From: Johan Hovold <johan+linaro@kernel.org>
To: Alexandre Belloni <alexandre.belloni@bootlin.com>,
Bjorn Andersson <andersson@kernel.org>
Cc: Andy Gross <agross@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Alessandro Zummo <a.zummo@towertech.it>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Maximilian Luz <luzmaximilian@gmail.com>,
linux-arm-msm@vger.kernel.org, linux-rtc@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Johan Hovold <johan+linaro@kernel.org>
Subject: [PATCH 02/24] rtc: pm8xxx: drop spmi error messages
Date: Thu, 26 Jan 2023 15:20:35 +0100 [thread overview]
Message-ID: <20230126142057.25715-3-johan+linaro@kernel.org> (raw)
In-Reply-To: <20230126142057.25715-1-johan+linaro@kernel.org>
Drop the unnecessary error messages after every spmi regmap access,
which are not expected to fail.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/rtc/rtc-pm8xxx.c | 71 ++++++++++------------------------------
1 file changed, 17 insertions(+), 54 deletions(-)
diff --git a/drivers/rtc/rtc-pm8xxx.c b/drivers/rtc/rtc-pm8xxx.c
index d114f0da537d..f49bda999e02 100644
--- a/drivers/rtc/rtc-pm8xxx.c
+++ b/drivers/rtc/rtc-pm8xxx.c
@@ -105,10 +105,8 @@ static int pm8xxx_rtc_set_time(struct device *dev, struct rtc_time *tm)
alarm_enabled = 1;
ctrl_reg &= ~regs->alarm_en;
rc = regmap_write(rtc_dd->regmap, regs->alarm_ctrl, ctrl_reg);
- if (rc) {
- dev_err(dev, "Write to RTC Alarm control register failed\n");
+ if (rc)
goto rtc_rw_fail;
- }
}
/* Disable RTC H/w before writing on RTC register */
@@ -120,51 +118,39 @@ static int pm8xxx_rtc_set_time(struct device *dev, struct rtc_time *tm)
rtc_disabled = 1;
rtc_ctrl_reg &= ~PM8xxx_RTC_ENABLE;
rc = regmap_write(rtc_dd->regmap, regs->ctrl, rtc_ctrl_reg);
- if (rc) {
- dev_err(dev, "Write to RTC control register failed\n");
+ if (rc)
goto rtc_rw_fail;
- }
}
/* Write 0 to Byte[0] */
rc = regmap_write(rtc_dd->regmap, regs->write, 0);
- if (rc) {
- dev_err(dev, "Write to RTC write data register failed\n");
+ if (rc)
goto rtc_rw_fail;
- }
/* Write Byte[1], Byte[2], Byte[3] */
rc = regmap_bulk_write(rtc_dd->regmap, regs->write + 1,
&value[1], sizeof(value) - 1);
- if (rc) {
- dev_err(dev, "Write to RTC write data register failed\n");
+ if (rc)
goto rtc_rw_fail;
- }
/* Write Byte[0] */
rc = regmap_write(rtc_dd->regmap, regs->write, value[0]);
- if (rc) {
- dev_err(dev, "Write to RTC write data register failed\n");
+ if (rc)
goto rtc_rw_fail;
- }
/* Enable RTC H/w after writing on RTC register */
if (rtc_disabled) {
rtc_ctrl_reg |= PM8xxx_RTC_ENABLE;
rc = regmap_write(rtc_dd->regmap, regs->ctrl, rtc_ctrl_reg);
- if (rc) {
- dev_err(dev, "Write to RTC control register failed\n");
+ if (rc)
goto rtc_rw_fail;
- }
}
if (alarm_enabled) {
ctrl_reg |= regs->alarm_en;
rc = regmap_write(rtc_dd->regmap, regs->alarm_ctrl, ctrl_reg);
- if (rc) {
- dev_err(dev, "Write to RTC Alarm control register failed\n");
+ if (rc)
goto rtc_rw_fail;
- }
}
rtc_rw_fail:
@@ -183,28 +169,22 @@ static int pm8xxx_rtc_read_time(struct device *dev, struct rtc_time *tm)
const struct pm8xxx_rtc_regs *regs = rtc_dd->regs;
rc = regmap_bulk_read(rtc_dd->regmap, regs->read, value, sizeof(value));
- if (rc) {
- dev_err(dev, "RTC read data register failed\n");
+ if (rc)
return rc;
- }
/*
* Read the LSB again and check if there has been a carry over.
