From: Rayyan Ansari <rayyan@ansari.sh>
To: dri-devel@lists.freedesktop.org
Cc: ~postmarketos/upstreaming@lists.sr.ht, asahi@lists.linux.dev,
janne@jannau.net, Rayyan Ansari <rayyan@ansari.sh>,
Daniel Vetter <daniel@ffwll.ch>, David Airlie <airlied@gmail.com>,
devicetree@vger.kernel.org, Hans de Goede <hdegoede@redhat.com>,
Javier Martinez Canillas <javierm@redhat.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
linux-fbdev@vger.kernel.org, linux-kernel@vger.kernel.org,
Rob Herring <robh+dt@kernel.org>,
Thomas Zimmermann <tzimmermann@suse.de>
Subject: [PATCH v2 1/2] drm/simpledrm: Allow physical width and height configuration via DT
Date: Sat, 21 Jan 2023 15:35:43 +0000 [thread overview]
Message-ID: <20230121153544.467126-2-rayyan@ansari.sh> (raw)
In-Reply-To: <20230121153544.467126-1-rayyan@ansari.sh>
Signed-off-by: Rayyan Ansari <rayyan@ansari.sh>
---
drivers/gpu/drm/tiny/simpledrm.c | 60 +++++++++++++++++++++++++++-----
1 file changed, 51 insertions(+), 9 deletions(-)
diff --git a/drivers/gpu/drm/tiny/simpledrm.c b/drivers/gpu/drm/tiny/simpledrm.c
index 162eb44dcba8..7aab7fa572f0 100644
--- a/drivers/gpu/drm/tiny/simpledrm.c
+++ b/drivers/gpu/drm/tiny/simpledrm.c
@@ -128,6 +128,23 @@ simplefb_read_u32_of(struct drm_device *dev, struct device_node *of_node,
return ret;
}
+static int
+simplefb_read_u32_of_opt(struct drm_device *dev, struct device_node *of_node,
+ const char *name, u32 *value)
+{
+ int ret = of_property_read_u32(of_node, name, value);
+
+ if (ret == -EINVAL) {
+ *value = 0;
+ ret = 0;
+ } else if (ret) {
+ drm_err(dev, "simplefb: cannot parse framebuffer %s: error %d\n",
+ name, ret);
+ }
+
+ return ret;
+}
+
static int
simplefb_read_string_of(struct drm_device *dev, struct device_node *of_node,
const char *name, const char **value)
@@ -184,6 +201,19 @@ simplefb_get_format_of(struct drm_device *dev, struct device_node *of_node)
return simplefb_get_validated_format(dev, format);
}
+static int
+simplefb_get_mm_of(struct drm_device *dev, struct device_node *of_node,
+ const char *name)
+{
+ int mm;
+ int ret = simplefb_read_u32_of_opt(dev, of_node, name, &mm);
+
+ if (ret)
+ return ret;
+ return simplefb_get_validated_int(dev, name, mm);
+}
+
+
/*
* Simple Framebuffer device
*/
@@ -599,16 +629,12 @@ static const struct drm_mode_config_funcs simpledrm_mode_config_funcs = {
*/
static struct drm_display_mode simpledrm_mode(unsigned int width,
- unsigned int height)
+ unsigned int height,
+ unsigned int width_mm,
+ unsigned int height_mm)
{
- /*
- * Assume a monitor resolution of 96 dpi to
- * get a somewhat reasonable screen size.
- */
const struct drm_display_mode mode = {
- DRM_MODE_INIT(60, width, height,
- DRM_MODE_RES_MM(width, 96ul),
- DRM_MODE_RES_MM(height, 96ul))
+ DRM_MODE_INIT(60, width, height, width_mm, height_mm)
};
return mode;
@@ -622,6 +648,7 @@ static struct simpledrm_device *simpledrm_device_create(struct drm_driver *drv,
struct simpledrm_device *sdev;
struct drm_device *dev;
int width, height, stride;
+ int width_mm = 0, height_mm = 0;
const struct drm_format_info *format;
struct resource *res, *mem;
void __iomem *screen_base;
@@ -676,6 +703,12 @@ static struct simpledrm_device *simpledrm_device_create(struct drm_driver *drv,
format = simplefb_get_format_of(dev, of_node);
if (IS_ERR(format))
return ERR_CAST(format);
+ width_mm = simplefb_get_mm_of(dev, of_node, "width-mm");
+ if (width_mm < 0)
+ return ERR_PTR(width_mm);
+ height_mm = simplefb_get_mm_of(dev, of_node, "height-mm");
+ if (height_mm < 0)
+ return ERR_PTR(height_mm);
} else {
drm_err(dev, "no simplefb configuration found\n");
return ERR_PTR(-ENODEV);
@@ -686,7 +719,16 @@ static struct simpledrm_device *simpledrm_device_create(struct drm_driver *drv,
return ERR_PTR(-EINVAL);
}
- sdev->mode = simpledrm_mode(width, height);
+ /*
+ * Assume a monitor resolution of 96 dpi if physical dimensions
+ * are not specified to get a somewhat reasonable screen size.
+ */
+ if (!width_mm)
+ width_mm = DRM_MODE_RES_MM(width, 96ul);
+ if (!height_mm)
+ height_mm = DRM_MODE_RES_MM(height, 96ul);
+
+ sdev->mode = simpledrm_mode(width, height, width_mm, height_mm);
sdev->format = format;
sdev->pitch = stride;
--
2.39.0
next prev parent reply other threads:[~2023-01-21 15:36 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-21 15:35 [PATCH v2 0/2] SimpleDRM: allow configuring physical width and height Rayyan Ansari
2023-01-21 15:35 ` Rayyan Ansari [this message]
2023-01-26 13:05 ` [PATCH v2 1/2] drm/simpledrm: Allow physical width and height configuration via DT Thomas Zimmermann
2023-01-21 15:35 ` [PATCH v2 2/2] dt-bindings: display: simple-framebuffer: Document physical width and height properties Rayyan Ansari
2023-01-22 15:31 ` Rob Herring
2023-01-22 17:28 ` Rayyan Ansari
2023-01-22 15:36 ` Rob Herring
2023-01-22 15:42 ` Hans de Goede
2023-01-22 17:25 ` Rayyan Ansari
2023-01-23 17:53 ` Rob Herring
2023-01-24 22:19 ` Rayyan Ansari
2023-01-24 22:40 ` Mark Kettenis
2023-01-25 7:28 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230121153544.467126-2-rayyan@ansari.sh \
--to=rayyan@ansari.sh \
--cc=airlied@gmail.com \
--cc=asahi@lists.linux.dev \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=hdegoede@redhat.com \
--cc=janne@jannau.net \
--cc=javierm@redhat.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=tzimmermann@suse.de \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).