From: Johan Hovold <johan+linaro@kernel.org>
To: Alexandre Belloni <alexandre.belloni@bootlin.com>,
Bjorn Andersson <andersson@kernel.org>
Cc: Andy Gross <agross@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Alessandro Zummo <a.zummo@towertech.it>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Maximilian Luz <luzmaximilian@gmail.com>,
linux-arm-msm@vger.kernel.org, linux-rtc@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Johan Hovold <johan+linaro@kernel.org>
Subject: [PATCH v2 10/22] rtc: pm8xxx: rename alarm irq variable
Date: Thu, 2 Feb 2023 16:54:36 +0100 [thread overview]
Message-ID: <20230202155448.6715-11-johan+linaro@kernel.org> (raw)
In-Reply-To: <20230202155448.6715-1-johan+linaro@kernel.org>
Clean up the driver somewhat by renaming the driver-data alarm irq
variable by dropping the redundant "rtc" prefix.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/rtc/rtc-pm8xxx.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/rtc/rtc-pm8xxx.c b/drivers/rtc/rtc-pm8xxx.c
index 0fdbd233b10e..ea867b20573a 100644
--- a/drivers/rtc/rtc-pm8xxx.c
+++ b/drivers/rtc/rtc-pm8xxx.c
@@ -46,7 +46,7 @@ struct pm8xxx_rtc_regs {
* @rtc: rtc device for this driver.
* @regmap: regmap used to access RTC registers
* @allow_set_time: indicates whether writing to the RTC is allowed
- * @rtc_alarm_irq: rtc alarm irq number.
+ * @alarm_irq: alarm irq number
* @regs: rtc registers description.
* @dev: device structure
*/
@@ -54,7 +54,7 @@ struct pm8xxx_rtc {
struct rtc_device *rtc;
struct regmap *regmap;
bool allow_set_time;
- int rtc_alarm_irq;
+ int alarm_irq;
const struct pm8xxx_rtc_regs *regs;
struct device *dev;
};
@@ -364,8 +364,8 @@ static int pm8xxx_rtc_probe(struct platform_device *pdev)
return -ENXIO;
}
- rtc_dd->rtc_alarm_irq = platform_get_irq(pdev, 0);
- if (rtc_dd->rtc_alarm_irq < 0)
+ rtc_dd->alarm_irq = platform_get_irq(pdev, 0);
+ if (rtc_dd->alarm_irq < 0)
return -ENXIO;
rtc_dd->allow_set_time = of_property_read_bool(pdev->dev.of_node,
@@ -391,7 +391,7 @@ static int pm8xxx_rtc_probe(struct platform_device *pdev)
rtc_dd->rtc->range_max = U32_MAX;
/* Request the alarm IRQ */
- rc = devm_request_any_context_irq(&pdev->dev, rtc_dd->rtc_alarm_irq,
+ rc = devm_request_any_context_irq(&pdev->dev, rtc_dd->alarm_irq,
pm8xxx_alarm_trigger,
IRQF_TRIGGER_RISING,
"pm8xxx_rtc_alarm", rtc_dd);
@@ -404,7 +404,7 @@ static int pm8xxx_rtc_probe(struct platform_device *pdev)
if (rc)
return rc;
- rc = dev_pm_set_wake_irq(&pdev->dev, rtc_dd->rtc_alarm_irq);
+ rc = dev_pm_set_wake_irq(&pdev->dev, rtc_dd->alarm_irq);
if (rc)
return rc;
--
2.39.1
next prev parent reply other threads:[~2023-02-02 15:55 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-02 15:54 [PATCH v2 00/22] rtc: pm8xxx: add support for setting time using nvmem Johan Hovold
2023-02-02 15:54 ` [PATCH v2 01/22] rtc: pm8xxx: fix set-alarm race Johan Hovold
2023-02-07 3:12 ` David Collins
2023-02-07 15:13 ` Johan Hovold
2023-02-07 15:56 ` Johan Hovold
2023-02-02 15:54 ` [PATCH v2 02/22] rtc: pm8xxx: drop spmi error messages Johan Hovold
2023-02-02 15:54 ` [PATCH v2 03/22] rtc: pm8xxx: use regmap_update_bits() Johan Hovold
2023-02-07 3:14 ` David Collins
