From: Herve Codina <herve.codina@bootlin.com>
To: Herve Codina <herve.codina@bootlin.com>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Linus Walleij <linus.walleij@linaro.org>,
Bartosz Golaszewski <brgl@bgdev.pl>,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>
Cc: alsa-devel@alsa-project.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org,
Christophe Leroy <christophe.leroy@csgroup.eu>,
Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Subject: [PATCH v2 1/3] dt-bindings: sound: Add Renesas IDT821034 codec
Date: Fri, 20 Jan 2023 10:50:34 +0100 [thread overview]
Message-ID: <20230120095036.514639-2-herve.codina@bootlin.com> (raw)
In-Reply-To: <20230120095036.514639-1-herve.codina@bootlin.com>
The Renesas IDT821034 codec is a quad PCM codec with programmable
gain.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
---
.../bindings/sound/renesas,idt821034.yaml | 75 +++++++++++++++++++
1 file changed, 75 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/renesas,idt821034.yaml
diff --git a/Documentation/devicetree/bindings/sound/renesas,idt821034.yaml b/Documentation/devicetree/bindings/sound/renesas,idt821034.yaml
new file mode 100644
index 000000000000..10677d9d8f67
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/renesas,idt821034.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/renesas,idt821034.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas IDT821034 codec device
+
+maintainers:
+ - Herve Codina <herve.codina@bootlin.com>
+
+description: |
+ The IDT821034 codec is a four channel PCM codec with onchip filters and
+ programmable gain setting.
+
+ The time-slots used by the codec must be set and so, the properties
+ 'dai-tdm-slot-num', 'dai-tdm-slot-width', 'dai-tdm-slot-tx-mask' and
+ 'dai-tdm-slot-rx-mask' must be present in the ALSA sound card node for
+ sub-nodes that involve the codec. The codec uses one 8bit time-slot per
+ channel.
+ 'dai-tdm-tdm-slot-with' must be set to 8.
+
+ The IDT821034 codec also supports 5 gpios (SLIC signals) per channel.
+
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+ - $ref: dai-common.yaml#
+
+properties:
+ compatible:
+ const: renesas,idt821034
+
+ reg:
+ description:
+ SPI device address.
+ maxItems: 1
+
+ spi-max-frequency:
+ maximum: 8192000
+
+ spi-cpha: true
+
+ '#sound-dai-cells':
+ const: 0
+
+ '#gpio-cells':
+ const: 2
+
+ gpio-controller: true
+
+required:
+ - compatible
+ - reg
+ - spi-cpha
+ - '#sound-dai-cells'
+ - gpio-controller
+ - '#gpio-cells'
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ spi0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ audio-codec@0 {
+ compatible = "renesas,idt821034";
+ reg = <0>;
+ spi-max-frequency = <8192000>;
+ spi-cpha;
+ #sound-dai-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
--
2.39.0
next prev parent reply other threads:[~2023-01-20 9:50 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-20 9:50 [PATCH v2 0/3] Add the Renesas IDT821034 codec support Herve Codina
2023-01-20 9:50 ` Herve Codina [this message]
2023-01-22 13:46 ` [PATCH v2 1/3] dt-bindings: sound: Add Renesas IDT821034 codec Krzysztof Kozlowski
2023-01-20 9:50 ` [PATCH v2 2/3] ASoC: codecs: Add support for the " Herve Codina
2023-01-20 12:12 ` Mark Brown
2023-01-20 13:13 ` Herve Codina
2023-01-23 7:53 ` Christophe Leroy
2023-01-23 8:56 ` Herve Codina
2023-01-23 10:47 ` Christophe Leroy
2023-01-23 11:13 ` Christophe Leroy
2023-01-23 12:17 ` Herve Codina
2023-01-23 12:30 ` Christophe Leroy
2023-01-23 12:59 ` Herve Codina
2023-01-23 13:53 ` Christophe Leroy
2023-01-20 9:50 ` [PATCH v2 3/3] MAINTAINERS: add the Renesas IDT821034 codec entry Herve Codina
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230120095036.514639-2-herve.codina@bootlin.com \
--to=herve.codina@bootlin.com \
--cc=alsa-devel@alsa-project.org \
--cc=brgl@bgdev.pl \
--cc=broonie@kernel.org \
--cc=christophe.leroy@csgroup.eu \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=perex@perex.cz \
--cc=robh+dt@kernel.org \
--cc=thomas.petazzoni@bootlin.com \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).