From: Sinthu Raja <sinthu.raja@mistralsolutions.com>
To: Nishanth Menon <nm@ti.com>, Tero Kristo <kristo@kernel.org>,
Rob Herring <robh+dt@kernel.org>
Cc: Vignesh Raghavendra <vigneshr@ti.com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, Sinthu Raja <sinthu.raja@ti.com>
Subject: [PATCH] arm64: dts: ti: k3-j721s2-main: Add dts nodes for EHRPWMs
Date: Thu, 26 Jan 2023 18:52:43 +0530 [thread overview]
Message-ID: <20230126132243.15695-1-sinthu.raja@ti.com> (raw)
From: Sinthu Raja <sinthu.raja@ti.com>
Add dts nodes for 6 EHRPWM instances on SoC. Disable EHRPWM nodes in the
dtsi files and only enable the ones that are actually pinned out on a
given board.
Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
---
arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 74 ++++++++++++++++++++++
1 file changed, 74 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
index 8915132efcc1..68f4fe85085b 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
@@ -26,6 +26,80 @@ l3cache-sram@200000 {
};
};
+ scm_conf: scm-conf@104000 {
+ compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
+ reg = <0x00 0x00104000 0x00 0x18000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00 0x00 0x00104000 0x18000>;
+
+ ehrpwm_tbclk: clock-controller@140 {
+ compatible = "ti,am654-ehrpwm-tbclk", "syscon";
+ reg = <0x140 0x18>;
+ #clock-cells = <1>;
+ };
+ };
+
+ main_ehrpwm0: pwm@3000000 {
+ compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x00 0x3000000 0x00 0x100>;
+ power-domains = <&k3_pds 160 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&ehrpwm_tbclk 0>, <&k3_clks 160 0>;
+ clock-names = "tbclk", "fck";
+ status = "disabled";
+ };
+
+ main_ehrpwm1: pwm@3010000 {
+ compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x00 0x3010000 0x00 0x100>;
+ power-domains = <&k3_pds 161 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&ehrpwm_tbclk 1>, <&k3_clks 161 0>;
+ clock-names = "tbclk", "fck";
+ status = "disabled";
+ };
+
+ main_ehrpwm2: pwm@3020000 {
+ compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x00 0x3020000 0x00 0x100>;
+ power-domains = <&k3_pds 162 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&ehrpwm_tbclk 2>, <&k3_clks 162 0>;
+ clock-names = "tbclk", "fck";
+ status = "disabled";
+ };
+
+ main_ehrpwm3: pwm@3030000 {
+ compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x00 0x3030000 0x00 0x100>;
+ power-domains = <&k3_pds 163 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&ehrpwm_tbclk 3>, <&k3_clks 163 0>;
+ clock-names = "tbclk", "fck";
+ status = "disabled";
+ };
+
+ main_ehrpwm4: pwm@3040000 {
+ compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x00 0x3040000 0x00 0x100>;
+ power-domains = <&k3_pds 164 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&ehrpwm_tbclk 4>, <&k3_clks 164 0>;
+ clock-names = "tbclk", "fck";
+ status = "disabled";
+ };
+
+ main_ehrpwm5: pwm@3050000 {
+ compatible = "ti,am654-ehrpwm", "ti,am3352-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x00 0x3050000 0x00 0x100>;
+ power-domains = <&k3_pds 165 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&ehrpwm_tbclk 5>, <&k3_clks 165 0>;
+ clock-names = "tbclk", "fck";
+ status = "disabled";
+ };
+
gic500: interrupt-controller@1800000 {
compatible = "arm,gic-v3";
#address-cells = <2>;
--
2.36.1
next reply other threads:[~2023-01-26 13:23 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-26 13:22 Sinthu Raja [this message]
-- strict thread matches above, loose matches on Subject: below --
2023-07-13 11:40 [PATCH] arm64: dts: ti: k3-j721s2-main: Add dts nodes for EHRPWMs Sinthu Raja
2023-07-13 16:48 ` Nishanth Menon
2023-08-01 18:33 ` Nishanth Menon
2023-08-01 20:11 ` Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230126132243.15695-1-sinthu.raja@ti.com \
--to=sinthu.raja@mistralsolutions.com \
--cc=devicetree@vger.kernel.org \
--cc=kristo@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=robh+dt@kernel.org \
--cc=sinthu.raja@ti.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox