From: Dave Stevenson <dave.stevenson@raspberrypi.com>
To: Manivannan Sadhasivam <mani@kernel.org>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
linux-media@vger.kernel.org, devicetree@vger.kernel.org
Cc: Dave Stevenson <dave.stevenson@raspberrypi.com>
Subject: [PATCH 2/2] media: i2c: imx290: Add support for the mono sensor variant.
Date: Tue, 31 Jan 2023 19:07:00 +0000 [thread overview]
Message-ID: <20230131190700.3476796-3-dave.stevenson@raspberrypi.com> (raw)
In-Reply-To: <20230131190700.3476796-1-dave.stevenson@raspberrypi.com>
The IMX290 module is available as either mono or colour (Bayer).
Update the driver so that it can advertise the correct mono
formats instead of the colour ones.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
---
drivers/media/i2c/imx290.c | 47 ++++++++++++++++++++++++--------------
1 file changed, 30 insertions(+), 17 deletions(-)
diff --git a/drivers/media/i2c/imx290.c b/drivers/media/i2c/imx290.c
index 49d6c8bdec41..a370f1102334 100644
--- a/drivers/media/i2c/imx290.c
+++ b/drivers/media/i2c/imx290.c
@@ -13,6 +13,7 @@
#include <linux/gpio/consumer.h>
#include <linux/i2c.h>
#include <linux/module.h>
+#include <linux/of_device.h>
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
@@ -177,6 +178,7 @@ struct imx290 {
struct clk *xclk;
struct regmap *regmap;
u8 nlanes;
+ u8 mono;
struct v4l2_subdev sd;
struct media_pad pad;
@@ -414,7 +416,8 @@ static inline int imx290_modes_num(const struct imx290 *imx290)
}
struct imx290_format_info {
- u32 code;
+ /* Array of codes. [0] is for colour, [1] is for mono. */
+ u32 code[2];
u8 bpp;
const struct imx290_regval *regs;
unsigned int num_regs;
@@ -422,26 +425,27 @@ struct imx290_format_info {
static const struct imx290_format_info imx290_formats[] = {
{
- .code = MEDIA_BUS_FMT_SRGGB10_1X10,
+ .code = { MEDIA_BUS_FMT_SRGGB10_1X10, MEDIA_BUS_FMT_Y10_1X10 },
.bpp = 10,
.regs = imx290_10bit_settings,
.num_regs = ARRAY_SIZE(imx290_10bit_settings),
}, {
- .code = MEDIA_BUS_FMT_SRGGB12_1X12,
+ .code = { MEDIA_BUS_FMT_SRGGB12_1X12, MEDIA_BUS_FMT_Y12_1X12 },
.bpp = 12,
.regs = imx290_12bit_settings,
.num_regs = ARRAY_SIZE(imx290_12bit_settings),
}
};
-static const struct imx290_format_info *imx290_format_info(u32 code)
+static const struct imx290_format_info *
+imx290_format_info(const struct imx290 *imx290, u32 code)
{
unsigned int i;
for (i = 0; i < ARRAY_SIZE(imx290_formats); ++i) {
const struct imx290_format_info *info = &imx290_formats[i];
- if (info->code == code)
+ if (info->code[imx290->mono] == code)
return info;
}
@@ -536,7 +540,7 @@ static int imx290_set_black_level(struct imx290 *imx290,
const struct v4l2_mbus_framefmt *format,
unsigned int black_level, int *err)
{
- unsigned int bpp = imx290_format_info(format->code)->bpp;
+ unsigned int bpp = imx290_format_info(imx290, format->code)->bpp;
return imx290_write(imx290, IMX290_BLKLEVEL,
black_level >> (16 - bpp), err);
@@ -548,7 +552,7 @@ static int imx290_setup_format(struct imx290 *imx290,
const struct imx290_format_info *info;
int ret;
- info = imx290_format_info(format->code);
+ info = imx290_format_info(imx290, format->code);
ret = imx290_set_register_array(imx290, info->regs, info->num_regs);
if (ret < 0) {
