Re: [PATCH v8 2/3] arm64: dts: imx8mm-evkb: add support for i.MX8MM-EVKB

[Marco Felsch <m.felsch@pengutronix.de>]

Hi Johannes,

On 23-01-23, Johannes Schneider wrote:
> Add devicetree for the EVKB, which comes with LPDDR4 and a different
> PMIC.
> 
> Signed-off-by: Johannes Schneider <johannes.schneider@leica-geosystems.com>
> ---
>  arch/arm64/boot/dts/freescale/Makefile        |   1 +
>  arch/arm64/boot/dts/freescale/imx8mm-evkb.dts | 116 ++++++++++++++++++
>  2 files changed, 117 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-evkb.dts
> 
> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> index 3ea9edc87909..3bccc4d10928 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -55,6 +55,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-data-modul-edm-sbc.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mm-ddr4-evk.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mm-emcon-avari.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb
> +dtb-$(CONFIG_ARCH_MXC) += imx8mm-evkb.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-ctouch2.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-edimm2.2.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-bl.dtb
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evkb.dts b/arch/arm64/boot/dts/freescale/imx8mm-evkb.dts
> new file mode 100644
> index 000000000000..b2d724ad43b2
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-evkb.dts
> @@ -0,0 +1,116 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright 2019-2020 NXP
> + */
> +
> +/dts-v1/;
> +
> +#include "imx8mm-evk.dtsi"
> +
> +/ {
> +	model = "FSL i.MX8MM EVKB"; // with LPDDR4 and PCA9450 PMIC
> +	compatible = "fsl,imx8mm-evkb", "fsl,imx8mm";
> +};
> +
> +&i2c1 {
> +	pmic: pmic@25 {
> +		compatible = "nxp,pca9450a";
> +		reg = <0x25>;
> +		pinctrl-0 = <&pinctrl_pmic>;
> +		pinctrl-names = "default";
> +		interrupt-parent = <&gpio1>;
> +		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
> +
> +		regulators {
> +			buck1_reg: BUCK1 {
> +				regulator-name = "BUCK1";
> +				regulator-min-microvolt = <600000>;
> +				regulator-max-microvolt = <2187500>;

please check the voltages for all regulators. You need to set the board
constrains here and not the regulator/PMIC ones.

Regards,
  Marco

> +				regulator-boot-on;
> +				regulator-always-on;
> +				regulator-ramp-delay = <3125>;
> +				nxp,dvs-run-voltage = <820000>;
> +				nxp,dvs-standby-voltage = <800000>;
> +			};
> +
> +			buck2_reg: BUCK2 {
> +				regulator-name = "BUCK2";
> +				regulator-min-microvolt = <600000>;
> +				regulator-max-microvolt = <2187500>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +				regulator-ramp-delay = <3125>;
> +			};
> +
> +			buck3_reg: BUCK3 {
> +				regulator-name = "BUCK3";
> +				regulator-min-microvolt = <600000>;
> +				regulator-max-microvolt = <2187500>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			buck4_reg: BUCK4 {
> +				regulator-name = "BUCK4";
> +				regulator-min-microvolt = <600000>;
> +				regulator-max-microvolt = <3400000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			buck5_reg: BUCK5 {
> +				regulator-name = "BUCK5";
> +				regulator-min-microvolt = <600000>;
> +				regulator-max-microvolt = <3400000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			buck6_reg: BUCK6 {
> +				regulator-name = "BUCK6";
> +				regulator-min-microvolt = <600000>;
> +				regulator-max-microvolt = <3400000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			ldo1_reg: LDO1 {
> +				regulator-name = "LDO1";
> +				regulator-min-microvolt = <1600000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			ldo2_reg: LDO2 {
> +				regulator-name = "LDO2";
> +				regulator-min-microvolt = <800000>;
> +				regulator-max-microvolt = <1150000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			ldo3_reg: LDO3 {
> +				regulator-name = "LDO3";
> +				regulator-min-microvolt = <800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			ldo4_reg: LDO4 {
> +				regulator-name = "LDO4";
> +				regulator-min-microvolt = <800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			ldo5_reg: LDO5 {
> +				regulator-name = "LDO5";
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3300000>;
> +			};
> +		};
> +	};
> +};
> -- 
> 2.25.1
> 
> 
>