From: Colin Foster <colin.foster@in-advantage.com>
To: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org
Cc: Russell King <linux@armlinux.org.uk>,
Richard Cochran <richardcochran@gmail.com>,
Florian Fainelli <f.fainelli@gmail.com>,
Andrew Lunn <andrew@lunn.ch>,
UNGLinuxDriver@microchip.com,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
Claudiu Manoil <claudiu.manoil@nxp.com>,
Vladimir Oltean <vladimir.oltean@nxp.com>,
Paolo Abeni <pabeni@redhat.com>, Jakub Kicinski <kuba@kernel.org>,
Eric Dumazet <edumazet@google.com>,
"David S. Miller" <davem@davemloft.net>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Rob Herring <robh+dt@kernel.org>, Lee Jones <lee@kernel.org>
Subject: [PATCH v5 net-next 04/13] net: mscc: ocelot: expose ocelot_reset routine
Date: Fri, 27 Jan 2023 11:35:50 -0800 [thread overview]
Message-ID: <20230127193559.1001051-5-colin.foster@in-advantage.com> (raw)
In-Reply-To: <20230127193559.1001051-1-colin.foster@in-advantage.com>
Resetting the switch core is the same whether it is done internally or
externally. Move this routine to the ocelot library so it can be used by
other drivers.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
---
v3-v5
* No changes
v2
* New patch
---
drivers/net/ethernet/mscc/ocelot.c | 48 +++++++++++++++++++++-
drivers/net/ethernet/mscc/ocelot_vsc7514.c | 44 +-------------------
include/soc/mscc/ocelot.h | 1 +
3 files changed, 48 insertions(+), 45 deletions(-)
diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c
index c060b03f7e27..08acb7b89086 100644
--- a/drivers/net/ethernet/mscc/ocelot.c
+++ b/drivers/net/ethernet/mscc/ocelot.c
@@ -6,12 +6,16 @@
*/
#include <linux/dsa/ocelot.h>
#include <linux/if_bridge.h>
+#include <linux/iopoll.h>
#include <soc/mscc/ocelot_vcap.h>
#include "ocelot.h"
#include "ocelot_vcap.h"
-#define TABLE_UPDATE_SLEEP_US 10
-#define TABLE_UPDATE_TIMEOUT_US 100000
+#define TABLE_UPDATE_SLEEP_US 10
+#define TABLE_UPDATE_TIMEOUT_US 100000
+#define MEM_INIT_SLEEP_US 1000
+#define MEM_INIT_TIMEOUT_US 100000
+
#define OCELOT_RSV_VLAN_RANGE_START 4000
struct ocelot_mact_entry {
@@ -2713,6 +2717,46 @@ static void ocelot_detect_features(struct ocelot *ocelot)
ocelot->num_frame_refs = QSYS_MMGT_EQ_CTRL_FP_FREE_CNT(eq_ctrl);
}
+static int ocelot_mem_init_status(struct ocelot *ocelot)
+{
+ unsigned int val;
+ int err;
+
+ err = regmap_field_read(ocelot->regfields[SYS_RESET_CFG_MEM_INIT],
+ &val);
+
+ return err ?: val;
+}
+
+int ocelot_reset(struct ocelot *ocelot)
+{
+ int err;
+ u32 val;
+
+ err = regmap_field_write(ocelot->regfields[SYS_RESET_CFG_MEM_INIT], 1);
+ if (err)
+ return err;
+
+ err = regmap_field_write(ocelot->regfields[SYS_RESET_CFG_MEM_ENA], 1);
+ if (err)
+ return err;
+
+ /* MEM_INIT is a self-clearing bit. Wait for it to be cleared (should be
+ * 100us) before enabling the switch core.
