From: Guenter Roeck <linux@roeck-us.net>
To: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Cc: linux-watchdog@vger.kernel.org, wim@linux-watchdog.org,
robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
matthias.bgg@gmail.com, arinc.unal@arinc9.com,
tsbogend@alpha.franken.de, p.zabel@pengutronix.de,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
linux-mips@vger.kernel.org
Subject: Re: [PATCH v7 5/5] watchdog: mt7621-wdt: avoid ralink architecture dependent code
Date: Tue, 14 Feb 2023 07:11:29 -0800 [thread overview]
Message-ID: <20230214151129.GD742354@roeck-us.net> (raw)
In-Reply-To: <20230214103936.1061078-6-sergio.paracuellos@gmail.com>
On Tue, Feb 14, 2023 at 11:39:36AM +0100, Sergio Paracuellos wrote:
> MT7621 SoC has a system controller node. Watchdog need to access to reset
> status register. Ralink architecture and related driver are old and from
> the beggining they are using some architecture dependent operations for
> accessing this shared registers through 'asm/mach-ralink/ralink_regs.h'
> header file. However this is not ideal from a driver perspective which can
> just access to the system controller registers in an arch independent way
> using regmap syscon APIs. Update Kconfig accordingly to select new added
> dependencies and allow driver to be compile tested.
>
> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
> ---
> drivers/watchdog/Kconfig | 4 +++-
> drivers/watchdog/mt7621_wdt.c | 22 +++++++++++++++++-----
> 2 files changed, 20 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index b64bc49c7f30..cf752ad64392 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -1865,7 +1865,9 @@ config GXP_WATCHDOG
> config MT7621_WDT
> tristate "Mediatek SoC watchdog"
> select WATCHDOG_CORE
> - depends on SOC_MT7620 || SOC_MT7621
> + select REGMAP_MMIO
> + select MFD_SYSCON
> + depends on SOC_MT7620 || SOC_MT7621 || COMPILE_TEST
> help
> Hardware driver for the Mediatek/Ralink MT7621/8 SoC Watchdog Timer.
>
> diff --git a/drivers/watchdog/mt7621_wdt.c b/drivers/watchdog/mt7621_wdt.c
> index 40fb2c9ba9d9..f37d8298a480 100644
> --- a/drivers/watchdog/mt7621_wdt.c
> +++ b/drivers/watchdog/mt7621_wdt.c
> @@ -15,8 +15,8 @@
> #include <linux/moduleparam.h>
> #include <linux/platform_device.h>
> #include <linux/mod_devicetable.h>
> -
> -#include <asm/mach-ralink/ralink_regs.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/regmap.h>
>
> #define SYSC_RSTSTAT 0x38
> #define WDT_RST_CAUSE BIT(1)
> @@ -34,6 +34,7 @@
> struct mt7621_wdt_data {
> void __iomem *base;
> struct reset_control *rst;
> + struct regmap *sysc;
> struct watchdog_device wdt;
> };
>
> @@ -104,9 +105,12 @@ static int mt7621_wdt_stop(struct watchdog_device *w)
> return 0;
> }
>
> -static int mt7621_wdt_bootcause(void)
> +static int mt7621_wdt_bootcause(struct mt7621_wdt_data *d)
> {
> - if (rt_sysc_r32(SYSC_RSTSTAT) & WDT_RST_CAUSE)
> + u32 val;
> +
> + regmap_read(d->sysc, SYSC_RSTSTAT, &val);
> + if (val & WDT_RST_CAUSE)
> return WDIOF_CARDRESET;
>
> return 0;
> @@ -134,6 +138,7 @@ static const struct watchdog_ops mt7621_wdt_ops = {
>
> static int mt7621_wdt_probe(struct platform_device *pdev)
> {
> + struct device_node *np = pdev->dev.of_node;
> struct device *dev = &pdev->dev;
> struct watchdog_device *mt7621_wdt;
> struct mt7621_wdt_data *drvdata;
> @@ -143,6 +148,13 @@ static int mt7621_wdt_probe(struct platform_device *pdev)
> if (!drvdata)
> return -ENOMEM;
>
> + drvdata->sysc = syscon_regmap_lookup_by_phandle(np, "mediatek,sysctl");
> + if (IS_ERR(drvdata->sysc)) {
> + drvdata->sysc = syscon_regmap_lookup_by_compatible("mediatek,mt7621-sysc");
> + if (IS_ERR(drvdata->sysc))
> + return PTR_ERR(drvdata->sysc);
> + }
> +
> drvdata->base = devm_platform_ioremap_resource(pdev, 0);
> if (IS_ERR(drvdata->base))
> return PTR_ERR(drvdata->base);
> @@ -158,7 +170,7 @@ static int mt7621_wdt_probe(struct platform_device *pdev)
> mt7621_wdt->max_timeout = 0xfffful / 1000;
> mt7621_wdt->parent = dev;
>
> - mt7621_wdt->bootstatus = mt7621_wdt_bootcause();
> + mt7621_wdt->bootstatus = mt7621_wdt_bootcause(drvdata);
>
> watchdog_init_timeout(mt7621_wdt, mt7621_wdt->max_timeout, dev);
> watchdog_set_nowayout(mt7621_wdt, nowayout);
> --
> 2.25.1
>
prev parent reply other threads:[~2023-02-14 15:11 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-14 10:39 [PATCH v7 0/5] watchdog: mt7621-wdt: avoid globals and arch dependencies Sergio Paracuellos
2023-02-14 10:39 ` [PATCH v7 1/5] dt-bindings: watchdog: mt7621-wdt: add phandle to access system controller registers Sergio Paracuellos
2023-02-14 15:10 ` Guenter Roeck
2023-02-14 10:39 ` [PATCH v7 2/5] mips: dts: ralink: mt7621: rename watchdog node from 'wdt' into 'watchdog' Sergio Paracuellos
2023-02-14 15:11 ` Guenter Roeck
2023-02-14 15:12 ` Sergio Paracuellos
2023-02-28 4:44 ` Sergio Paracuellos
2023-02-28 8:39 ` Thomas Bogendoerfer
2023-02-28 8:51 ` Sergio Paracuellos
2023-02-28 14:55 ` Guenter Roeck
2023-02-28 15:46 ` Sergio Paracuellos
2023-02-28 22:15 ` Thomas Bogendoerfer
2023-02-14 10:39 ` [PATCH v7 3/5] mips: dts: ralink: mt7621: add phandle to system controller node for watchdog Sergio Paracuellos
2023-02-14 15:11 ` Guenter Roeck
2023-02-28 22:15 ` Thomas Bogendoerfer
2023-02-14 10:39 ` [PATCH v7 4/5] watchdog: mt7621-wdt: avoid static global declarations Sergio Paracuellos
2023-02-14 10:39 ` [PATCH v7 5/5] watchdog: mt7621-wdt: avoid ralink architecture dependent code Sergio Paracuellos
2023-02-14 15:11 ` Guenter Roeck [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230214151129.GD742354@roeck-us.net \
--to=linux@roeck-us.net \
--cc=arinc.unal@arinc9.com \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=matthias.bgg@gmail.com \
--cc=p.zabel@pengutronix.de \
--cc=robh+dt@kernel.org \
--cc=sergio.paracuellos@gmail.com \
--cc=tsbogend@alpha.franken.de \
--cc=wim@linux-watchdog.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).