@@ -844,10 +848,12 @@ static int imx290_enum_mbus_code(struct v4l2_subdev *sd,
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_mbus_code_enum *code)
{
+ const struct imx290 *imx290 = to_imx290(sd);
+
if (code->index >= ARRAY_SIZE(imx290_formats))
return -EINVAL;
- code->code = imx290_formats[code->index].code;
+ code->code = imx290_formats[code->index].code[imx290->mono];
return 0;
}
@@ -859,7 +865,7 @@ static int imx290_enum_frame_size(struct v4l2_subdev *sd,
const struct imx290 *imx290 = to_imx290(sd);
const struct imx290_mode *imx290_modes = imx290_modes_ptr(imx290);
- if (!imx290_format_info(fse->code))
+ if (!imx290_format_info(imx290, fse->code))
return -EINVAL;
if (fse->index >= imx290_modes_num(imx290))
@@ -888,8 +894,8 @@ static int imx290_set_fmt(struct v4l2_subdev *sd,
fmt->format.width = mode->width;
fmt->format.height = mode->height;
- if (!imx290_format_info(fmt->format.code))
- fmt->format.code = imx290_formats[0].code;
+ if (!imx290_format_info(imx290, fmt->format.code))
+ fmt->format.code = imx290_formats[0].code[imx290->mono];
fmt->format.field = V4L2_FIELD_NONE;
@@ -1177,16 +1183,29 @@ static s64 imx290_check_link_freqs(const struct imx290 *imx290,
return 0;
}
+static const struct of_device_id imx290_of_match[] = {
+ { .compatible = "sony,imx290" },
+ { .compatible = "sony,imx290-mono", .data = (void *)1 },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, imx290_of_match);
+
static int imx290_parse_dt(struct imx290 *imx290)
{
+ struct i2c_client *client = to_i2c_client(imx290->dev);
/* Only CSI2 is supported for now: */
struct v4l2_fwnode_endpoint ep = {
.bus_type = V4L2_MBUS_CSI2_DPHY
};
+ const struct of_device_id *match;
struct fwnode_handle *endpoint;
int ret;
s64 fq;
+ match = i2c_of_match_device(imx290_of_match, client);
+ if (match)
+ imx290->mono = match->data ? 1 : 0;
+
endpoint = fwnode_graph_get_next_endpoint(dev_fwnode(imx290->dev), NULL);
if (!endpoint) {
dev_err(imx290->dev, "Endpoint node not found\n");
@@ -1351,12 +1370,6 @@ static void imx290_remove(struct i2c_client *client)
pm_runtime_set_suspended(imx290->dev);
}
-static const struct of_device_id imx290_of_match[] = {
- { .compatible = "sony,imx290" },
- { /* sentinel */ }
-};
-MODULE_DEVICE_TABLE(of, imx290_of_match);
-
static struct i2c_driver imx290_i2c_driver = {
.probe_new = imx290_probe,
.remove = imx290_remove,
--
2.34.1
next prev parent reply other threads:[~2023-01-31 19:07 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-31 19:06 [PATCH 0/2] Add support for mono version of Sony IMX290 sensor Dave Stevenson
2023-01-31 19:06 ` [PATCH 1/2] media: dt-bindings: media: i2c: Add mono version to IMX290 bindings Dave Stevenson
2023-02-01 17:47 ` Rob Herring
2023-02-01 23:59 ` Laurent Pinchart
2023-01-31 19:07 ` Dave Stevenson [this message]
2023-02-01 7:03 ` [PATCH 2/2] media: i2c: imx290: Add support for the mono sensor variant Alexander Stein
2023-02-02 0:15 ` Laurent Pinchart
2023-02-02 11:20 ` Dave Stevenson
2023-02-07 0:48 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230131190700.3476796-3-dave.stevenson@raspberrypi.com \
--to=dave.stevenson@raspberrypi.com \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
--cc=mani@kernel.org \
--cc=mchehab@kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).