devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sasha Finkelstein <fnkl.kernel@gmail.com>
To: u.kleine-koenig@pengutronix.de, thierry.reding@gmail.com,
	robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org
Cc: marcan@marcan.st, sven@svenpeter.dev, alyssa@rosenzweig.io,
	asahi@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
	linux-pwm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Sasha Finkelstein <fnkl.kernel@gmail.com>
Subject: [PATCH v7 2/5] pwm: Add Apple PWM controller
Date: Sat, 14 Jan 2023 16:25:05 +0300	[thread overview]
Message-ID: <20230114132508.96600-3-fnkl.kernel@gmail.com> (raw)
In-Reply-To: <20230114132508.96600-1-fnkl.kernel@gmail.com>

Adds the Apple PWM controller driver.

Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
Acked-by: Sven Peter <sven@svenpeter.dev>
---
 drivers/pwm/Kconfig     |  12 +++
 drivers/pwm/Makefile    |   1 +
 drivers/pwm/pwm-apple.c | 159 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 172 insertions(+)
 create mode 100644 drivers/pwm/pwm-apple.c

diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index dae023d783a2..8df861b1f4a3 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -51,6 +51,18 @@ config PWM_AB8500
 	  To compile this driver as a module, choose M here: the module
 	  will be called pwm-ab8500.
 
+config PWM_APPLE
+	tristate "Apple SoC PWM support"
+	depends on ARCH_APPLE || COMPILE_TEST
+	help
+	  Generic PWM framework driver for PWM controller present on
+	  Apple SoCs
+
+	  Say Y here if you have an ARM Apple laptop, otherwise say N
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-apple.
+
 config PWM_ATMEL
 	tristate "Atmel PWM support"
 	depends on ARCH_AT91 || COMPILE_TEST
diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
index 7bf1a29f02b8..19899b912e00 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
@@ -2,6 +2,7 @@
 obj-$(CONFIG_PWM)		+= core.o
 obj-$(CONFIG_PWM_SYSFS)		+= sysfs.o
 obj-$(CONFIG_PWM_AB8500)	+= pwm-ab8500.o
+obj-$(CONFIG_PWM_APPLE)		+= pwm-apple.o
 obj-$(CONFIG_PWM_ATMEL)		+= pwm-atmel.o
 obj-$(CONFIG_PWM_ATMEL_HLCDC_PWM)	+= pwm-atmel-hlcdc.o
 obj-$(CONFIG_PWM_ATMEL_TCB)	+= pwm-atmel-tcb.o
diff --git a/drivers/pwm/pwm-apple.c b/drivers/pwm/pwm-apple.c
new file mode 100644
index 000000000000..551e07d49bf7
--- /dev/null
+++ b/drivers/pwm/pwm-apple.c
@@ -0,0 +1,159 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Driver for the Apple SoC PWM controller
+ *
+ * Copyright The Asahi Linux Contributors
+ *
+ * Limitations:
+ * - The writes to cycle registers are shadowed until a write to
+ *   the control register.
+ * - If both OFF_CYCLES and ON_CYCLES are set to 0, the output
+ *   is a constant off signal.
+ * - When APPLE_PWM_CTRL is set to 0, the output is constant low
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/math64.h>
+
+#define APPLE_PWM_CTRL        0x00
+#define APPLE_PWM_ON_CYCLES   0x1c
+#define APPLE_PWM_OFF_CYCLES  0x18
+
+#define APPLE_PWM_CTRL_ENABLE        BIT(0)
+#define APPLE_PWM_CTRL_MODE          BIT(2)
+#define APPLE_PWM_CTRL_UPDATE        BIT(5)
+#define APPLE_PWM_CTRL_TRIGGER       BIT(9)
+#define APPLE_PWM_CTRL_INVERT        BIT(10)
+#define APPLE_PWM_CTRL_OUTPUT_ENABLE BIT(14)
+
+struct apple_pwm {
+	struct pwm_chip chip;
+	void __iomem *base;
+	u64 clkrate;
+};
+
+static inline struct apple_pwm *to_apple_pwm(struct pwm_chip *chip)
+{
+	return container_of(chip, struct apple_pwm, chip);
+}
+
+static int apple_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			   const struct pwm_state *state)
+{
+	struct apple_pwm *fpwm;
+
+	if (state->polarity == PWM_POLARITY_INVERSED)
+		return -EINVAL;
+
+	fpwm = to_apple_pwm(chip);
+	if (state->enabled) {
+		u64 on_cycles, off_cycles;
+
+		on_cycles = mul_u64_u64_div_u64(fpwm->clkrate,
+						state->duty_cycle, NSEC_PER_SEC);
+		if (on_cycles > 0xFFFFFFFF)
+			return -ERANGE;
+
+		off_cycles = mul_u64_u64_div_u64(fpwm->clkrate,
+						 state->period, NSEC_PER_SEC) - on_cycles;
+		if (off_cycles > 0xFFFFFFFF)
+			return -ERANGE;
+
+		writel(on_cycles, fpwm->base + APPLE_PWM_ON_CYCLES);
+		writel(off_cycles, fpwm->base + APPLE_PWM_OFF_CYCLES);
+		writel(APPLE_PWM_CTRL_ENABLE | APPLE_PWM_CTRL_OUTPUT_ENABLE | APPLE_PWM_CTRL_UPDATE,
+		       fpwm->base + APPLE_PWM_CTRL);
+	} else {
+		writel(0, fpwm->base + APPLE_PWM_CTRL);
+	}
+	return 0;
+}
+
+static int apple_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
+			   struct pwm_state *state)
+{
+	struct apple_pwm *fpwm;
+	u32 on_cycles, off_cycles, ctrl;
+
+	fpwm = to_apple_pwm(chip);
+
+	ctrl = readl(fpwm->base + APPLE_PWM_CTRL);
+	on_cycles = readl(fpwm->base + APPLE_PWM_ON_CYCLES);
+	off_cycles = readl(fpwm->base + APPLE_PWM_OFF_CYCLES);
+
+	state->enabled = (ctrl & APPLE_PWM_CTRL_ENABLE) && (ctrl & APPLE_PWM_CTRL_OUTPUT_ENABLE);
+	state->polarity = PWM_POLARITY_NORMAL;
+	// on_cycles + off_cycles is 33 bits, NSEC_PER_SEC is 30, there is no overflow
+	state->duty_cycle = DIV64_U64_ROUND_UP((u64)on_cycles * NSEC_PER_SEC, fpwm->clkrate);
+	state->period = DIV64_U64_ROUND_UP(((u64)off_cycles + (u64)on_cycles) *
+					    NSEC_PER_SEC, fpwm->clkrate);
+
+	return 0;
+}
+
+static const struct pwm_ops apple_pwm_ops = {
+	.apply = apple_pwm_apply,
+	.get_state = apple_pwm_get_state,
+	.owner = THIS_MODULE,
+};
+
+static int apple_pwm_probe(struct platform_device *pdev)
+{
+	struct apple_pwm *fpwm;
+	struct clk *clk;
+	int ret;
+
+	fpwm = devm_kzalloc(&pdev->dev, sizeof(*fpwm), GFP_KERNEL);
+	if (!fpwm)
+		return -ENOMEM;
+
+	fpwm->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(fpwm->base))
+		return PTR_ERR(fpwm->base);
+
+	clk = devm_clk_get_enabled(&pdev->dev, NULL);
+	if (IS_ERR(clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(clk), "unable to get the clock");
+
+	/*
+	 * Uses the 24MHz system clock on all existing devices, can only
+	 * happen if the device tree is broken
+	 *
+	 * This check is done to prevent an overflow in .apply
+	 */
+	fpwm->clkrate = clk_get_rate(clk);
+	if (fpwm->clkrate > NSEC_PER_SEC)
+		return dev_err_probe(&pdev->dev, -EINVAL, "pwm clock out of range");
+
+	fpwm->chip.dev = &pdev->dev;
+	fpwm->chip.npwm = 1;
+	fpwm->chip.ops = &apple_pwm_ops;
+
+	ret = devm_pwmchip_add(&pdev->dev, &fpwm->chip);
+	if (ret < 0)
+		return dev_err_probe(&pdev->dev, ret, "unable to add pwm chip");
+
+	return 0;
+}
+
+static const struct of_device_id apple_pwm_of_match[] = {
+	{ .compatible = "apple,s5l-fpwm" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, apple_pwm_of_match);
+
+static struct platform_driver apple_pwm_driver = {
+	.probe = apple_pwm_probe,
+	.driver = {
+		.name = "apple-pwm",
+		.of_match_table = apple_pwm_of_match,
+	},
+};
+module_platform_driver(apple_pwm_driver);
+
+MODULE_DESCRIPTION("Apple SoC PWM driver");
+MODULE_LICENSE("Dual MIT/GPL");
-- 
2.37.1 (Apple Git-137.1)


