From: Chris Morgan <macroalpha82@gmail.com>
To: linux-bluetooth@vger.kernel.org
Cc: devicetree@vger.kernel.org, alistair@alistair23.me,
anarsoul@gmail.com, krzysztof.kozlowski+dt@linaro.org,
robh+dt@kernel.org, marcel@holtmann.org, johan.hedberg@gmail.com,
luiz.dentz@gmail.com, max.chou@realtek.com, hildawu@realtek.com,
Chris Morgan <macromorgan@hotmail.com>
Subject: [PATCH RFC 2/2] Bluetooth: hci_h5: btrtl: Add support for RTL8821CS
Date: Thu, 26 Jan 2023 10:55:29 -0600 [thread overview]
Message-ID: <20230126165529.1452252-3-macroalpha82@gmail.com> (raw)
In-Reply-To: <20230126165529.1452252-1-macroalpha82@gmail.com>
From: Chris Morgan <macromorgan@hotmail.com>
RTL8821CS is a WiFi + Bluetooth combo chip from Realtek that provides
WiFi A/B/G/N/AC over an SDIO interface and Bluetooth 4.2 over a UART
interface.
Note that the firmware this was tested with was firmware version
0xaa9a4e68 as reported by the driver. Attempts at using other
firmware were unsucessful.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
drivers/bluetooth/btrtl.c | 8 ++++++++
drivers/bluetooth/hci_h5.c | 2 ++
2 files changed, 10 insertions(+)
diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
index 69c3fe649ca7..c95e55d8d696 100644
--- a/drivers/bluetooth/btrtl.c
+++ b/drivers/bluetooth/btrtl.c
@@ -128,6 +128,14 @@ static const struct id_table ic_id_table[] = {
.fw_name = "rtl_bt/rtl8821c_fw.bin",
.cfg_name = "rtl_bt/rtl8821c_config" },
+ /* 8821CS */
+ { IC_INFO(RTL_ROM_LMP_8821A, 0xc, 0x8, HCI_UART),
+ .config_needed = true,
+ .has_rom_version = true,
+ .has_msft_ext = true,
+ .fw_name = "rtl_bt/rtl8821cs_fw.bin",
+ .cfg_name = "rtl_bt/rtl8821cs_config" },
+
/* 8761A */
{ IC_INFO(RTL_ROM_LMP_8761A, 0xa, 0x6, HCI_USB),
.config_needed = false,
diff --git a/drivers/bluetooth/hci_h5.c b/drivers/bluetooth/hci_h5.c
index 6455bc4fb5bb..9531f092a71a 100644
--- a/drivers/bluetooth/hci_h5.c
+++ b/drivers/bluetooth/hci_h5.c
@@ -1096,6 +1096,8 @@ static const struct dev_pm_ops h5_serdev_pm_ops = {
static const struct of_device_id rtl_bluetooth_of_match[] = {
#ifdef CONFIG_BT_HCIUART_RTL
+ { .compatible = "realtek,rtl8821cs-bt",
+ .data = (const void *)&h5_data_rtl8822cs },
{ .compatible = "realtek,rtl8822cs-bt",
.data = (const void *)&h5_data_rtl8822cs },
{ .compatible = "realtek,rtl8723bs-bt",
--
2.34.1
prev parent reply other threads:[~2023-01-26 16:55 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-26 16:55 [PATCH RFC 0/2] Bluetooth: Add support for RTL8821CS Chris Morgan
2023-01-26 16:55 ` [PATCH RFC 1/2] dt-bindings: net: realtek-bluetooth: Add RTL8821CS Chris Morgan
2023-01-27 10:24 ` Krzysztof Kozlowski
2023-01-27 16:46 ` Chris Morgan
2023-01-27 16:53 ` Krzysztof Kozlowski
2023-01-27 17:00 ` Chris Morgan
2023-01-27 17:02 ` Krzysztof Kozlowski
2023-01-26 16:55 ` Chris Morgan [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230126165529.1452252-3-macroalpha82@gmail.com \
--to=macroalpha82@gmail.com \
--cc=alistair@alistair23.me \
--cc=anarsoul@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=hildawu@realtek.com \
--cc=johan.hedberg@gmail.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-bluetooth@vger.kernel.org \
--cc=luiz.dentz@gmail.com \
--cc=macromorgan@hotmail.com \
--cc=marcel@holtmann.org \
--cc=max.chou@realtek.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).