Re: [PATCH v2 2/2] ARM: dts: r9a06g032: add r9a06g032-rzn1d400-eb board device-tree

["Clément Léger" <clement.leger@bootlin.com>]

Le Tue, 14 Feb 2023 17:25:14 +0100,
Geert Uytterhoeven <geert@linux-m68k.org> a écrit :

> Hi Clément,
> 
> CC Gareth
> 
> On Thu, Feb 9, 2023 at 2:32 PM Clément Léger <clement.leger@bootlin.com> wrote:
> > The EB board (Expansion board) supports both RZ/N1D and RZ-N1S. Since this
> > configuration targets only the RZ/N1D, it is named r9a06g032-rzn1d400-eb.
> > It adds support for the 2 additional switch ports (port C and D) that are
> > available on that board.
> >
> > Signed-off-by: Clément Léger <clement.leger@bootlin.com>  
> 
> Thanks for your patch!
> 
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/r9a06g032-rzn1d400-eb.dts
> > @@ -0,0 +1,94 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Device Tree Source for the RZN1D-EB Board
> > + *
> > + * Copyright (C) 2023 Schneider-Electric
> > + *
> > + */
> > +
> > +#include "r9a06g032-rzn1d400-db.dts"
> > +
> > +/ {
> > +       model = "RZN1D-EB Board";
> > +       compatible = "renesas,rzn1d400-eb", "renesas,rzn1d400-db",
> > +                    "renesas,r9a06g032";
> > +};
> > +
> > +&mii_conv2 {
> > +       renesas,miic-input = <MIIC_SWITCH_PORTD>;
> > +       status = "okay";
> > +};
> > +
> > +&mii_conv3 {
> > +       renesas,miic-input = <MIIC_SWITCH_PORTC>;
> > +       status = "okay";
> > +};
> > +
> > +&pinctrl{
> > +       pins_eth1: pins-eth1 {
> > +               pinmux = <RZN1_PINMUX(12, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
> > +                        <RZN1_PINMUX(13, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
> > +                        <RZN1_PINMUX(14, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
> > +                        <RZN1_PINMUX(15, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
> > +                        <RZN1_PINMUX(16, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
> > +                        <RZN1_PINMUX(17, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
> > +                        <RZN1_PINMUX(18, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
> > +                        <RZN1_PINMUX(19, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
> > +                        <RZN1_PINMUX(20, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
> > +                        <RZN1_PINMUX(21, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
> > +                        <RZN1_PINMUX(22, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
> > +                        <RZN1_PINMUX(23, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>;
> > +               drive-strength = <6>;
> > +               bias-disable;
> > +       };
> > +
> > +       pins_eth2: pins-eth2 {
> > +               pinmux = <RZN1_PINMUX(24, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
> > +                        <RZN1_PINMUX(25, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
> > +                        <RZN1_PINMUX(26, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
> > +                        <RZN1_PINMUX(27, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
> > +                        <RZN1_PINMUX(28, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
> > +                        <RZN1_PINMUX(29, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
> > +                        <RZN1_PINMUX(30, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
> > +                        <RZN1_PINMUX(31, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
> > +                        <RZN1_PINMUX(32, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
> > +                        <RZN1_PINMUX(33, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
> > +                        <RZN1_PINMUX(34, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>,
> > +                        <RZN1_PINMUX(35, RZN1_FUNC_CLK_ETH_MII_RGMII_RMII)>;
> > +               drive-strength = <6>;
> > +               bias-disable;
> > +       };
> > +};
> > +
> > +&switch {
> > +       pinctrl-names = "default";  
> 
> No need to specify pinctrl-names, as it is inherited from
> r9a06g032-rzn1d400-db.dts.

Acked.

> 
> > +       pinctrl-0 = <&pins_eth1>, <&pins_eth2>, <&pins_eth3>, <&pins_eth4>,
> > +                   <&pins_mdio1>;
> > +
> > +       mdio {
> > +               /* CN15 and CN16 switches must be configured in MDIO2 mode */
> > +               switch0phy1: ethernet-phy@1 {
> > +                       reg = <1>;
> > +                       marvell,reg-init = <3 16 0 0x1010>;  
> 
> marvell,reg-init is not documented in any DT bindings document?

Indeed, this is not somethiong that should be made available here. It's
only inverting the LED polarity but supported by some internal patch.
I'll remove that.


-- 
Clément Léger,
Embedded Linux and Kernel engineer at Bootlin
https://bootlin.com