+ */
+ err = readx_poll_timeout(ocelot_mem_init_status, ocelot, val, !val,
+ MEM_INIT_SLEEP_US, MEM_INIT_TIMEOUT_US);
+ if (err)
+ return err;
+
+ err = regmap_field_write(ocelot->regfields[SYS_RESET_CFG_MEM_ENA], 1);
+ if (err)
+ return err;
+
+ return regmap_field_write(ocelot->regfields[SYS_RESET_CFG_CORE_ENA], 1);
+}
+EXPORT_SYMBOL(ocelot_reset);
+
int ocelot_init(struct ocelot *ocelot)
{
int i, ret;
diff --git a/drivers/net/ethernet/mscc/ocelot_vsc7514.c b/drivers/net/ethernet/mscc/ocelot_vsc7514.c
index 381d099f41b1..1e94108ab8bc 100644
--- a/drivers/net/ethernet/mscc/ocelot_vsc7514.c
+++ b/drivers/net/ethernet/mscc/ocelot_vsc7514.c
@@ -6,7 +6,6 @@
*/
#include <linux/dsa/ocelot.h>
#include <linux/interrupt.h>
-#include <linux/iopoll.h>
#include <linux/module.h>
#include <linux/of_net.h>
#include <linux/netdevice.h>
@@ -17,6 +16,7 @@
#include <linux/skbuff.h>
#include <net/switchdev.h>
+#include <soc/mscc/ocelot.h>
#include <soc/mscc/ocelot_vcap.h>
#include <soc/mscc/ocelot_hsio.h>
#include <soc/mscc/vsc7514_regs.h>
@@ -26,9 +26,6 @@
#define VSC7514_VCAP_POLICER_BASE 128
#define VSC7514_VCAP_POLICER_MAX 191
-#define MEM_INIT_SLEEP_US 1000
-#define MEM_INIT_TIMEOUT_US 100000
-
static const u32 *ocelot_regmap[TARGET_MAX] = {
[ANA] = vsc7514_ana_regmap,
[QS] = vsc7514_qs_regmap,
@@ -132,45 +129,6 @@ static const struct of_device_id mscc_ocelot_match[] = {
};
MODULE_DEVICE_TABLE(of, mscc_ocelot_match);
-static int ocelot_mem_init_status(struct ocelot *ocelot)
-{
- unsigned int val;
- int err;
-
- err = regmap_field_read(ocelot->regfields[SYS_RESET_CFG_MEM_INIT],
- &val);
-
- return err ?: val;
-}
-
-static int ocelot_reset(struct ocelot *ocelot)
-{
- int err;
- u32 val;
-
- err = regmap_field_write(ocelot->regfields[SYS_RESET_CFG_MEM_INIT], 1);
- if (err)
- return err;
-
- err = regmap_field_write(ocelot->regfields[SYS_RESET_CFG_MEM_ENA], 1);
- if (err)
- return err;
-
- /* MEM_INIT is a self-clearing bit. Wait for it to be cleared (should be
- * 100us) before enabling the switch core.
