From: William Zhang <william.zhang@broadcom.com>
To: Linux SPI List <linux-spi@vger.kernel.org>,
Broadcom Kernel List <bcm-kernel-feedback-list@broadcom.com>
Cc: f.fainelli@gmail.com, dregan@mail.com, joel.peshkin@broadcom.com,
dan.beygelman@broadcom.com, anand.gore@broadcom.com,
kursad.oney@broadcom.com, tomer.yacoby@broadcom.com,
jonas.gorski@gmail.com,
"William Zhang" <william.zhang@broadcom.com>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
"Rafał Miłecki" <rafal@milecki.pl>,
"Rob Herring" <robh+dt@kernel.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v4 03/15] ARM: dts: broadcom: bcmbca: Add spi controller node
Date: Thu, 9 Feb 2023 12:02:34 -0800 [thread overview]
Message-ID: <20230209200246.141520-4-william.zhang@broadcom.com> (raw)
In-Reply-To: <20230209200246.141520-1-william.zhang@broadcom.com>
Add support for HSSPI controller in ARMv7 chip dts files.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
---
(no changes since v3)
Changes in v3:
- Drop the generic compatible string brcm,bcmbca-hsspi
Changes in v2:
- Update compatible string with SoC model number, controller version
info and bcmbca fall back name
- Add interrupt property
arch/arm/boot/dts/bcm47622.dtsi | 18 ++++++++++++++++++
arch/arm/boot/dts/bcm63138.dtsi | 18 ++++++++++++++++++
arch/arm/boot/dts/bcm63148.dtsi | 18 ++++++++++++++++++
arch/arm/boot/dts/bcm63178.dtsi | 19 +++++++++++++++++++
arch/arm/boot/dts/bcm6756.dtsi | 19 +++++++++++++++++++
arch/arm/boot/dts/bcm6846.dtsi | 18 ++++++++++++++++++
arch/arm/boot/dts/bcm6855.dtsi | 19 +++++++++++++++++++
arch/arm/boot/dts/bcm6878.dtsi | 19 +++++++++++++++++++
arch/arm/boot/dts/bcm947622.dts | 4 ++++
arch/arm/boot/dts/bcm963138.dts | 4 ++++
arch/arm/boot/dts/bcm963138dvt.dts | 4 ++++
arch/arm/boot/dts/bcm963148.dts | 4 ++++
arch/arm/boot/dts/bcm963178.dts | 4 ++++
arch/arm/boot/dts/bcm96756.dts | 4 ++++
arch/arm/boot/dts/bcm96846.dts | 4 ++++
arch/arm/boot/dts/bcm96855.dts | 4 ++++
arch/arm/boot/dts/bcm96878.dts | 4 ++++
17 files changed, 184 insertions(+)
diff --git a/arch/arm/boot/dts/bcm47622.dtsi b/arch/arm/boot/dts/bcm47622.dtsi
index f4b2db9bc4ab..cd25ed2757b7 100644
--- a/arch/arm/boot/dts/bcm47622.dtsi
+++ b/arch/arm/boot/dts/bcm47622.dtsi
@@ -88,6 +88,12 @@ uart_clk: uart-clk {
clock-div = <4>;
clock-mult = <1>;
};
+
+ hsspi_pll: hsspi-pll {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ };
};
psci {
@@ -119,6 +125,18 @@ bus@ff800000 {
#size-cells = <1>;
ranges = <0 0xff800000 0x800000>;
+ hsspi: spi@1000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,bcm47622-hsspi", "brcm,bcmbca-hsspi-v1.0";
+ reg = <0x1000 0x600>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&hsspi_pll &hsspi_pll>;
+ clock-names = "hsspi", "pll";
+ num-cs = <8>;
+ status = "disabled";
+ };
+
uart0: serial@12000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x12000 0x1000>;
diff --git a/arch/arm/boot/dts/bcm63138.dtsi b/arch/arm/boot/dts/bcm63138.dtsi
index b774a8d63813..93281c47c9ba 100644
--- a/arch/arm/boot/dts/bcm63138.dtsi
+++ b/arch/arm/boot/dts/bcm63138.dtsi
@@ -66,6 +66,12 @@ apb_clk: apb_clk {
clock-div = <4>;
clock-mult = <1>;
};
+
+ hsspi_pll: hsspi-pll {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <400000000>;
