From: Durai Manickam KR <durai.manickamkr@microchip.com>
To: <Hari.PrasathGE@microchip.com>,
<balamanikandan.gunasundar@microchip.com>,
<manikandan.m@microchip.com>, <varshini.rajendran@microchip.com>,
<dharma.b@microchip.com>, <nayabbasha.sayed@microchip.com>,
<balakrishnan.s@microchip.com>, <claudiu.beznea@microchip.com>,
<cristian.birsan@microchip.com>, <nicolas.ferre@microchip.com>,
<krzysztof.kozlowski@linaro.org>, <alexandre.belloni@bootlin.com>,
<davem@davemloft.net>, <arnd@arndb.de>, <olof@lixom.net>,
<soc@kernel.org>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>,
<Kavyasree.Kotagiri@microchip.com>,
<Horatiu.Vultur@microchip.com>, <robh+dt@kernel.org>,
<andrew@lunn.ch>, <michael@walle.cc>, <jerry.ray@microchip.com>
Cc: Durai Manickam KR <durai.manickamkr@microchip.com>
Subject: [PATCH v4 1/8] ARM: dts: at91: sam9x60: Fix the label numbering for the flexcom functions
Date: Thu, 12 Jan 2023 16:32:01 +0530 [thread overview]
Message-ID: <20230112110208.97946-2-durai.manickamkr@microchip.com> (raw)
In-Reply-To: <20230112110208.97946-1-durai.manickamkr@microchip.com>
From: Manikandan Muralidharan <manikandan.m@microchip.com>
Fixed the label numbering of the flexcom functions so that all
13 flexcom functions of sam9x60 are in the following order when the missing
flexcom functions are added:
flx0: uart0, spi0, i2c0
flx1: uart1, spi1, i2c1
flx2: uart2, spi2, i2c2
flx3: uart3, spi3, i2c3
flx4: uart4, spi4, i2c4
flx5: uart5, spi5, i2c5
flx6: uart6, i2c6
flx7: uart7, i2c7
flx8: uart8, i2c8
flx9: uart9, i2c9
flx10: uart10, i2c10
flx11: uart11, i2c11
flx12: uart12, i2c12
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Signed-off-by: Durai Manickam KR <durai.manickamkr@microchip.com>
---
arch/arm/boot/dts/at91-sam9x60ek.dts | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts
index d929c1ba5789..cf5d786531f2 100644
--- a/arch/arm/boot/dts/at91-sam9x60ek.dts
+++ b/arch/arm/boot/dts/at91-sam9x60ek.dts
@@ -16,8 +16,8 @@ / {
aliases {
i2c0 = &i2c0;
- i2c1 = &i2c1;
- serial1 = &uart1;
+ i2c1 = &i2c6;
+ serial1 = &uart5;
};
chosen {
@@ -234,7 +234,7 @@ &flx4 {
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
status = "disabled";
- spi0: spi@400 {
+ spi4: spi@400 {
compatible = "microchip,sam9x60-spi", "atmel,at91rm9200-spi";
reg = <0x400 0x200>;
interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
@@ -253,7 +253,7 @@ &flx5 {
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
status = "okay";
- uart1: serial@200 {
+ uart5: serial@200 {
compatible = "microchip,sam9x60-dbgu", "microchip,sam9x60-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
reg = <0x200 0x200>;
atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
@@ -279,7 +279,7 @@ &flx6 {
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
status = "okay";
- i2c1: i2c@600 {
+ i2c6: i2c@600 {
compatible = "microchip,sam9x60-i2c";
reg = <0x600 0x200>;
interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>;
@@ -439,7 +439,7 @@ AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE
AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;
};
- pinctrl_flx5_default: flx_uart {
+ pinctrl_flx5_default: flx5_uart {
atmel,pins =
<AT91_PIOA 7 AT91_PERIPH_C AT91_PINCTRL_NONE
AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_NONE
--
2.25.1
next prev parent reply other threads:[~2023-01-12 11:11 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-12 11:02 [PATCH v4 0/8] Add support for sam9x60 curiosity board Durai Manickam KR
2023-01-12 11:02 ` Durai Manickam KR [this message]
2023-01-16 9:52 ` [PATCH v4 1/8] ARM: dts: at91: sam9x60: Fix the label numbering for the flexcom functions Claudiu.Beznea
2023-01-12 11:02 ` [PATCH v4 2/8] ARM: dts: at91: sam9x60: move flexcom definitions Durai Manickam KR
2023-01-16 9:50 ` Claudiu.Beznea
2023-01-12 11:02 ` [PATCH v4 3/8] ARM: dts: at91: sam9x60: fix spi4 node Durai Manickam KR
2023-01-16 9:52 ` Claudiu.Beznea
2023-01-12 11:02 ` [PATCH v4 4/8] ARM: dts: at91: sam9x60: Specify the FIFO size for the Flexcom UART Durai Manickam KR
2023-01-16 9:53 ` Claudiu.Beznea
2023-01-12 11:02 ` [PATCH v4 5/8] ARM: dts: at91: sam9x60: Add DMA bindings for the flexcom nodes Durai Manickam KR
2023-01-16 9:56 ` Claudiu.Beznea
2023-01-12 11:02 ` [PATCH v4 6/8] ARM: dts: at91: sam9x60: Add missing flexcom definitions Durai Manickam KR
2023-01-12 11:02 ` [PATCH v4 7/8] dt-bindings: arm: at91: Add info on sam9x60 curiosity Durai Manickam KR
2023-01-12 11:37 ` Krzysztof Kozlowski
2023-01-12 11:02 ` [PATCH v4 8/8] ARM: dts: at91: sam9x60_curiosity: Add device tree for sam9x60 curiosity board Durai Manickam KR
2023-01-16 10:49 ` Claudiu.Beznea
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230112110208.97946-2-durai.manickamkr@microchip.com \
--to=durai.manickamkr@microchip.com \
--cc=Hari.PrasathGE@microchip.com \
--cc=Horatiu.Vultur@microchip.com \
--cc=Kavyasree.Kotagiri@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=andrew@lunn.ch \
--cc=arnd@arndb.de \
--cc=balakrishnan.s@microchip.com \
--cc=balamanikandan.gunasundar@microchip.com \
--cc=claudiu.beznea@microchip.com \
--cc=cristian.birsan@microchip.com \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=dharma.b@microchip.com \
--cc=jerry.ray@microchip.com \
--cc=krzysztof.kozlowski@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=manikandan.m@microchip.com \
--cc=michael@walle.cc \
--cc=nayabbasha.sayed@microchip.com \
--cc=nicolas.ferre@microchip.com \
--cc=olof@lixom.net \
--cc=robh+dt@kernel.org \
--cc=soc@kernel.org \
--cc=varshini.rajendran@microchip.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).