  parent reply	other threads:[~2023-01-14 13:27 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-01-14 13:25 [PATCH v7 0/5] PWM and keyboard backlight driver for ARM Macs Sasha Finkelstein
2023-01-14 13:25 ` [PATCH v7 1/5] dt-bindings: pwm: Add Apple PWM controller Sasha Finkelstein
2023-01-14 13:25 ` Sasha Finkelstein [this message]
2023-02-15 11:07   ` [PATCH v7 2/5] " Uwe Kleine-König
2023-03-10 17:37   ` Uwe Kleine-König
2023-01-14 13:25 ` [PATCH v7 3/5] arm64: dts: apple: t8103: Add " Sasha Finkelstein
2023-02-15 11:16   ` Uwe Kleine-König
2023-02-15 16:47     ` Sasha Finkelstein
2023-02-15 18:04       ` Uwe Kleine-König
2023-02-15 18:19         ` Sasha Finkelstein
2023-02-15 18:22           ` Sven Peter
2023-01-14 13:25 ` [PATCH v7 4/5] arm64: dts: apple: t600x: " Sasha Finkelstein
2023-01-14 13:25 ` [PATCH v7 5/5] MAINTAINERS: Add entries for Apple PWM driver Sasha Finkelstein
  -- strict thread matches above, loose matches on Subject: below --
2023-01-25 15:10 [PATCH v7 0/5] PWM and keyboard backlight driver for ARM Macs Sasha Finkelstein
2023-01-25 15:10 ` [PATCH v7 2/5] pwm: Add Apple PWM controller Sasha Finkelstein

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230114132508.96600-3-fnkl.kernel@gmail.com \
    --to=fnkl.kernel@gmail.com \
    --cc=alyssa@rosenzweig.io \
    --cc=asahi@lists.linux.dev \
    --cc=devicetree@vger.kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pwm@vger.kernel.org \
    --cc=marcan@marcan.st \
    --cc=robh+dt@kernel.org \
    --cc=sven@svenpeter.dev \
    --cc=thierry.reding@gmail.com \
    --cc=u.kleine-koenig@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).