+ };
};
/* ARM bus */
@@ -203,6 +209,18 @@ serial1: serial@620 {
status = "disabled";
};
+ hsspi: spi@1000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,bcm63138-hsspi", "brcm,bcmbca-hsspi-v1.0";
+ reg = <0x1000 0x600>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&hsspi_pll &hsspi_pll>;
+ clock-names = "hsspi", "pll";
+ num-cs = <8>;
+ status = "disabled";
+ };
+
nand_controller: nand-controller@2000 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/bcm63148.dtsi b/arch/arm/boot/dts/bcm63148.dtsi
index 7cd55d64de71..ba7f265db121 100644
--- a/arch/arm/boot/dts/bcm63148.dtsi
+++ b/arch/arm/boot/dts/bcm63148.dtsi
@@ -60,6 +60,12 @@ periph_clk: periph-clk {
#clock-cells = <0>;
clock-frequency = <50000000>;
};
+
+ hsspi_pll: hsspi-pll {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <400000000>;
+ };
};
psci {
@@ -100,5 +106,17 @@ uart0: serial@600 {
clock-names = "refclk";
status = "disabled";
};
+
+ hsspi: spi@1000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,bcm63148-hsspi", "brcm,bcmbca-hsspi-v1.0";
+ reg = <0x1000 0x600>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&hsspi_pll &hsspi_pll>;
+ clock-names = "hsspi", "pll";
+ num-cs = <8>;
+ status = "disabled";
+ };
};
};
diff --git a/arch/arm/boot/dts/bcm63178.dtsi b/arch/arm/boot/dts/bcm63178.dtsi
index 043e699cbc27..d8268a1e889b 100644
--- a/arch/arm/boot/dts/bcm63178.dtsi
+++ b/arch/arm/boot/dts/bcm63178.dtsi
@@ -71,6 +71,7 @@ periph_clk: periph-clk {
#clock-cells = <0>;
clock-frequency = <200000000>;
};
+
uart_clk: uart-clk {
compatible = "fixed-factor-clock";
#clock-cells = <0>;
@@ -78,6 +79,12 @@ uart_clk: uart-clk {
clock-div = <4>;
clock-mult = <1>;
};
+
+ hsspi_pll: hsspi-pll {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ };
};
psci {
@@ -109,6 +116,18 @@ bus@ff800000 {
#size-cells = <1>;
ranges = <0 0xff800000 0x800000>;
+ hsspi: spi@1000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,bcm63178-hsspi", "brcm,bcmbca-hsspi-v1.0";
+ reg = <0x1000 0x600>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&hsspi_pll &hsspi_pll>;
+ clock-names = "hsspi", "pll";
+ num-cs = <8>;
+ status = "disabled";
+ };
+
uart0: serial@12000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x12000 0x1000>;
diff --git a/arch/arm/boot/dts/bcm6756.dtsi b/arch/arm/boot/dts/bcm6756.dtsi
index 5c72219bc194..49ecc1f0c18c 100644
--- a/arch/arm/boot/dts/bcm6756.dtsi
+++ b/arch/arm/boot/dts/bcm6756.dtsi
@@ -88,6 +88,12 @@ uart_clk: uart-clk {
clock-div = <4>;
clock-mult = <1>;
};
+
+ hsspi_pll: hsspi-pll {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ };
};
psci {
@@ -119,6 +125,19 @@ bus@ff800000 {
#size-cells = <1>;
ranges = <0 0xff800000 0x800000>;
+ hsspi: spi@1000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,bcm6756-hsspi", "brcm,bcmbca-hsspi-v1.1";
+ reg = <0x1000 0x600>, <0x2610 0x4>;
+ reg-names = "hsspi", "spim-ctrl";
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&hsspi_pll &hsspi_pll>;
+ clock-names = "hsspi", "pll";
+ num-cs = <8>;
+ status = "disabled";
+ };
+
uart0: serial@12000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x12000 0x1000>;
diff --git a/arch/arm/boot/dts/bcm6846.dtsi b/arch/arm/boot/dts/bcm6846.dtsi
index 81513a793815..fbc7d3a5dc5f 100644
