Re: [PATCH v12] thermal: drivers: mediatek: Add the Low Voltage Thermal Sensor driver

[Daniel Lezcano <daniel.lezcano@linaro.org>]

On Wed, Feb 01, 2023 at 08:55:07AM +0100, Krzysztof Kozlowski wrote:
> On 31/01/2023 16:38, bchihi@baylibre.com wrote:
> > From: Balsam CHIHI <bchihi@baylibre.com>
> > 
> > The Low Voltage Thermal Sensor (LVTS) is a multiple sensors, multi
> > controllers contained in a thermal domain.
> > 
> > A thermal domains can be the MCU or the AP.
> > 
> > Each thermal domains contain up to seven controllers, each thermal
> > controller handle up to four thermal sensors.
> > 
> > The LVTS has two Finite State Machines (FSM), one to handle the
> > functionin temperatures range like hot or cold temperature and another
> > one to handle monitoring trip point. The FSM notifies via interrupts
> > when a trip point is crossed.
> > 
> 
> (...)
> 
> > +
> > +struct lvts_domain {
> > +	struct lvts_ctrl *lvts_ctrl;
> > +	struct reset_control *reset;
> > +	struct clk *clk;
> > +	int num_lvts_ctrl;
> > +	void __iomem *base;
> > +	size_t calib_len;
> > +	u8 *calib;
> > +};
> > +
> > +#ifdef CONFIG_MTK_LVTS_THERMAL_DEBUGFS
> > +
> > +static struct dentry *root;
> 
> How do you handle two instances of driver?

For now, we can put the entry in /sys/kernel/debug/<dev_name>

I'm preparing a debugfs series for the thermal framework and that will provide
an entry to hook in for the sensors debugfs if available