devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH 1/2] arm64: dts: qcom: sm6115: Add mdss_ prefix to mdss nodes
@ 2023-01-19 10:16 Konrad Dybcio
  2023-01-19 10:16 ` [PATCH 2/2] arm64: dts: qcom: sm6115: Use 64 bit addressing Konrad Dybcio
  2023-02-09  4:22 ` (subset) [PATCH 1/2] arm64: dts: qcom: sm6115: Add mdss_ prefix to mdss nodes Bjorn Andersson
  0 siblings, 2 replies; 3+ messages in thread
From: Konrad Dybcio @ 2023-01-19 10:16 UTC (permalink / raw)
  To: linux-arm-msm, andersson, agross, krzysztof.kozlowski
  Cc: marijn.suijten, bhupesh.sharma, Konrad Dybcio, Rob Herring,
	Krzysztof Kozlowski, devicetree, linux-kernel

Add a mdss_ prefix to mdss nodes to keep them all near each other
when referencing them by label in device DTs.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm6115.dtsi | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
index 08f93b1dc2f8..c0f9bdc25508 100644
--- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -1097,7 +1097,7 @@ ports {
 					port@0 {
 						reg = <0>;
 						dpu_intf1_out: endpoint {
-							remote-endpoint = <&dsi0_in>;
+							remote-endpoint = <&mdss_dsi0_in>;
 						};
 					};
 				};
@@ -1132,7 +1132,7 @@ opp-384000000 {
 				};
 			};
 
-			dsi0: dsi@5e94000 {
+			mdss_dsi0: dsi@5e94000 {
 				compatible = "qcom,dsi-ctrl-6g-qcm2290";
 				reg = <0x05e94000 0x400>;
 				reg-names = "dsi_ctrl";
@@ -1155,11 +1155,11 @@ dsi0: dsi@5e94000 {
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
 
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmpd SM6115_VDDCX>;
-				phys = <&dsi0_phy>;
+				phys = <&mdss_dsi0_phy>;
 
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1172,14 +1172,14 @@ ports {
 
 					port@0 {
 						reg = <0>;
-						dsi0_in: endpoint {
+						mdss_dsi0_in: endpoint {
 							remote-endpoint = <&dpu_intf1_out>;
 						};
 					};
 
 					port@1 {
 						reg = <1>;
-						dsi0_out: endpoint {
+						mdss_dsi0_out: endpoint {
 						};
 					};
 				};
@@ -1204,7 +1204,7 @@ opp-187500000 {
 				};
 			};
 
-			dsi0_phy: phy@5e94400 {
+			mdss_dsi0_phy: phy@5e94400 {
 				compatible = "qcom,dsi-phy-14nm-2290";
 				reg = <0x05e94400 0x100>,
 				      <0x05e94500 0x300>,
@@ -1229,8 +1229,8 @@ dispcc: clock-controller@5f00000 {
 			reg = <0x05f00000 0x20000>;
 			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
 				 <&sleep_clk>,
-				 <&dsi0_phy 0>,
-				 <&dsi0_phy 1>,
+				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi0_phy 1>,
 				 <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
-- 
2.39.1


^ permalink raw reply related	[flat|nested] 3+ messages in thread
end of thread, other threads:[~2023-02-09  4:32 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2023-01-19 10:16 [PATCH 1/2] arm64: dts: qcom: sm6115: Add mdss_ prefix to mdss nodes Konrad Dybcio
2023-01-19 10:16 ` [PATCH 2/2] arm64: dts: qcom: sm6115: Use 64 bit addressing Konrad Dybcio
2023-02-09  4:22 ` (subset) [PATCH 1/2] arm64: dts: qcom: sm6115: Add mdss_ prefix to mdss nodes Bjorn Andersson

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).