[PATCH v2 10/14] clk: qcom: cpu-8996: fix PLL configuration sequence

[Dmitry Baryshkov <dmitry.baryshkov@linaro.org>]

Switch both power and performance clocks to the GPLL0/2 (sys_apcs_aux)
before PLL configuration. Switch them to the ACD afterwards.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/clk/qcom/clk-cpu-8996.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/clk/qcom/clk-cpu-8996.c b/drivers/clk/qcom/clk-cpu-8996.c
index 571ed52b3026..47c58bb5f21a 100644
--- a/drivers/clk/qcom/clk-cpu-8996.c
+++ b/drivers/clk/qcom/clk-cpu-8996.c
@@ -432,13 +432,27 @@ static int qcom_cpu_clk_msm8996_register_clks(struct device *dev,
 {
 	int i, ret;
 
+	/* Select GPLL0 for 300MHz for the both clusters */
+	regmap_write(regmap, PERFCL_REG_OFFSET + MUX_OFFSET, 0xc);
+	regmap_write(regmap, PWRCL_REG_OFFSET + MUX_OFFSET, 0xc);
+
+	/* Ensure write goes through before PLLs are reconfigured */
+	udelay(5);
+
 	clk_alpha_pll_configure(&pwrcl_pll, regmap, &hfpll_config);
 	clk_alpha_pll_configure(&perfcl_pll, regmap, &hfpll_config);
 	clk_alpha_pll_configure(&pwrcl_alt_pll, regmap, &altpll_config);
 	clk_alpha_pll_configure(&perfcl_alt_pll, regmap, &altpll_config);
 
+	/* Wait for PLL(s) to lock */
+        udelay(50);
+
 	qcom_cpu_clk_msm8996_acd_init(regmap);
 
+	/* Switch clusters to use the ACD leg */
+	regmap_write(regmap, PWRCL_REG_OFFSET + MUX_OFFSET, 0x2);
+	regmap_write(regmap, PERFCL_REG_OFFSET + MUX_OFFSET, 0x2);
+
 	for (i = 0; i < ARRAY_SIZE(cpu_msm8996_hw_clks); i++) {
 		ret = devm_clk_hw_register(dev, cpu_msm8996_hw_clks[i]);
 		if (ret)
-- 
2.30.2