--- a/arch/arm/boot/dts/bcm6846.dtsi
+++ b/arch/arm/boot/dts/bcm6846.dtsi
@@ -61,6 +61,12 @@ periph_clk: periph-clk {
#clock-cells = <0>;
clock-frequency = <200000000>;
};
+
+ hsspi_pll: hsspi-pll {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <400000000>;
+ };
};
psci {
@@ -100,5 +106,17 @@ uart0: serial@640 {
clock-names = "refclk";
status = "disabled";
};
+
+ hsspi: spi@1000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,bcm6846-hsspi", "brcm,bcmbca-hsspi-v1.0";
+ reg = <0x1000 0x600>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&hsspi_pll &hsspi_pll>;
+ clock-names = "hsspi", "pll";
+ num-cs = <8>;
+ status = "disabled";
+ };
};
};
diff --git a/arch/arm/boot/dts/bcm6855.dtsi b/arch/arm/boot/dts/bcm6855.dtsi
index 5fa5feac0e29..5e0fe26530f1 100644
--- a/arch/arm/boot/dts/bcm6855.dtsi
+++ b/arch/arm/boot/dts/bcm6855.dtsi
@@ -78,6 +78,12 @@ uart_clk: uart-clk {
clock-div = <4>;
clock-mult = <1>;
};
+
+ hsspi_pll: hsspi-pll {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ };
};
psci {
@@ -109,6 +115,19 @@ bus@ff800000 {
#size-cells = <1>;
ranges = <0 0xff800000 0x800000>;
+ hsspi: spi@1000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,bcm6855-hsspi", "brcm,bcmbca-hsspi-v1.1";
+ reg = <0x1000 0x600>, <0x2610 0x4>;
+ reg-names = "hsspi", "spim-ctrl";
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&hsspi_pll &hsspi_pll>;
+ clock-names = "hsspi", "pll";
+ num-cs = <8>;
+ status = "disabled";
+ };
+
uart0: serial@12000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x12000 0x1000>;
diff --git a/arch/arm/boot/dts/bcm6878.dtsi b/arch/arm/boot/dts/bcm6878.dtsi
index 4ec836ac4baf..96529d3d4dc2 100644
--- a/arch/arm/boot/dts/bcm6878.dtsi
+++ b/arch/arm/boot/dts/bcm6878.dtsi
@@ -61,6 +61,7 @@ periph_clk: periph-clk {
#clock-cells = <0>;
clock-frequency = <200000000>;
};
+
uart_clk: uart-clk {
compatible = "fixed-factor-clock";
#clock-cells = <0>;
@@ -68,6 +69,12 @@ uart_clk: uart-clk {
clock-div = <4>;
clock-mult = <1>;
};
+
+ hsspi_pll: hsspi-pll {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ };
};
psci {
@@ -100,6 +107,18 @@ bus@ff800000 {
#size-cells = <1>;
ranges = <0 0xff800000 0x800000>;
+ hsspi: spi@1000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,bcm6878-hsspi", "brcm,bcmbca-hsspi-v1.0";
+ reg = <0x1000 0x600>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&hsspi_pll &hsspi_pll>;
+ clock-names = "hsspi", "pll";
+ num-cs = <8>;
+ status = "disabled";
+ };
+
uart0: serial@12000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x12000 0x1000>;
diff --git a/arch/arm/boot/dts/bcm947622.dts b/arch/arm/boot/dts/bcm947622.dts
index 6f083724ab8e..93b8ce22678d 100644
--- a/arch/arm/boot/dts/bcm947622.dts
+++ b/arch/arm/boot/dts/bcm947622.dts
@@ -28,3 +28,7 @@ memory@0 {
&uart0 {
status = "okay";
};
+
+&hsspi {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm963138.dts b/arch/arm/boot/dts/bcm963138.dts
index d28c4f130ca2..1b405c249213 100644
--- a/arch/arm/boot/dts/bcm963138.dts
+++ b/arch/arm/boot/dts/bcm963138.dts
@@ -25,3 +25,7 @@ memory@0 {
&serial0 {
status = "okay";
};
+
+&hsspi {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm963138dvt.dts b/arch/arm/boot/dts/bcm963138dvt.dts
