[PATCH v1 19/20] ARM: mach-imx: imx6ul: remove not optional ethernet refclock overwrite

[Oleksij Rempel <o.rempel@pengutronix.de>]

Ethernet refclock direction is board specific and should be configurable
by devicetree. In fact there are board not working with this defaults,
which will be fixed by separate patch.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 arch/arm/mach-imx/mach-imx6ul.c | 20 --------------------
 1 file changed, 20 deletions(-)

diff --git a/arch/arm/mach-imx/mach-imx6ul.c b/arch/arm/mach-imx/mach-imx6ul.c
index 35e81201cb5d..9208a2d6a9da 100644
--- a/arch/arm/mach-imx/mach-imx6ul.c
+++ b/arch/arm/mach-imx/mach-imx6ul.c
@@ -4,8 +4,6 @@
  */
 #include <linux/irqchip.h>
 #include <linux/mfd/syscon.h>
-#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
-#include <linux/micrel_phy.h>
 #include <linux/of_platform.h>
 #include <linux/phy.h>
 #include <linux/regmap.h>
@@ -16,30 +14,12 @@
 #include "cpuidle.h"
 #include "hardware.h"
 
-static void __init imx6ul_enet_clk_init(void)
-{
-	struct regmap *gpr;
-
-	gpr = syscon_regmap_lookup_by_compatible("fsl,imx6ul-iomuxc-gpr");
-	if (!IS_ERR(gpr))
-		regmap_update_bits(gpr, IOMUXC_GPR1, IMX6UL_GPR1_ENET_CLK_DIR,
-				   IMX6UL_GPR1_ENET_CLK_OUTPUT);
-	else
-		pr_err("failed to find fsl,imx6ul-iomux-gpr regmap\n");
-}
-
-static inline void imx6ul_enet_init(void)
-{
-	imx6ul_enet_clk_init();
-}
-
 static void __init imx6ul_init_machine(void)
 {
 	imx_print_silicon_rev(cpu_is_imx6ull() ? "i.MX6ULL" : "i.MX6UL",
 		imx_get_soc_revision());
 
 	of_platform_default_populate(NULL, NULL, NULL);
-	imx6ul_enet_init();
 	imx_anatop_init();
 	imx6ul_pm_init();
 }
-- 
2.30.2