From: Abel Vesa <abel.vesa@linaro.org>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
"vkoul@kernel.org" <vkoul@kernel.org>,
Kishon Vijay Abraham I <kishon@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org,
devicetree@vger.kernel.org,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Johan Hovold <johan@kernel.org>,
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Subject: [PATCH v5 5/6] phy: qcom-qmp: pcs-ufs: Add v6 register offsets
Date: Wed, 18 Jan 2023 00:41:47 +0200 [thread overview]
Message-ID: <20230117224148.1914627-6-abel.vesa@linaro.org> (raw)
In-Reply-To: <20230117224148.1914627-1-abel.vesa@linaro.org>
The new SM8550 SoC bumps up the HW version of QMP phy to v6 for USB,
UFS and PCIE g3x2. Add the new PCS UFS specific offsets in a dedicated
header file.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
.../phy/qualcomm/phy-qcom-qmp-pcs-ufs-v6.h | 31 +++++++++++++++++++
drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 1 +
2 files changed, 32 insertions(+)
create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v6.h
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v6.h
new file mode 100644
index 000000000000..c23d5e41e25b
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v6.h
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#ifndef QCOM_PHY_QMP_PCS_UFS_V6_H_
+#define QCOM_PHY_QMP_PCS_UFS_V6_H_
+
+/* Only for QMP V6 PHY - UFS PCS registers */
+#define QPHY_V6_PCS_UFS_PHY_START 0x000
+#define QPHY_V6_PCS_UFS_POWER_DOWN_CONTROL 0x004
+#define QPHY_V6_PCS_UFS_SW_RESET 0x008
+#define QPHY_V6_PCS_UFS_TIMER_20US_CORECLK_STEPS_MSB 0x00c
+#define QPHY_V6_PCS_UFS_TIMER_20US_CORECLK_STEPS_LSB 0x010
+#define QPHY_V6_PCS_UFS_PLL_CNTL 0x02c
+#define QPHY_V6_PCS_UFS_TX_LARGE_AMP_DRV_LVL 0x030
+#define QPHY_V6_PCS_UFS_TX_SMALL_AMP_DRV_LVL 0x038
+#define QPHY_V6_PCS_UFS_BIST_FIXED_PAT_CTRL 0x060
+#define QPHY_V6_PCS_UFS_TX_HSGEAR_CAPABILITY 0x074
+#define QPHY_V6_PCS_UFS_RX_HSGEAR_CAPABILITY 0x0bc
+#define QPHY_V6_PCS_UFS_DEBUG_BUS_CLKSEL 0x158
+#define QPHY_V6_PCS_UFS_LINECFG_DISABLE 0x17c
+#define QPHY_V6_PCS_UFS_RX_MIN_HIBERN8_TIME 0x184
+#define QPHY_V6_PCS_UFS_RX_SIGDET_CTRL2 0x18c
+#define QPHY_V6_PCS_UFS_TX_PWM_GEAR_BAND 0x178
+#define QPHY_V6_PCS_UFS_TX_HS_GEAR_BAND 0x174
+#define QPHY_V6_PCS_UFS_READY_STATUS 0x1a8
+#define QPHY_V6_PCS_UFS_TX_MID_TERM_CTRL1 0x1f4
+#define QPHY_V6_PCS_UFS_MULTI_LANE_CTRL1 0x1fc
+
+#endif
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
index a5cdd58c5b4d..f142235432e1 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
@@ -26,6 +26,7 @@
#include "phy-qcom-qmp-pcs-ufs-v3.h"
#include "phy-qcom-qmp-pcs-ufs-v4.h"
#include "phy-qcom-qmp-pcs-ufs-v5.h"
+#include "phy-qcom-qmp-pcs-ufs-v6.h"
#include "phy-qcom-qmp-qserdes-txrx-ufs-v6.h"
--
2.34.1
next prev parent reply other threads:[~2023-01-17 23:07 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-17 22:41 [PATCH v5 0/6] phy: qualcomm: Add UFS support for SM8550 Abel Vesa
2023-01-17 22:41 ` [PATCH v5 1/6] dt-bindings: phy: Add QMP UFS PHY comptible " Abel Vesa
2023-01-18 8:12 ` Johan Hovold
2023-01-17 22:41 ` [PATCH v5 2/6] phy: qcom-qmp: qserdes-com: Add v6 register offsets Abel Vesa
2023-01-17 22:41 ` [PATCH v5 3/6] phy: qcom-qmp: qserdes-txrx: " Abel Vesa
2023-01-17 22:41 ` [PATCH v5 4/6] phy: qcom-qmp: qserdes-txrx-ufs: " Abel Vesa
2023-01-18 2:11 ` Dmitry Baryshkov
2023-01-17 22:41 ` Abel Vesa [this message]
2023-01-17 22:41 ` [PATCH v5 6/6] phy: qcom-qmp-ufs: Add SM8550 support Abel Vesa
2023-01-18 8:12 ` Johan Hovold
2023-01-18 8:14 ` [PATCH v5 0/6] phy: qualcomm: Add UFS support for SM8550 Johan Hovold
2023-01-18 10:35 ` Abel Vesa
2023-02-02 13:03 ` Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230117224148.1914627-6-abel.vesa@linaro.org \
--to=abel.vesa@linaro.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@linaro.org \
--cc=johan@kernel.org \
--cc=kishon@kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=robh+dt@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).