From: Thierry Reding <thierry.reding@gmail.com>
To: David Airlie <airlied@redhat.com>,
Daniel Vetter <daniel@ffwll.ch>,
Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jon Hunter <jonathanh@nvidia.com>,
Robin Murphy <robin.murphy@arm.com>,
dri-devel@lists.freedesktop.org, linux-tegra@vger.kernel.org,
devicetree@vger.kernel.org
Subject: [PATCH v4 8/8] arm64: tegra: Add simple framebuffer on Jetson Xavier NX
Date: Fri, 20 Jan 2023 18:31:03 +0100 [thread overview]
Message-ID: <20230120173103.4002342-9-thierry.reding@gmail.com> (raw)
In-Reply-To: <20230120173103.4002342-1-thierry.reding@gmail.com>
From: Thierry Reding <treding@nvidia.com>
Add the framebuffer carveout reserved memory node as well as a simple-
framebuffer node that is used to bind to the framebuffer that the
bootloader has set up.
Signed-off-by: Thierry Reding <treding@nvidia.com>
---
Changes in v2:
- clear out dynamic fields and leave it up to firmware to fill them in
- mark simple-framebuffer node as disabled by default
.../nvidia/tegra194-p3509-0000+p3668-0001.dts | 43 +++++++++++++++++++
arch/arm64/boot/dts/nvidia/tegra194.dtsi | 2 +-
2 files changed, 44 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0001.dts b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0001.dts
index 238fd98e8e45..85b4aaa2ad4e 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0001.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0001.dts
@@ -7,4 +7,47 @@
/ {
model = "NVIDIA Jetson Xavier NX Developer Kit (eMMC)";
compatible = "nvidia,p3509-0000+p3668-0001", "nvidia,tegra194";
+
+ chosen {
+ framebuffer {
+ compatible = "simple-framebuffer";
+ status = "disabled";
+ memory-region = <&fb>;
+ power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
+ clocks = <&bpmp TEGRA194_CLK_SOR1_REF>,
+ <&bpmp TEGRA194_CLK_SOR1_OUT>,
+ <&bpmp TEGRA194_CLK_SOR1_PAD_CLKOUT>,
+ <&bpmp TEGRA194_CLK_PLLD2>,
+ <&bpmp TEGRA194_CLK_PLLDP>,
+ <&bpmp TEGRA194_CLK_NVDISPLAY_DISP>,
+ <&bpmp TEGRA194_CLK_NVDISPLAYHUB>,
+ <&bpmp TEGRA194_CLK_NVDISPLAY_P0>;
+ width = <0>;
+ height = <0>;
+ stride = <0>;
+ format = "x8b8g8r8";
+ };
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ fb: framebuffer@0,0 {
+ compatible = "framebuffer";
+ reg = <0x0 0x0 0x0 0x0>;
+ iommu-addresses = <&dc0 0x0 0x0 0x0 0x0>;
+ };
+ };
+
+ bus@0 {
+ host1x@13e00000 {
+ display-hub@15200000 {
+ display@15200000 {
+ memory-region = <&fb>;
+ };
+ };
+ };
+ };
};
diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
index 5ce2650128b1..e0ce54eae17d 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -1975,7 +1975,7 @@ display-hub@15200000 {
#size-cells = <2>;
ranges = <0x0 0x15200000 0x0 0x15200000 0x0 0x40000>;
- display@15200000 {
+ dc0: display@15200000 {
compatible = "nvidia,tegra194-dc";
reg = <0x0 0x15200000 0x0 0x10000>;
interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
--
2.39.0
prev parent reply other threads:[~2023-01-20 17:31 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-20 17:30 [PATCH v4 0/8] drm/simpledrm: Support system memory framebuffers Thierry Reding
2023-01-20 17:30 ` [PATCH v4 1/8] dt-bindings: display: simple-framebuffer: " Thierry Reding
2023-01-20 17:30 ` [PATCH v4 2/8] dt-bindings: display: simple-framebuffer: Document 32-bit BGR format Thierry Reding
2023-01-20 17:30 ` [PATCH v4 3/8] dt-bindings: reserved-memory: Support framebuffer reserved memory Thierry Reding
2023-01-20 17:30 ` [PATCH v4 4/8] drm/simpledrm: Use struct iosys_map consistently Thierry Reding
2023-01-20 17:31 ` [PATCH v4 5/8] drm/simpledrm: Add support for system memory framebuffers Thierry Reding
2023-01-20 17:31 ` [PATCH v4 6/8] drm/format-helper: Support the AB24/XB24 formats Thierry Reding
2023-01-20 17:31 ` [PATCH v4 7/8] drm/simpledrm: Support the XB24/AB24 format Thierry Reding
2023-01-23 9:16 ` Thomas Zimmermann
2023-01-23 15:19 ` Thierry Reding
2023-01-20 17:31 ` Thierry Reding [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230120173103.4002342-9-thierry.reding@gmail.com \
--to=thierry.reding@gmail.com \
--cc=airlied@redhat.com \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=jonathanh@nvidia.com \
--cc=linux-tegra@vger.kernel.org \
--cc=robin.murphy@arm.com \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).