public inbox for devicetree@vger.kernel.org
 help / color / mirror / Atom feed
From: Michael Riesch <michael.riesch@wolfvision.net>
To: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
	dri-devel@lists.freedesktop.org
Cc: Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Heiko Stuebner <heiko@sntech.de>,
	Sandy Huang <hjc@rock-chips.com>,
	David Airlie <airlied@gmail.com>, Daniel Vetter <daniel@ffwll.ch>,
	Sascha Hauer <sha@pengutronix.de>,
	Michael Riesch <michael.riesch@wolfvision.net>
Subject: [PATCH v2 6/6] arm64: dts: rockchip: add pinctrls for 16-bit/18-bit rgb interface to rk356x
Date: Thu, 19 Jan 2023 15:39:11 +0100	[thread overview]
Message-ID: <20230119143911.3793654-7-michael.riesch@wolfvision.net> (raw)
In-Reply-To: <20230119143911.3793654-1-michael.riesch@wolfvision.net>

The rk3568-pinctrl.dtsi only defines the 24-bit RGB interface. Add separate
nodes for the 16-bit and 18-bit version, respectively. While at it, split
off the clock/sync signals from the data signals.

The exact mapping of the data pins was discussed here:
https://lore.kernel.org/linux-rockchip/f33a0488-528c-99de-3279-3c0346a03fd6@wolfvision.net/T/

Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
---
v2:
 - no changes

 .../boot/dts/rockchip/rk3568-pinctrl.dtsi     | 94 +++++++++++++++++++
 1 file changed, 94 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-pinctrl.dtsi b/arch/arm64/boot/dts/rockchip/rk3568-pinctrl.dtsi
index 8f90c66dd9e9..0a979bfb63d9 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3568-pinctrl.dtsi
@@ -3117,4 +3117,98 @@ tsadc_pin: tsadc-pin {
 				<0 RK_PA1 0 &pcfg_pull_none>;
 		};
 	};
+
+	lcdc {
+		/omit-if-no-ref/
+		lcdc_clock: lcdc-clock {
+			rockchip,pins =
+				/* lcdc_clk */
+				<3 RK_PA0 1 &pcfg_pull_none>,
+				/* lcdc_den */
+				<3 RK_PC3 1 &pcfg_pull_none>,
+				/* lcdc_hsync */
+				<3 RK_PC1 1 &pcfg_pull_none>,
+				/* lcdc_vsync */
+				<3 RK_PC2 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		lcdc_data16: lcdc-data16 {
+			rockchip,pins =
+				/* lcdc_d3 */
+				<2 RK_PD3 1 &pcfg_pull_none>,
+				/* lcdc_d4 */
+				<2 RK_PD4 1 &pcfg_pull_none>,
+				/* lcdc_d5 */
+				<2 RK_PD5 1 &pcfg_pull_none>,
+				/* lcdc_d6 */
+				<2 RK_PD6 1 &pcfg_pull_none>,
+				/* lcdc_d7 */
+				<2 RK_PD7 1 &pcfg_pull_none>,
+				/* lcdc_d10 */
+				<3 RK_PA3 1 &pcfg_pull_none>,
+				/* lcdc_d11 */
+				<3 RK_PA4 1 &pcfg_pull_none>,
+				/* lcdc_d12 */
+				<3 RK_PA5 1 &pcfg_pull_none>,
+				/* lcdc_d13 */
+				<3 RK_PA6 1 &pcfg_pull_none>,
+				/* lcdc_d14 */
+				<3 RK_PA7 1 &pcfg_pull_none>,
+				/* lcdc_d15 */
+				<3 RK_PB0 1 &pcfg_pull_none>,
+				/* lcdc_d19 */
+				<3 RK_PB4 1 &pcfg_pull_none>,
+				/* lcdc_d20 */
+				<3 RK_PB5 1 &pcfg_pull_none>,
+				/* lcdc_d21 */
+				<3 RK_PB6 1 &pcfg_pull_none>,
+				/* lcdc_d22 */
+				<3 RK_PB7 1 &pcfg_pull_none>,
+				/* lcdc_d23 */
+				<3 RK_PC0 1 &pcfg_pull_none>;
+		};
+
+		/omit-if-no-ref/
+		lcdc_data18: lcdc-data18 {
+			rockchip,pins =
+				/* lcdc_d2 */
+				<2 RK_PD2 1 &pcfg_pull_none>,
+				/* lcdc_d3 */
+				<2 RK_PD3 1 &pcfg_pull_none>,
+				/* lcdc_d4 */
+				<2 RK_PD4 1 &pcfg_pull_none>,
+				/* lcdc_d5 */
+				<2 RK_PD5 1 &pcfg_pull_none>,
+				/* lcdc_d6 */
+				<2 RK_PD6 1 &pcfg_pull_none>,
+				/* lcdc_d7 */
+				<2 RK_PD7 1 &pcfg_pull_none>,
+				/* lcdc_d10 */
+				<3 RK_PA3 1 &pcfg_pull_none>,
+				/* lcdc_d11 */
+				<3 RK_PA4 1 &pcfg_pull_none>,
+				/* lcdc_d12 */
+				<3 RK_PA5 1 &pcfg_pull_none>,
+				/* lcdc_d13 */
+				<3 RK_PA6 1 &pcfg_pull_none>,
+				/* lcdc_d14 */
+				<3 RK_PA7 1 &pcfg_pull_none>,
+				/* lcdc_d15 */
+				<3 RK_PB0 1 &pcfg_pull_none>,
+				/* lcdc_d18 */
+				<3 RK_PB3 1 &pcfg_pull_none>,
+				/* lcdc_d19 */
+				<3 RK_PB4 1 &pcfg_pull_none>,
+				/* lcdc_d20 */
+				<3 RK_PB5 1 &pcfg_pull_none>,
+				/* lcdc_d21 */
+				<3 RK_PB6 1 &pcfg_pull_none>,
+				/* lcdc_d22 */
+				<3 RK_PB7 1 &pcfg_pull_none>,
+				/* lcdc_d23 */
+				<3 RK_PC0 1 &pcfg_pull_none>;
+		};
+	};
+
 };
-- 
2.30.2


      parent reply	other threads:[~2023-01-19 14:42 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-01-19 14:39 [PATCH v2 0/6] drm/rockchip: vop2: add support for the rgb output block Michael Riesch
2023-01-19 14:39 ` [PATCH v2 1/6] drm/rockchip: vop2: initialize possible_crtcs properly Michael Riesch
2023-01-19 14:39 ` [PATCH v2 2/6] drm/rockchip: rgb: embed drm_encoder into rockchip_encoder Michael Riesch
2023-01-19 14:39 ` [PATCH v2 3/6] drm/rockchip: rgb: add video_port parameter to init function Michael Riesch
2023-01-19 14:39 ` [PATCH v2 4/6] drm/rockchip: vop2: use symmetric function pair vop2_{create,destroy}_crtcs Michael Riesch
2023-01-19 14:39 ` [PATCH v2 5/6] drm/rockchip: vop2: add support for the rgb output block Michael Riesch
2023-01-19 15:17   ` Sascha Hauer
2023-01-19 16:14     ` Michael Riesch
2023-01-19 14:39 ` Michael Riesch [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230119143911.3793654-7-michael.riesch@wolfvision.net \
    --to=michael.riesch@wolfvision.net \
    --cc=airlied@gmail.com \
    --cc=daniel@ffwll.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=heiko@sntech.de \
    --cc=hjc@rock-chips.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=robh+dt@kernel.org \
    --cc=sha@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox