RENESAS_9FGV0241)
return BIT(idx) + 1;
+ else if (model == RENESAS_9FGV0441)
+ return BIT(idx);
return 0;
}
@@ -381,14 +385,22 @@ static const struct rs9_chip_info renesas_9fgv0241_info = {
.did = RS9_REG_DID_TYPE_FGV | 0x02,
};
+static const struct rs9_chip_info renesas_9fgv0441_info = {
+ .model = RENESAS_9FGV0441,
+ .num_clks = 4,
+ .did = RS9_REG_DID_TYPE_FGV | 0x04,
+};
+
static const struct i2c_device_id rs9_id[] = {
{ "9fgv0241", .driver_data = RENESAS_9FGV0241 },
+ { "9fgv0441", .driver_data = RENESAS_9FGV0441 },
{ }
};
MODULE_DEVICE_TABLE(i2c, rs9_id);
static const struct of_device_id clk_rs9_of_match[] = {
{ .compatible = "renesas,9fgv0241", .data = &renesas_9fgv0241_info },
+ { .compatible = "renesas,9fgv0441", .data = &renesas_9fgv0441_info },
{ }
};
MODULE_DEVICE_TABLE(of, clk_rs9_of_match);
--
2.34.1
next prev parent reply other threads:[~2023-01-10 10:00 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-10 10:00 [PATCH v2 1/4] clk: rs9: Check for vendor/device ID Alexander Stein
2023-01-10 10:00 ` [PATCH v2 2/4] dt-bindings: clk: rs9: Add 9FGV0441 Alexander Stein
2023-01-10 10:29 ` Marek Vasut
2023-01-10 10:00 ` [PATCH v2 3/4] clk: rs9: Support device specific dif bit calculation Alexander Stein
2023-01-10 10:31 ` Marek Vasut
2023-01-10 13:22 ` Alexander Stein
2023-01-10 13:37 ` Marek Vasut
2023-01-10 13:47 ` Alexander Stein
2023-01-10 13:51 ` Marek Vasut
2023-01-10 10:00 ` Alexander Stein [this message]
2023-01-10 10:32 ` [PATCH v2 4/4] clk: rs9: Add support for 9FGV0441 Marek Vasut
2023-01-10 10:28 ` [PATCH v2 1/4] clk: rs9: Check for vendor/device ID Marek Vasut
2023-02-13 7:28 ` Alexander Stein
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230110100003.370917-4-alexander.stein@ew.tq-group.com \
--to=alexander.stein@ew.tq-group.com \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=marex@denx.de \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).