* If there is, redo the read operation.
*/
rc = regmap_read(rtc_dd->regmap, regs->read, ®);
- if (rc < 0) {
- dev_err(dev, "RTC read data register failed\n");
+ if (rc < 0)
return rc;
- }
if (unlikely(reg < value[0])) {
rc = regmap_bulk_read(rtc_dd->regmap, regs->read,
value, sizeof(value));
- if (rc) {
- dev_err(dev, "RTC read data register failed\n");
+ if (rc)
return rc;
- }
}
secs = value[0] | (value[1] << 8) | (value[2] << 16) |
@@ -241,10 +221,8 @@ static int pm8xxx_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
rc = regmap_bulk_write(rtc_dd->regmap, regs->alarm_rw, value,
sizeof(value));
- if (rc) {
- dev_err(dev, "Write to RTC ALARM register failed\n");
+ if (rc)
goto rtc_rw_fail;
- }
if (alarm->enabled) {
rc = regmap_update_bits(rtc_dd->regmap, regs->alarm_ctrl,
@@ -271,10 +249,8 @@ static int pm8xxx_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
rc = regmap_bulk_read(rtc_dd->regmap, regs->alarm_rw, value,
sizeof(value));
- if (rc) {
- dev_err(dev, "RTC alarm time read failed\n");
+ if (rc)
return rc;
- }
secs = value[0] | (value[1] << 8) | (value[2] << 16) |
((unsigned long)value[3] << 24);
@@ -282,10 +258,9 @@ static int pm8xxx_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
rtc_time64_to_tm(secs, &alarm->time);
rc = regmap_read(rtc_dd->regmap, regs->alarm_ctrl, &ctrl_reg);
- if (rc) {
- dev_err(dev, "Read from RTC alarm control register failed\n");
+ if (rc)
return rc;
- }
+
alarm->enabled = !!(ctrl_reg & PM8xxx_RTC_ALARM_ENABLE);
dev_dbg(dev, "Alarm set for - h:m:s=%ptRt, y-m-d=%ptRdr\n",
@@ -315,19 +290,15 @@ static int pm8xxx_rtc_alarm_irq_enable(struct device *dev, unsigned int enable)
ctrl_reg &= ~regs->alarm_en;
rc = regmap_write(rtc_dd->regmap, regs->alarm_ctrl, ctrl_reg);
- if (rc) {
- dev_err(dev, "Write to RTC control register failed\n");
+ if (rc)
goto rtc_rw_fail;
- }
/* Clear Alarm register */
if (!enable) {
rc = regmap_bulk_write(rtc_dd->regmap, regs->alarm_rw, value,
sizeof(value));
- if (rc) {
- dev_err(dev, "Clear RTC ALARM register failed\n");
+ if (rc)
goto rtc_rw_fail;
- }
}
rtc_rw_fail:
@@ -366,8 +337,6 @@ static irqreturn_t pm8xxx_alarm_trigger(int irq, void *dev_id)
rc = regmap_write(rtc_dd->regmap, regs->alarm_ctrl, ctrl_reg);
if (rc) {
spin_unlock(&rtc_dd->ctrl_reg_lock);
- dev_err(rtc_dd->rtc_dev,
- "Write to alarm control register failed\n");
goto rtc_alarm_handled;
}
@@ -375,17 +344,11 @@ static irqreturn_t pm8xxx_alarm_trigger(int irq, void *dev_id)
/* Clear RTC alarm register */
rc = regmap_read(rtc_dd->regmap, regs->alarm_ctrl2, &ctrl_reg);
- if (rc) {
- dev_err(rtc_dd->rtc_dev,
- "RTC Alarm control2 register read failed\n");
+ if (rc)
goto rtc_alarm_handled;
- }
ctrl_reg |= PM8xxx_RTC_ALARM_CLEAR;
rc = regmap_write(rtc_dd->regmap, regs->alarm_ctrl2, ctrl_reg);
- if (rc)
- dev_err(rtc_dd->rtc_dev,
- "Write to RTC Alarm control2 register failed\n");
rtc_alarm_handled:
return IRQ_HANDLED;
--
2.39.1
next prev parent reply other threads:[~2023-01-26 14:23 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-26 14:20 [PATCH 00/24] rtc: pm8xxx: add support for setting time using nvmem Johan Hovold