2023-02-02 15:54 ` [PATCH v2 04/22] rtc: pm8xxx: drop bogus locking Johan Hovold
2023-02-07 3:14 ` David Collins
2023-02-02 15:54 ` [PATCH v2 05/22] rtc: pm8xxx: return IRQ_NONE on errors Johan Hovold
2023-02-02 15:54 ` [PATCH v2 06/22] rtc: pm8xxx: drop unused register defines Johan Hovold
2023-02-07 3:15 ` David Collins
2023-02-07 15:16 ` Johan Hovold
2023-02-02 15:54 ` [PATCH v2 07/22] rtc: pm8xxx: use unaligned le32 helpers Johan Hovold
2023-02-07 3:15 ` David Collins
2023-02-02 15:54 ` [PATCH v2 08/22] rtc: pm8xxx: clean up time and alarm debugging Johan Hovold
2023-02-07 3:15 ` David Collins
2023-02-02 15:54 ` [PATCH v2 09/22] rtc: pm8xxx: rename struct device pointer Johan Hovold
2023-02-07 3:15 ` David Collins
2023-02-02 15:54 ` Johan Hovold [this message]
2023-02-07 3:15 ` [PATCH v2 10/22] rtc: pm8xxx: rename alarm irq variable David Collins
2023-02-02 15:54 ` [PATCH v2 11/22] rtc: pm8xxx: clean up comments Johan Hovold
2023-02-07 3:15 ` David Collins
2023-02-02 15:54 ` [PATCH v2 12/22] rtc: pm8xxx: use u32 for timestamps Johan Hovold
2023-02-02 15:54 ` [PATCH v2 13/22] rtc: pm8xxx: refactor read_time() Johan Hovold
2023-02-07 3:16 ` David Collins
2023-02-07 15:20 ` Johan Hovold
2023-02-02 15:54 ` [PATCH v2 14/22] rtc: pm8xxx: clean up local declarations Johan Hovold
2023-02-07 3:16 ` David Collins
2023-02-02 15:54 ` [PATCH v2 15/22] rtc: pm8xxx: drop error messages Johan Hovold
2023-02-02 15:54 ` [PATCH v2 16/22] dt-bindings: rtc: qcom-pm8xxx: add nvmem-cell offset Johan Hovold
2023-02-07 3:16 ` David Collins
2023-02-07 15:24 ` Johan Hovold
2023-02-10 22:48 ` Alexandre Belloni
2023-02-11 8:22 ` Johan Hovold
2023-02-11 16:44 ` Alexandre Belloni
2023-02-15 16:51 ` Johan Hovold
2023-02-24 8:21 ` Johan Hovold
2023-02-24 9:18 ` Alexandre Belloni
2023-02-24 9:24 ` Johan Hovold
2023-02-02 15:54 ` [PATCH v2 17/22] rtc: pm8xxx: add support for nvmem offset Johan Hovold
2023-02-03 3:31 ` Konrad Dybcio
2023-02-03 7:22 ` Johan Hovold
2023-02-07 3:16 ` David Collins
2023-02-07 15:36 ` Johan Hovold
2023-02-02 15:54 ` [PATCH v2 18/22] arm64: defconfig: enable Qualcomm SDAM nvmem driver Johan Hovold
2023-02-03 9:31 ` Krzysztof Kozlowski
2023-02-02 15:54 ` [PATCH v2 19/22] arm64: dts: qcom: sc8280xp-pmics: add pmk8280 rtc Johan Hovold
2023-02-02 15:54 ` [PATCH v2 20/22] arm64: dts: qcom: sc8280xp-pmics: add pmk8280 sdam nvram Johan Hovold
2023-02-02 15:54 ` [PATCH v2 21/22] arm64: dts: qcom: sc8280xp-crd: enable rtc Johan Hovold
2023-02-02 15:54 ` [PATCH v2 22/22] arm64: dts: qcom: sc8280xp-x13s: " Johan Hovold
2023-02-09 4:22 ` (subset) [PATCH v2 00/22] rtc: pm8xxx: add support for setting time using nvmem Bjorn Andersson
2023-02-09 22:25 ` Alexandre Belloni
2023-02-10 7:53 ` Johan Hovold
2023-02-10 9:04 ` Alexandre Belloni
2023-02-10 9:14 ` Johan Hovold
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230202155448.6715-11-johan+linaro@kernel.org \
--to=johan+linaro@kernel.org \
--cc=a.zummo@towertech.it \
--cc=agross@kernel.org \
--cc=alexandre.belloni@bootlin.com \
--cc=andersson@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rtc@vger.kernel.org \
--cc=luzmaximilian@gmail.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).