[PATCH v2 5/6] arm64: dts: ti: k3-j7200-mcu-wakeup: add VTM node

[Bryan Brattlof <bb@ti.com>]

The j7200 supports a single Voltage and Thermal Management (VTM) device
located in the wakeup domain with three associated temperature monitors
located in various hot spots on the die.

Signed-off-by: Bryan Brattlof <bb@ti.com>
---
 .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi      |  8 ++++
 arch/arm64/boot/dts/ti/k3-j7200-thermal.dtsi  | 47 +++++++++++++++++++
 arch/arm64/boot/dts/ti/k3-j7200.dtsi          |  2 +
 3 files changed, 57 insertions(+)
 create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-thermal.dtsi

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
index fe669deba4896..1eb16542bf9f1 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
@@ -399,4 +399,12 @@ rng: rng@40910000 {
 			status = "disabled"; /* Used by OP-TEE */
 		};
 	};
+
+	wkup_vtm0: temperature-sensor@42040000 {
+		compatible = "ti,j7200-vtm";
+		reg = <0x00 0x42040000 0x00 0x350>,
+		      <0x00 0x42050000 0x00 0x350>;
+		power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>;
+		#thermal-sensor-cells = <1>;
+	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-thermal.dtsi
new file mode 100644
index 0000000000000..c271cbb72db68
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j7200-thermal.dtsi
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/thermal/thermal.h>
+
+thermal_zones: thermal-zones {
+	mcu_thermal: mcu-thermal {
+		polling-delay-passive = <250>;	/* milliSeconds */
+		polling-delay = <500>;		/* milliSeconds */
+		thermal-sensors = <&wkup_vtm0 0>;
+
+		trips {
+			wkup_crit: wkup-crit {
+				temperature = <125000>;	/* milliCelsius */
+				hysteresis = <2000>;	/* milliCelsius */
+				type = "critical";
+			};
+		};
+	};
+
+	mpu_thermal: mpu-thermal {
+		polling-delay-passive = <250>;	/* milliSeconds */
+		polling-delay = <500>;		/* milliSeconds */
+		thermal-sensors = <&wkup_vtm0 1>;
+
+		trips {
+			mpu_crit: mpu-crit {
+				temperature = <125000>;	/* milliCelsius */
+				hysteresis = <2000>;	/* milliCelsius */
+				type = "critical";
+			};
+		};
+	};
+
+	main_thermal: main-thermal {
+		polling-delay-passive = <250>;	/* milliSeconds */
+		polling-delay = <500>;		/* milliSeconds */
+		thermal-sensors = <&wkup_vtm0 2>;
+
+		trips {
+			c7x_crit: c7x-crit {
+				temperature = <125000>;	/* milliCelsius */
+				hysteresis = <2000>;	/* milliCelsius */
+				type = "critical";
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j7200.dtsi b/arch/arm64/boot/dts/ti/k3-j7200.dtsi
index b6da0454cc5bd..2abc872ecec08 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200.dtsi
@@ -168,6 +168,8 @@ cbass_mcu_wakeup: bus@28380000 {
 				 <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; /* FSS OSPI1 data region 3 */
 		};
 	};
+
+	#include "k3-j7200-thermal.dtsi"
 };
 
 /* Now include the peripherals for each bus segments */
-- 
2.39.0