[PATCH] dt-bindings: clock: qcom,a53pll: drop operating-points-v2

[PATCH] dt-bindings: clock: qcom,a53pll: drop operating-points-v2

[Krzysztof Kozlowski]

The CPU PLL clock node does not use OPP tables (neither driver).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/clock/qcom,a53pll.yaml | 2 --
 1 file changed, 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml b/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml
index 525ebaa93c85..6bf70af948d7 100644
--- a/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,a53pll.yaml
@@ -35,8 +35,6 @@ properties:
     items:
       - const: xo
 
-  operating-points-v2: true
-
 required:
   - compatible
   - reg
-- 
2.34.1

Re: [PATCH] dt-bindings: clock: qcom,a53pll: drop operating-points-v2

[Stephen Boyd]

Quoting Krzysztof Kozlowski (2023-01-13 06:58:59)
> The CPU PLL clock node does not use OPP tables (neither driver).

What device is qcom_a53pll_get_freq_tbl() operating on?

Re: [PATCH] dt-bindings: clock: qcom,a53pll: drop operating-points-v2

[Krzysztof Kozlowski]

On 13/01/2023 21:28, Stephen Boyd wrote:
> Quoting Krzysztof Kozlowski (2023-01-13 06:58:59)
>> The CPU PLL clock node does not use OPP tables (neither driver).
> 
> What device is qcom_a53pll_get_freq_tbl() operating on?

On its own, internal table. While of course driver could be converted to
operating-points-v2, no one did it within last 5 years, so why it should
happen now?

Best regards,
Krzysztof

Re: [PATCH] dt-bindings: clock: qcom,a53pll: drop operating-points-v2

[Stephen Boyd]

Quoting Krzysztof Kozlowski (2023-01-15 06:35:23)
> On 13/01/2023 21:28, Stephen Boyd wrote:
> > Quoting Krzysztof Kozlowski (2023-01-13 06:58:59)
> >> The CPU PLL clock node does not use OPP tables (neither driver).
> > 
> > What device is qcom_a53pll_get_freq_tbl() operating on?
> 
> On its own, internal table. While of course driver could be converted to
> operating-points-v2, no one did it within last 5 years, so why it should
> happen now?
> 

The property was added mid 2021 by Shawn[1], that's not 5 years ago. I
guess there were plans to add an OPP table that never happened[2]? Is
Shawn still working on this? If not, we should revert the OPP code out
of the driver.

[1] https://lore.kernel.org/all/20210704024032.11559-4-shawn.guo@linaro.org/
[2] https://lore.kernel.org/all/20210709021334.GB11342@dragon/

Re: [PATCH] dt-bindings: clock: qcom,a53pll: drop operating-points-v2

[Bjorn Andersson]

On Wed, Jan 18, 2023 at 11:11:00AM -0800, Stephen Boyd wrote:
> Quoting Krzysztof Kozlowski (2023-01-15 06:35:23)
> > On 13/01/2023 21:28, Stephen Boyd wrote:
> > > Quoting Krzysztof Kozlowski (2023-01-13 06:58:59)
> > >> The CPU PLL clock node does not use OPP tables (neither driver).
> > > 
> > > What device is qcom_a53pll_get_freq_tbl() operating on?
> > 
> > On its own, internal table. While of course driver could be converted to
> > operating-points-v2, no one did it within last 5 years, so why it should
> > happen now?
> > 
> 
> The property was added mid 2021 by Shawn[1], that's not 5 years ago. I
> guess there were plans to add an OPP table that never happened[2]? Is
> Shawn still working on this? If not, we should revert the OPP code out
> of the driver.
> 

@Bryan, what do you think about this?

Thanks,
Bjorn

> [1] https://lore.kernel.org/all/20210704024032.11559-4-shawn.guo@linaro.org/
> [2] https://lore.kernel.org/all/20210709021334.GB11342@dragon/

Re: [PATCH] dt-bindings: clock: qcom,a53pll: drop operating-points-v2

[Bryan O'Donoghue]

On 19/01/2023 03:11, Bjorn Andersson wrote:
> On Wed, Jan 18, 2023 at 11:11:00AM -0800, Stephen Boyd wrote:
>> Quoting Krzysztof Kozlowski (2023-01-15 06:35:23)
>>> On 13/01/2023 21:28, Stephen Boyd wrote:
>>>> Quoting Krzysztof Kozlowski (2023-01-13 06:58:59)
>>>>> The CPU PLL clock node does not use OPP tables (neither driver).
>>>>
>>>> What device is qcom_a53pll_get_freq_tbl() operating on?
>>>
>>> On its own, internal table. While of course driver could be converted to
>>> operating-points-v2, no one did it within last 5 years, so why it should
>>> happen now?
>>>
>>
>> The property was added mid 2021 by Shawn[1], that's not 5 years ago. I
>> guess there were plans to add an OPP table that never happened[2]? Is
>> Shawn still working on this? If not, we should revert the OPP code out
>> of the driver.
>>
> 
> @Bryan, what do you think about this?

I'd be in favour of starting the CPR patchset instead, which depends on 
the opps.

I think @Fabien has been waiting on the core 8939 dtsi, I also think the 
dtsi is close enough to merge that we could reasonably initiate the CPR 
stuff.