- */
- err = readx_poll_timeout(ocelot_mem_init_status, ocelot, val, !val,
- MEM_INIT_SLEEP_US, MEM_INIT_TIMEOUT_US);
- if (err)
- return err;
-
- err = regmap_field_write(ocelot->regfields[SYS_RESET_CFG_MEM_ENA], 1);
- if (err)
- return err;
-
- return regmap_field_write(ocelot->regfields[SYS_RESET_CFG_CORE_ENA], 1);
-}
-
static const struct ocelot_ops ocelot_ops = {
.reset = ocelot_reset,
.wm_enc = ocelot_wm_enc,
diff --git a/include/soc/mscc/ocelot.h b/include/soc/mscc/ocelot.h
index 0edb16b6087f..2080879e4134 100644
--- a/include/soc/mscc/ocelot.h
+++ b/include/soc/mscc/ocelot.h
@@ -967,6 +967,7 @@ void ocelot_ptp_rx_timestamp(struct ocelot *ocelot, struct sk_buff *skb,
int ocelot_regfields_init(struct ocelot *ocelot,
const struct reg_field *const regfields);
struct regmap *ocelot_regmap_init(struct ocelot *ocelot, struct resource *res);
+int ocelot_reset(struct ocelot *ocelot);
int ocelot_init(struct ocelot *ocelot);
void ocelot_deinit(struct ocelot *ocelot);
void ocelot_init_port(struct ocelot *ocelot, int port);
--
2.25.1
next prev parent reply other threads:[~2023-01-27 19:36 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-27 19:35 [PATCH v5 net-next 00/13] add support for the the vsc7512 internal copper phys Colin Foster
2023-01-27 19:35 ` [PATCH v5 net-next 01/13] net: mscc: ocelot: expose ocelot wm functions Colin Foster
2023-01-27 19:37 ` Florian Fainelli
2023-01-27 19:35 ` [PATCH v5 net-next 02/13] net: mscc: ocelot: expose regfield definition to be used by other drivers Colin Foster
2023-01-27 19:38 ` Florian Fainelli
2023-01-27 19:35 ` [PATCH v5 net-next 03/13] net: mscc: ocelot: expose vcap_props structure Colin Foster
2023-01-27 19:38 ` Florian Fainelli
2023-01-27 19:35 ` Colin Foster [this message]
2023-01-27 19:38 ` [PATCH v5 net-next 04/13] net: mscc: ocelot: expose ocelot_reset routine Florian Fainelli
2023-01-27 19:35 ` [PATCH v5 net-next 05/13] net: mscc: ocelot: expose vsc7514_regmap definition Colin Foster
2023-01-27 19:39 ` Florian Fainelli
2023-01-27 19:35 ` [PATCH v5 net-next 06/13] net: dsa: felix: add configurable device quirks Colin Foster
2023-01-27 19:39 ` Florian Fainelli
2023-01-27 19:35 ` [PATCH v5 net-next 07/13] net: dsa: felix: add support for MFD configurations Colin Foster
2023-01-27 19:40 ` Florian Fainelli
2023-01-27 19:35 ` [PATCH v5 net-next 08/13] net: dsa: felix: add functionality when not all ports are supported Colin Foster
2023-01-27 19:41 ` Florian Fainelli
2023-01-27 19:35 ` [PATCH v5 net-next 09/13] mfd: ocelot: prepend resource size macros to be 32-bit Colin Foster
2023-01-27 19:41 ` Florian Fainelli
2023-01-27 19:35 ` [PATCH v5 net-next 10/13] dt-bindings: net: mscc,vsc7514-switch: add dsa binding for the vsc7512 Colin Foster
2023-01-30 21:10 ` Rob Herring
2023-01-27 19:35 ` [PATCH v5 net-next 11/13] dt-bindings: mfd: ocelot: add ethernet-switch hardware support Colin Foster
2023-01-30 21:10 ` Rob Herring
2023-01-27 19:35 ` [PATCH v5 net-next 12/13] net: dsa: ocelot: add external ocelot switch control Colin Foster
2023-01-27 19:53 ` Florian Fainelli
2023-01-27 19:35 ` [PATCH v5 net-next 13/13] mfd: " Colin Foster
2023-01-27 19:53 ` Florian Fainelli
2023-01-27 20:15 ` Colin Foster
2023-01-30 15:31 ` [PATCH v5 net-next 00/13] add support for the the vsc7512 internal copper phys Vladimir Oltean
2023-01-31 5:20 ` patchwork-bot+netdevbpf
2023-01-31 9:06 ` Lee Jones
2023-01-31 19:45 ` Jakub Kicinski
2023-01-31 19:55 ` Colin Foster
2023-02-01 10:15 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230127193559.1001051-5-colin.foster@in-advantage.com \
--to=colin.foster@in-advantage.com \
--cc=UNGLinuxDriver@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=andrew@lunn.ch \
--cc=claudiu.manoil@nxp.com \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=f.fainelli@gmail.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=kuba@kernel.org \
--cc=lee@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=richardcochran@gmail.com \
--cc=robh+dt@kernel.org \
--cc=vladimir.oltean@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).