index 15bec75be74c..b5af61853a07 100644
--- a/arch/arm/boot/dts/bcm963138dvt.dts
+++ b/arch/arm/boot/dts/bcm963138dvt.dts
@@ -50,3 +50,7 @@ &ahci {
&sata_phy {
status = "okay";
};
+
+&hsspi {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm963148.dts b/arch/arm/boot/dts/bcm963148.dts
index 98f6a6d09f50..1f5d6d783f09 100644
--- a/arch/arm/boot/dts/bcm963148.dts
+++ b/arch/arm/boot/dts/bcm963148.dts
@@ -28,3 +28,7 @@ memory@0 {
&uart0 {
status = "okay";
};
+
+&hsspi {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm963178.dts b/arch/arm/boot/dts/bcm963178.dts
index fa096e9cde23..d036e99dd8d1 100644
--- a/arch/arm/boot/dts/bcm963178.dts
+++ b/arch/arm/boot/dts/bcm963178.dts
@@ -28,3 +28,7 @@ memory@0 {
&uart0 {
status = "okay";
};
+
+&hsspi {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm96756.dts b/arch/arm/boot/dts/bcm96756.dts
index 9a4a87ba9c8a..8b104f3fb14a 100644
--- a/arch/arm/boot/dts/bcm96756.dts
+++ b/arch/arm/boot/dts/bcm96756.dts
@@ -28,3 +28,7 @@ memory@0 {
&uart0 {
status = "okay";
};
+
+&hsspi {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm96846.dts b/arch/arm/boot/dts/bcm96846.dts
index c70ebccabc19..55852c229608 100644
--- a/arch/arm/boot/dts/bcm96846.dts
+++ b/arch/arm/boot/dts/bcm96846.dts
@@ -28,3 +28,7 @@ memory@0 {
&uart0 {
status = "okay";
};
+
+&hsspi {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm96855.dts b/arch/arm/boot/dts/bcm96855.dts
index 4438152561ac..2ad880af2104 100644
--- a/arch/arm/boot/dts/bcm96855.dts
+++ b/arch/arm/boot/dts/bcm96855.dts
@@ -28,3 +28,7 @@ memory@0 {
&uart0 {
status = "okay";
};
+
+&hsspi {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm96878.dts b/arch/arm/boot/dts/bcm96878.dts
index 8fbc175cb452..b7af8ade7a9d 100644
--- a/arch/arm/boot/dts/bcm96878.dts
+++ b/arch/arm/boot/dts/bcm96878.dts
@@ -28,3 +28,7 @@ memory@0 {
&uart0 {
status = "okay";
};
+
+&hsspi {
+ status = "okay";
+};
--
2.37.3
next prev parent reply other threads:[~2023-02-09 20:04 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-09 20:02 [PATCH v4 00/15] spi: bcm63xx-hsspi: driver and doc updates William Zhang
2023-02-09 20:02 ` [PATCH v4 01/15] dt-bindings: spi: Convert bcm63xx-hsspi bindings to json-schema William Zhang
2023-02-09 20:02 ` [PATCH v4 02/15] dt-bindings: spi: Add bcmbca-hsspi controller support William Zhang
2023-02-09 20:02 ` William Zhang [this message]
2023-02-09 20:02 ` [PATCH v4 04/15] arm64: dts: broadcom: bcmbca: Add spi controller node William Zhang
2023-02-10 12:53 ` [PATCH v4 00/15] spi: bcm63xx-hsspi: driver and doc updates Mark Brown
2023-02-11 0:54 ` (subset) " Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230209200246.141520-4-william.zhang@broadcom.com \
--to=william.zhang@broadcom.com \
--cc=anand.gore@broadcom.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=dan.beygelman@broadcom.com \
--cc=devicetree@vger.kernel.org \
--cc=dregan@mail.com \
--cc=f.fainelli@gmail.com \
--cc=joel.peshkin@broadcom.com \
--cc=jonas.gorski@gmail.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=kursad.oney@broadcom.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=rafal@milecki.pl \
--cc=robh+dt@kernel.org \
--cc=tomer.yacoby@broadcom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).