Re: [PATCH v3 1/8] dt-bindings: phy: Add qcom,snps-eusb2-phy schema file

[Rob Herring <robh@kernel.org>]

On Thu, Jan 26, 2023 at 03:14:08PM +0200, Abel Vesa wrote:
> The SM8550 SoC uses Synopsis eUSB2 PHY. Add a dt-binding schema
> for the new driver.
> 
> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> ---
> 
> The v2 version of this patch was here:
> https://lore.kernel.org/all/20230126124651.1362533-2-abel.vesa@linaro.org/
> 
> Changes since v2:
>  * none
> 
> Changes since v1:
>  * dropped the "ref src" clock
>  * dropped the usb-repeater property
> 
>  .../bindings/phy/qcom,snps-eusb2-phy.yaml     | 78 +++++++++++++++++++
>  1 file changed, 78 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/qcom,snps-eusb2-phy.yaml
> 
> diff --git a/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-phy.yaml
> new file mode 100644
> index 000000000000..49a5dad486c2
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-phy.yaml
> @@ -0,0 +1,78 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +

Remove blank line

> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/phy/qcom,snps-eusb2-phy.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"

Drop quotes

> +
> +title: Qualcomm SNPS eUSB2 phy controller
> +
> +maintainers:
> +  - Abel Vesa <abel.vesa@linaro.org>
> +
> +description:
> +  eUSB2 controller supports LS/FS/HS usb connectivity on Qualcomm chipsets.
> +
> +properties:
> +  compatible:
> +    const: qcom,sm8550-snps-eusb2-phy
> +
> +  reg:
> +    maxItems: 1
> +
> +  "#phy-cells":
> +    const: 0
> +
> +  clocks:
> +    items:
> +      - description: ref
> +
> +  clock-names:
> +    items:
> +      - const: ref
> +
> +  resets:
> +    maxItems: 1
> +    description:
> +      Phandle to reset to phy block.

Drop description.

> +
> +  vdd-supply:
> +    description:
> +      Phandle to 0.88V regulator supply to PHY digital circuit.
> +
> +  vdda12-supply:
> +    description:
> +      Phandle to 1.2V regulator supply to PHY refclk pll block.
> +
> +required:
> +  - compatible
> +  - reg
> +  - "#phy-cells"
> +  - clocks
> +  - clock-names
> +  - vdd-supply
> +  - vdda12-supply
> +  - resets
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/qcom,gcc-sm8550.h>
> +    #include <dt-bindings/clock/qcom,rpmh.h>
> +    #include <dt-bindings/clock/qcom,tcsrcc-sm8550.h>
> +
> +    usb_1_hsphy: phy@88e3000 {
> +        compatible = "qcom,sm8550-snps-eusb2-phy";
> +        reg = <0x88e3000 0x154>;
> +        #phy-cells = <0>;
> +
> +        clocks = <&rpmhcc RPMH_CXO_PAD_CLK>,
> +                 <&tcsrcc TCSR_USB2_CLKREF_EN>;
> +        clock-names = "ref_src", "ref";

Doesn't match the schema.

> +
> +        vdd-supply = <&vreg_l1e_0p88>;
> +        vdda12-supply = <&vreg_l3e_1p2>;
> +
> +        resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
> +    };
> -- 
> 2.34.1
>