devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Johan Hovold <johan+linaro@kernel.org>
To: Alexandre Belloni <alexandre.belloni@bootlin.com>,
	Bjorn Andersson <andersson@kernel.org>
Cc: Andy Gross <agross@kernel.org>,
	Konrad Dybcio <konrad.dybcio@linaro.org>,
	Alessandro Zummo <a.zummo@towertech.it>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Maximilian Luz <luzmaximilian@gmail.com>,
	linux-arm-msm@vger.kernel.org, linux-rtc@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	Johan Hovold <johan+linaro@kernel.org>
Subject: [PATCH 13/24] rtc: pm8xxx: refactor read_time()
Date: Thu, 26 Jan 2023 15:20:46 +0100	[thread overview]
Message-ID: <20230126142057.25715-14-johan+linaro@kernel.org> (raw)
In-Reply-To: <20230126142057.25715-1-johan+linaro@kernel.org>

In preparation for adding support for setting the time by means of an
externally stored offset, refactor read_time() by adding a new helper
that can be used to retrieve the raw time as stored in the RTC.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
 drivers/rtc/rtc-pm8xxx.c | 54 ++++++++++++++++++++++++----------------
 1 file changed, 33 insertions(+), 21 deletions(-)

diff --git a/drivers/rtc/rtc-pm8xxx.c b/drivers/rtc/rtc-pm8xxx.c
index b1ce246c501a..2f96a178595c 100644
--- a/drivers/rtc/rtc-pm8xxx.c
+++ b/drivers/rtc/rtc-pm8xxx.c
@@ -59,6 +59,37 @@ struct pm8xxx_rtc {
 	struct device *dev;
 };
 
+static int pm8xxx_rtc_read_raw(struct pm8xxx_rtc *rtc_dd, u32 *secs)
+{
+	const struct pm8xxx_rtc_regs *regs = rtc_dd->regs;
+	u8 value[NUM_8_BIT_RTC_REGS];
+	unsigned int reg;
+	int rc;
+
+	rc = regmap_bulk_read(rtc_dd->regmap, regs->read, value, sizeof(value));
+	if (rc)
+		return rc;
+
+	/*
+	 * Read the LSB again and check if there has been a carry over.
+	 * If there has, redo the read operation.
+	 */
+	rc = regmap_read(rtc_dd->regmap, regs->read, &reg);
+	if (rc < 0)
+		return rc;
+
+	if (reg < value[0]) {
+		rc = regmap_bulk_read(rtc_dd->regmap, regs->read, value,
+				      sizeof(value));
+		if (rc)
+			return rc;
+	}
+
+	*secs = get_unaligned_le32(value);
+
+	return 0;
+}
+
 /*
  * Steps to write the RTC registers.
  * 1. Disable alarm if enabled.
@@ -129,33 +160,14 @@ static int pm8xxx_rtc_set_time(struct device *dev, struct rtc_time *tm)
 
 static int pm8xxx_rtc_read_time(struct device *dev, struct rtc_time *tm)
 {
-	int rc;
-	u8 value[NUM_8_BIT_RTC_REGS];
-	unsigned int reg;
 	struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
-	const struct pm8xxx_rtc_regs *regs = rtc_dd->regs;
 	u32 secs;
+	int rc;
 
-	rc = regmap_bulk_read(rtc_dd->regmap, regs->read, value, sizeof(value));
+	rc = pm8xxx_rtc_read_raw(rtc_dd, &secs);
 	if (rc)
 		return rc;
 
-	/*
-	 * Read the LSB again and check if there has been a carry over.
-	 * If there is, redo the read operation.
-	 */
-	rc = regmap_read(rtc_dd->regmap, regs->read, &reg);
-	if (rc < 0)
-		return rc;
-
-	if (unlikely(reg < value[0])) {
-		rc = regmap_bulk_read(rtc_dd->regmap, regs->read,
-				      value, sizeof(value));
-		if (rc)
-			return rc;
-	}
-
-	secs = get_unaligned_le32(value);
 	rtc_time64_to_tm(secs, tm);
 