2023-01-26 14:20 ` [PATCH 01/24] rtc: pm8xxx: fix set-alarm race Johan Hovold
2023-01-26 14:20 ` Johan Hovold [this message]
2023-01-26 14:20 ` [PATCH 03/24] rtc: pm8xxx: use regmap_update_bits() Johan Hovold
2023-01-26 14:20 ` [PATCH 04/24] rtc: pm8xxx: drop bogus locking Johan Hovold
2023-01-26 14:20 ` [PATCH 05/24] rtc: pm8xxx: return IRQ_NONE on errors Johan Hovold
2023-01-26 14:20 ` [PATCH 06/24] rtc: pm8xxx: drop unused register defines Johan Hovold
2023-01-26 14:20 ` [PATCH 07/24] rtc: pm8xxx: use unaligned le32 helpers Johan Hovold
2023-01-26 14:20 ` [PATCH 08/24] rtc: pm8xxx: clean up time and alarm debugging Johan Hovold
2023-01-26 14:20 ` [PATCH 09/24] rtc: pm8xxx: rename struct device pointer Johan Hovold
2023-01-26 14:20 ` [PATCH 10/24] rtc: pm8xxx: rename alarm irq variable Johan Hovold
2023-01-26 14:20 ` [PATCH 11/24] rtc: pm8xxx: clean up comments Johan Hovold
2023-01-26 14:20 ` [PATCH 12/24] rtc: pm8xxx: use u32 for timestamps Johan Hovold
2023-01-26 14:20 ` [PATCH 13/24] rtc: pm8xxx: refactor read_time() Johan Hovold
2023-01-26 14:20 ` [PATCH 14/24] rtc: pm8xxx: clean up local declarations Johan Hovold
2023-01-26 14:20 ` [PATCH 15/24] dt-bindings: rtc: qcom-pm8xxx: add nvmem-cell offset Johan Hovold
2023-01-26 15:56 ` Krzysztof Kozlowski
2023-01-26 14:20 ` [PATCH 16/24] rtc: pm8xxx: add support for nvmem offset Johan Hovold
2023-01-27 14:13 ` Srinivas Kandagatla
2023-01-27 15:32 ` Johan Hovold
2023-01-27 15:09 ` Alexandre Belloni
2023-01-27 15:51 ` Johan Hovold
2023-01-27 16:05 ` Alexandre Belloni
2023-02-02 15:12 ` Johan Hovold
2023-02-02 15:21 ` Alexandre Belloni
2023-01-26 14:20 ` [PATCH 17/24] rtc: pm8xxx: add copyright notice Johan Hovold
2023-01-26 16:06 ` Alexandre Belloni
2023-01-27 13:04 ` Johan Hovold
2023-01-27 14:14 ` Krzysztof Kozlowski
2023-02-02 10:22 ` Johan Hovold
2023-01-26 14:20 ` [RFC 18/24] dt-bindings: rtc: qcom-pm8xxx: add uefi-variable offset Johan Hovold
2023-01-30 18:49 ` Rob Herring
2023-02-01 16:09 ` Johan Hovold
2023-02-09 16:59 ` Ard Biesheuvel
2023-01-26 14:20 ` [PATCH 19/24] rtc: pm8xxx: add support for uefi offset Johan Hovold
2023-01-26 14:27 ` Johan Hovold
2023-01-27 15:19 ` Alexandre Belloni
2023-01-27 15:26 ` Johan Hovold
2023-01-27 15:59 ` Alexandre Belloni
2023-01-26 14:20 ` [PATCH 20/24] arm64: defconfig: enable Qualcomm SDAM nvmem driver Johan Hovold
2023-01-26 14:20 ` [PATCH 21/24] arm64: dts: qcom: sc8280xp-pmics: add pmk8280 rtc Johan Hovold
2023-01-26 14:20 ` [PATCH 22/24] arm64: dts: qcom: sc8280xp-pmics: add pmk8280 sdam nvram Johan Hovold
2023-01-26 14:20 ` [PATCH 23/24] arm64: dts: qcom: sc8280xp-crd: enable rtc Johan Hovold
2023-01-26 14:20 ` [PATCH 24/24] arm64: dts: qcom: sc8280xp-x13s: " Johan Hovold
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230126142057.25715-3-johan+linaro@kernel.org \
--to=johan+linaro@kernel.org \
--cc=a.zummo@towertech.it \
--cc=agross@kernel.org \
--cc=alexandre.belloni@bootlin.com \
--cc=andersson@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rtc@vger.kernel.org \
--cc=luzmaximilian@gmail.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).