[PATCH v4 8/8] arm64: dts: qcom: sm8550-mtp: Add USB PHYs and HC nodes

[Abel Vesa <abel.vesa@linaro.org>]

Enable USB HC and PHYs nodes on SM8550 MTP board.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---

Changes since v3:
 * none

Changes since v2:
 * none

NOTE: This patch has been already merged. It is here only to provide
context for the rest of the patchset. There is a change with respect to
the clocks, but that will be sent as a separate/individual fix patch.

 arch/arm64/boot/dts/qcom/sm8550-mtp.dts | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
index 265862d0e44f..03862132fe41 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
@@ -550,6 +550,28 @@ &ufs_mem_phy {
 	status = "okay";
 };
 
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&vreg_l1e_0p88>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3f_0p91>;
+
+	status = "okay";
+};
+
 &xo_board {
 	clock-frequency = <76800000>;
 };
-- 
2.34.1