---
bod

Re: [PATCH] dt-bindings: clock: qcom,a53pll: drop operating-points-v2

[Krzysztof Kozlowski]

On 19/01/2023 11:55, Bryan O'Donoghue wrote:
> On 19/01/2023 03:11, Bjorn Andersson wrote:
>> On Wed, Jan 18, 2023 at 11:11:00AM -0800, Stephen Boyd wrote:
>>> Quoting Krzysztof Kozlowski (2023-01-15 06:35:23)
>>>> On 13/01/2023 21:28, Stephen Boyd wrote:
>>>>> Quoting Krzysztof Kozlowski (2023-01-13 06:58:59)
>>>>>> The CPU PLL clock node does not use OPP tables (neither driver).
>>>>>
>>>>> What device is qcom_a53pll_get_freq_tbl() operating on?
>>>>
>>>> On its own, internal table. While of course driver could be converted to
>>>> operating-points-v2, no one did it within last 5 years, so why it should
>>>> happen now?
>>>>
>>>
>>> The property was added mid 2021 by Shawn[1], that's not 5 years ago. I
>>> guess there were plans to add an OPP table that never happened[2]? Is
>>> Shawn still working on this? If not, we should revert the OPP code out
>>> of the driver.
>>>
>>
>> @Bryan, what do you think about this?
> 
> I'd be in favour of starting the CPR patchset instead, which depends on 
> the opps.
> 
> I think @Fabien has been waiting on the core 8939 dtsi, I also think the 
> dtsi is close enough to merge that we could reasonably initiate the CPR 
> stuff.

So you would make use of operating-points-v2 property? Then probably we
also miss opp-table, but anyway this patch can be dropped then.

Best regards,
Krzysztof

Re: [PATCH] dt-bindings: clock: qcom,a53pll: drop operating-points-v2

[Bryan O'Donoghue]

On 19/01/2023 11:04, Krzysztof Kozlowski wrote:
> On 19/01/2023 11:55, Bryan O'Donoghue wrote:
>> On 19/01/2023 03:11, Bjorn Andersson wrote:
>>> On Wed, Jan 18, 2023 at 11:11:00AM -0800, Stephen Boyd wrote:
>>>> Quoting Krzysztof Kozlowski (2023-01-15 06:35:23)
>>>>> On 13/01/2023 21:28, Stephen Boyd wrote:
>>>>>> Quoting Krzysztof Kozlowski (2023-01-13 06:58:59)
>>>>>>> The CPU PLL clock node does not use OPP tables (neither driver).
>>>>>>
>>>>>> What device is qcom_a53pll_get_freq_tbl() operating on?
>>>>>
>>>>> On its own, internal table. While of course driver could be converted to
>>>>> operating-points-v2, no one did it within last 5 years, so why it should
>>>>> happen now?
>>>>>
>>>>
>>>> The property was added mid 2021 by Shawn[1], that's not 5 years ago. I
>>>> guess there were plans to add an OPP table that never happened[2]? Is
>>>> Shawn still working on this? If not, we should revert the OPP code out
>>>> of the driver.
>>>>
>>>
>>> @Bryan, what do you think about this?
>>
>> I'd be in favour of starting the CPR patchset instead, which depends on
>> the opps.
>>
>> I think @Fabien has been waiting on the core 8939 dtsi, I also think the
>> dtsi is close enough to merge that we could reasonably initiate the CPR
>> stuff.
> 
> So you would make use of operating-points-v2 property? Then probably we
> also miss opp-table, but anyway this patch can be dropped then.
> 
> Best regards,
> Krzysztof
> 


Yep.

Looks something like this.

CPU2: cpu@102 {
     device_type = "cpu";
     compatible = "arm,cortex-a53", "arm,armv8";
     reg = <0x102>;
     next-level-cache = <&L2_1>;
     enable-method = "qcom,kpss-acc-v2";
     qcom,acc = <&acc2>;
     qcom,saw = <&saw2>;
     clocks = <&apcs1>;
     operating-points-v2 = <&cluster1_opp_table>;
     power-domains = <&cpr>;
     power-domain-names = "cpr";
     #cooling-cells = <2>;
     capacity-dmips-mhz = <1024>;
};

cluster1_opp_table: cluster1-opp-table {
     compatible = "operating-points-v2-qcom-cpu";
     opp-shared;

     /* Used by qcom-cpufreq-nvmem.c */
     nvmem-cells = <&cpr_efuse_speedbin_pvs>;
     nvmem-cell-names = "cpr_efuse_speedbin_pvs";

     opp-200000000 {
         opp-hz = /bits/ 64 <200000000>;
         opp-supported-hw = <0x3f>;
         required-opps = <&cpr_opp3>;
     };

     opp-345600000 {
         opp-hz = /bits/ 64 <345600000>;
         opp-supported-hw = <0x3f>;
         required-opps = <&cpr_opp3>;
     };
};

cpr_opp_table: cpr-opp-table {
     compatible = "operating-points-v2-qcom-level";

     cpr_opp1: opp1 {
         opp-hz = /bits/ 64 <200000000>;
             opp-level = <1>;
             qcom,opp-fuse-level = <1>;
         };
     cpr_opp2: opp2 {
         opp-hz = /bits/ 64 <345600000>;
             opp-level = <2>;
             qcom,opp-fuse-level = <1>;
          };
          cpr_opp3: opp3 {
             opp-hz = /bits/ 64 <400000000>;
             opp-level = <3>;
             qcom,opp-fuse-level = <1>;
          };
     };
     /* etc */
};

---
bod

Re: [PATCH] dt-bindings: clock: qcom,a53pll: drop operating-points-v2

[Rob Herring]

On Fri, 13 Jan 2023 15:58:59 +0100, Krzysztof Kozlowski wrote:
> The CPU PLL clock node does not use OPP tables (neither driver).
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  Documentation/devicetree/bindings/clock/qcom,a53pll.yaml | 2 --
>  1 file changed, 2 deletions(-)
> 

Acked-by: Rob Herring <robh@kernel.org>