From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Stephen Boyd <sboyd@kernel.org>,
Michael Turquette <mturquette@baylibre.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Taniya Das <quic_tdas@quicinc.com>
Cc: linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org,
devicetree@vger.kernel.org, Rob Clark <robdclark@gmail.com>,
Abhinav Kumar <quic_abhinavk@quicinc.com>,
Sean Paul <sean@poorly.run>,
dri-devel@lists.freedesktop.org, freedreno@lists.freedesktop.org,
David Airlie <airlied@gmail.com>, Daniel Vetter <daniel@ffwll.ch>
Subject: [PATCH v2 7/8] arm64: dts: qcom: sm8350: add GPU, GMU, GPU CC and SMMU nodes
Date: Mon, 6 Feb 2023 16:57:06 +0200 [thread overview]
Message-ID: <20230206145707.122937-8-dmitry.baryshkov@linaro.org> (raw)
In-Reply-To: <20230206145707.122937-1-dmitry.baryshkov@linaro.org>
Add device nodes required to enable GPU on the SM8350 platform.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm64/boot/dts/qcom/sm8350.dtsi | 178 +++++++++++++++++++++++++++
1 file changed, 178 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index e5b308957f88..c0992cf54d3a 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -7,6 +7,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,dispcc-sm8350.h>
#include <dt-bindings/clock/qcom,gcc-sm8350.h>
+#include <dt-bindings/clock/qcom,gpucc-sm8350.h>
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/dma/qcom-gpi.h>
#include <dt-bindings/gpio/gpio.h>
@@ -1767,6 +1768,183 @@ tcsr_mutex: hwlock@1f40000 {
#hwlock-cells = <1>;
};
+ gpu: gpu@3d00000 {
+ compatible = "qcom,adreno-660.1", "qcom,adreno";
+
+ reg = <0 0x03d00000 0 0x40000>,
+ <0 0x03d9e000 0 0x1000>,
+ <0 0x03d61000 0 0x800>;
+ reg-names = "kgsl_3d0_reg_memory",
+ "cx_mem",
+ "cx_dbgc";
+
+ interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+
+ iommus = <&adreno_smmu 0 0x400>, <&adreno_smmu 1 0x400>;
+
+ operating-points-v2 = <&gpu_opp_table>;
+
+ qcom,gmu = <&gmu>;
+
+ status = "disabled";
+
+ zap-shader {
+ memory-region = <&pil_gpu_mem>;
+ };
+
+ /* note: downstream checks gpu binning for 670 Mhz */
+ gpu_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-840000000 {
+ opp-hz = /bits/ 64 <840000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+ };
+
+ opp-778000000 {
+ opp-hz = /bits/ 64 <778000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+ };
+
+ opp-738000000 {
+ opp-hz = /bits/ 64 <738000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+ };
+
+ opp-676000000 {
+ opp-hz = /bits/ 64 <676000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+ };
+
+ opp-608000000 {
+ opp-hz = /bits/ 64 <608000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
+ };
+
+ opp-540000000 {
+ opp-hz = /bits/ 64 <540000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+ };
+
+ opp-491000000 {
+ opp-hz = /bits/ 64 <491000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
+ };
+
+ opp-443000000 {
+ opp-hz = /bits/ 64 <443000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+ };
+
+ opp-379000000 {
+ opp-hz = /bits/ 64 <379000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
+ };
+
+ opp-315000000 {
+ opp-hz = /bits/ 64 <315000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+ };
+ };
+ };
+
+ gmu: gmu@3d6a000 {
+ compatible = "qcom,adreno-gmu-660.1", "qcom,adreno-gmu";
+
+ reg = <0 0x03d6a000 0 0x34000>,
+ <0 0x03de0000 0 0x10000>,
+ <0 0x0b290000 0 0x10000>;
+ reg-names = "gmu", "rscc", "gmu_pdc";
+
+ interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hfi", "gmu";
+
+ clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
+ <&gpucc GPU_CC_CXO_CLK>,
