[PATCH net-next v2 0/6] net: stmmac: add renesas,rzn1-gmac support

["Clément Léger" <clement.leger@bootlin.com>]

The rzn1-gmac instance is connected to a PCS (MIIC). In order to use
this pcs, add support in the sttmac driver to set a generic phylink pcs
device instead of the xpcs only. Moreover, it adds support to provide
a phylink pcs device from the stmmac platform data and use it with the
driver. It also adds the bindings and the new rzn1-gmac driver that
retrieve this pcs from the device-tree.

---
V2:
 - Remove patch that moves phylink_start() earlier in init
 - Add miic_early_qsetup()  which allows initializing some miic port
   earlier to provide a RX clock to stmmac IP
 - Call miic_early_setup() in rzn1 stmmac driver
 - Fix bindings

Clément Léger (6):
  net: pcs: rzn1-miic: add pcs_early_setup() function
  net: stmmac: add support to use a generic phylink_pcs as PCS
  net: stmmac: add support to provide pcs from platform data
  dt-bindings: net: renesas,rzn1-gmac: Document RZ/N1 GMAC support
  net: stmmac: add support for RZ/N1 GMAC
  ARM: dts: r9a06g032: describe GMAC1

 .../bindings/net/renesas,rzn1-gmac.yaml       |  67 ++++++++++
 arch/arm/boot/dts/r9a06g032.dtsi              |  18 +++
 drivers/net/ethernet/stmicro/stmmac/Kconfig   |  11 ++
 drivers/net/ethernet/stmicro/stmmac/Makefile  |   1 +
 drivers/net/ethernet/stmicro/stmmac/common.h  |   2 +
 .../net/ethernet/stmicro/stmmac/dwmac-rzn1.c  | 120 ++++++++++++++++++
 .../net/ethernet/stmicro/stmmac/stmmac_main.c |   8 +-
 .../net/ethernet/stmicro/stmmac/stmmac_mdio.c |   1 +
 drivers/net/pcs/pcs-rzn1-miic.c               |  12 ++
 include/linux/pcs-rzn1-miic.h                 |   3 +
 include/linux/stmmac.h                        |   1 +
 11 files changed, 240 insertions(+), 4 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/renesas,rzn1-gmac.yaml
 create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-rzn1.c

-- 
2.39.0