 	dev_dbg(dev, "read time: %ptRd %ptRt (%u)\n", tm, tm, secs);
-- 
2.39.1


  parent reply	other threads:[~2023-01-26 14:23 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-01-26 14:20 [PATCH 00/24] rtc: pm8xxx: add support for setting time using nvmem Johan Hovold
2023-01-26 14:20 ` [PATCH 01/24] rtc: pm8xxx: fix set-alarm race Johan Hovold
2023-01-26 14:20 ` [PATCH 02/24] rtc: pm8xxx: drop spmi error messages Johan Hovold
2023-01-26 14:20 ` [PATCH 03/24] rtc: pm8xxx: use regmap_update_bits() Johan Hovold
2023-01-26 14:20 ` [PATCH 04/24] rtc: pm8xxx: drop bogus locking Johan Hovold
2023-01-26 14:20 ` [PATCH 05/24] rtc: pm8xxx: return IRQ_NONE on errors Johan Hovold
2023-01-26 14:20 ` [PATCH 06/24] rtc: pm8xxx: drop unused register defines Johan Hovold
2023-01-26 14:20 ` [PATCH 07/24] rtc: pm8xxx: use unaligned le32 helpers Johan Hovold
2023-01-26 14:20 ` [PATCH 08/24] rtc: pm8xxx: clean up time and alarm debugging Johan Hovold
2023-01-26 14:20 ` [PATCH 09/24] rtc: pm8xxx: rename struct device pointer Johan Hovold
2023-01-26 14:20 ` [PATCH 10/24] rtc: pm8xxx: rename alarm irq variable Johan Hovold
2023-01-26 14:20 ` [PATCH 11/24] rtc: pm8xxx: clean up comments Johan Hovold
2023-01-26 14:20 ` [PATCH 12/24] rtc: pm8xxx: use u32 for timestamps Johan Hovold
2023-01-26 14:20 ` Johan Hovold [this message]
2023-01-26 14:20 ` [PATCH 14/24] rtc: pm8xxx: clean up local declarations Johan Hovold
2023-01-26 14:20 ` [PATCH 15/24] dt-bindings: rtc: qcom-pm8xxx: add nvmem-cell offset Johan Hovold
2023-01-26 15:56   ` Krzysztof Kozlowski
2023-01-26 14:20 ` [PATCH 16/24] rtc: pm8xxx: add support for nvmem offset Johan Hovold
2023-01-27 14:13   ` Srinivas Kandagatla
2023-01-27 15:32     ` Johan Hovold
2023-01-27 15:09   ` Alexandre Belloni
2023-01-27 15:51     ` Johan Hovold
2023-01-27 16:05       ` Alexandre Belloni
2023-02-02 15:12         ` Johan Hovold
2023-02-02 15:21           ` Alexandre Belloni
2023-01-26 14:20 ` [PATCH 17/24] rtc: pm8xxx: add copyright notice Johan Hovold
2023-01-26 16:06   ` Alexandre Belloni
2023-01-27 13:04     ` Johan Hovold
2023-01-27 14:14       ` Krzysztof Kozlowski
2023-02-02 10:22         ` Johan Hovold
2023-01-26 14:20 ` [RFC 18/24] dt-bindings: rtc: qcom-pm8xxx: add uefi-variable offset Johan Hovold
2023-01-30 18:49   ` Rob Herring
2023-02-01 16:09     ` Johan Hovold
2023-02-09 16:59       ` Ard Biesheuvel
2023-01-26 14:20 ` [PATCH 19/24] rtc: pm8xxx: add support for uefi offset Johan Hovold
2023-01-26 14:27   ` Johan Hovold
2023-01-27 15:19   ` Alexandre Belloni
2023-01-27 15:26     ` Johan Hovold
2023-01-27 15:59       ` Alexandre Belloni
2023-01-26 14:20 ` [PATCH 20/24] arm64: defconfig: enable Qualcomm SDAM nvmem driver Johan Hovold
2023-01-26 14:20 ` [PATCH 21/24] arm64: dts: qcom: sc8280xp-pmics: add pmk8280 rtc Johan Hovold
2023-01-26 14:20 ` [PATCH 22/24] arm64: dts: qcom: sc8280xp-pmics: add pmk8280 sdam nvram Johan Hovold
2023-01-26 14:20 ` [PATCH 23/24] arm64: dts: qcom: sc8280xp-crd: enable rtc Johan Hovold
2023-01-26 14:20 ` [PATCH 24/24] arm64: dts: qcom: sc8280xp-x13s: " Johan Hovold

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230126142057.25715-14-johan+linaro@kernel.org \
    --to=johan+linaro@kernel.org \
    --cc=a.zummo@towertech.it \
    --cc=agross@kernel.org \
    --cc=alexandre.belloni@bootlin.com \
    --cc=andersson@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=konrad.dybcio@linaro.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rtc@vger.kernel.org \
    --cc=luzmaximilian@gmail.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).