+ <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+ <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+ <&gpucc GPU_CC_AHB_CLK>,
+ <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+ <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>;
+ clock-names = "gmu",
+ "cxo",
+ "axi",
+ "memnoc",
+ "ahb",
+ "hub",
+ "smmu_vote";
+
+ power-domains = <&gpucc GPU_CX_GDSC>,
+ <&gpucc GPU_GX_GDSC>;
+ power-domain-names = "cx",
+ "gx";
+
+ iommus = <&adreno_smmu 5 0x400>;
+
+ operating-points-v2 = <&gmu_opp_table>;
+
+ gmu_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+ };
+ };
+ };
+
+ gpucc: clock-controller@3d90000 {
+ compatible = "qcom,sm8350-gpucc";
+ reg = <0 0x03d90000 0 0x9000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+ <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+ clock-names = "bi_tcxo",
+ "gcc_gpu_gpll0_clk_src",
+ "gcc_gpu_gpll0_div_clk_src";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
+ adreno_smmu: iommu@3da0000 {
+ compatible = "qcom,sm8350-smmu-500", "qcom,adreno-smmu", "arm,mmu-500";
+ reg = <0 0x03da0000 0 0x20000>;
+ #iommu-cells = <2>;
+ #global-interrupts = <2>;
+ interrupts = <GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+ <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
+ <&gpucc GPU_CC_AHB_CLK>,
+ <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
+ <&gpucc GPU_CC_CX_GMU_CLK>,
+ <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+ <&gpucc GPU_CC_HUB_AON_CLK>;
+ clock-names = "bus",
+ "iface",
+ "ahb",
+ "hlos1_vote_gpu_smmu",
+ "cx_gmu",
+ "hub_cx_int",
+ "hub_aon";
+
+ power-domains = <&gpucc GPU_CX_GDSC>;
+ dma-coherent;
+ };
+
lpass_ag_noc: interconnect@3c40000 {
compatible = "qcom,sm8350-lpass-ag-noc";
reg = <0 0x03c40000 0 0xf080>;
--
2.39.1
next prev parent reply other threads:[~2023-02-06 14:57 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-06 14:56 [PATCH v2 0/8] arm64: dts: qcom: sm8350: enable GPU on the HDK board Dmitry Baryshkov
2023-02-06 14:57 ` [PATCH v2 1/8] dt-bindings: clock: Merge qcom,gpucc-sm8350 into qcom,gpucc.yaml Dmitry Baryshkov
2023-02-07 20:40 ` Rob Herring
2023-02-06 14:57 ` [PATCH v2 2/8] dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1 Dmitry Baryshkov
2023-02-06 20:19 ` Konrad Dybcio
2023-02-06 14:57 ` [PATCH v2 3/8] dt-bindings: display/msm/gmu: add Adreno 660 support Dmitry Baryshkov
2023-02-07 20:41 ` Rob Herring
2023-02-06 14:57 ` [PATCH v2 4/8] arm64: dts: qcom: sm8350: reorder device nodes Dmitry Baryshkov
2023-02-08 9:22 ` Konrad Dybcio
2023-02-09 3:28 ` Bjorn Andersson
2023-02-09 13:40 ` Dmitry Baryshkov
2023-02-06 14:57 ` [PATCH v2 5/8] arm64: dts: qcom: sm8350: move more nodes to correct place Dmitry Baryshkov
2023-02-06 14:57 ` [PATCH v2 6/8] arm64: dts: qcom: sm8350: finish reordering nodes Dmitry Baryshkov
2023-02-06 14:57 ` Dmitry Baryshkov [this message]
2023-02-06 14:57 ` [PATCH v2 8/8] arm64: dts: qcom: sm8350-hdk: enable GPU Dmitry Baryshkov
2023-02-08 16:43 ` Konrad Dybcio
2023-02-09 4:22 ` (subset) [PATCH v2 0/8] arm64: dts: qcom: sm8350: enable GPU on the HDK board Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230206145707.122937-8-dmitry.baryshkov@linaro.org \
--to=dmitry.baryshkov@linaro.org \
--cc=agross@kernel.org \
--cc=airlied@gmail.com \
--cc=andersson@kernel.org \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=freedreno@lists.freedesktop.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=quic_abhinavk@quicinc.com \
--cc=quic_tdas@quicinc.com \
--cc=robdclark@gmail.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=sean@poorly.run \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).