* [PATCH v2 1/7] media: dt-bindings: i2c: samsung,s5k6a3: convert to dtschema
2023-02-14 10:45 [PATCH v2 0/7] media: dt-bindings: Convert Samsung SoC Camera to DT schema Krzysztof Kozlowski
@ 2023-02-14 10:45 ` Krzysztof Kozlowski
2023-02-15 20:46 ` Rob Herring
2023-02-14 10:45 ` [PATCH v2 2/7] media: dt-bindings: i2c: samsung,s5k5baf: " Krzysztof Kozlowski
` (5 subsequent siblings)
6 siblings, 1 reply; 16+ messages in thread
From: Krzysztof Kozlowski @ 2023-02-14 10:45 UTC (permalink / raw)
To: Mauro Carvalho Chehab, Rob Herring, Krzysztof Kozlowski,
Alim Akhtar, Sylwester Nawrocki, Andrzej Hajda, linux-media,
devicetree, linux-arm-kernel, linux-samsung-soc, linux-kernel
Cc: Krzysztof Kozlowski
Convert the Samsung S5K6A3(YX) raw image sensor bindings to DT schema.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
DTS is being fixed here:
https://lore.kernel.org/all/20230211134731.85957-3-krzysztof.kozlowski@linaro.org/
---
.../bindings/media/i2c/samsung,s5k6a3.yaml | 98 +++++++++++++++++++
.../bindings/media/samsung-s5k6a3.txt | 33 -------
2 files changed, 98 insertions(+), 33 deletions(-)
create mode 100644 Documentation/devicetree/bindings/media/i2c/samsung,s5k6a3.yaml
delete mode 100644 Documentation/devicetree/bindings/media/samsung-s5k6a3.txt
diff --git a/Documentation/devicetree/bindings/media/i2c/samsung,s5k6a3.yaml b/Documentation/devicetree/bindings/media/i2c/samsung,s5k6a3.yaml
new file mode 100644
index 000000000000..7e83a94124b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/samsung,s5k6a3.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/samsung,s5k6a3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5K6A3(YX) raw image sensor
+
+maintainers:
+ - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+ S5K6A3(YX) is a raw image sensor with MIPI CSI-2 and CCP2 image data
+ interfaces and CCI (I2C compatible) control bus.
+
+properties:
+ compatible:
+ const: samsung,s5k6a3
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: extclk
+
+ clock-frequency:
+ default: 24000000
+ description: extclk clock frequency
+
+ gpios:
+ maxItems: 1
+ description: GPIO connected to the RESET pin
+
+ afvdd-supply:
+ description: AF (actuator) voltage supply
+
+ svdda-supply:
+ description: Core voltage supply
+
+ svddio-supply:
+ description: I/O voltage supply
+
+ port:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ additionalProperties: false
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ items:
+ - const: 1
+
+required:
+ - compatible
+ - clocks
+ - clock-names
+ - gpios
+ - afvdd-supply
+ - svdda-supply
+ - svddio-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sensor@10 {
+ compatible = "samsung,s5k6a3";
+ reg = <0x10>;
+ clock-frequency = <24000000>;
+ clocks = <&camera 1>;
+ clock-names = "extclk";
+ gpios = <&gpm1 6 GPIO_ACTIVE_LOW>;
+ afvdd-supply = <&ldo19_reg>;
+ svdda-supply = <&cam_io_reg>;
+ svddio-supply = <&ldo19_reg>;
+
+ port {
+ endpoint {
+ remote-endpoint = <&csis1_ep>;
+ data-lanes = <1>;
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/media/samsung-s5k6a3.txt b/Documentation/devicetree/bindings/media/samsung-s5k6a3.txt
deleted file mode 100644
index cce01e82f3e3..000000000000
--- a/Documentation/devicetree/bindings/media/samsung-s5k6a3.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-Samsung S5K6A3(YX) raw image sensor
----------------------------------
-
-S5K6A3(YX) is a raw image sensor with MIPI CSI-2 and CCP2 image data interfaces
-and CCI (I2C compatible) control bus.
-
-Required properties:
-
-- compatible : "samsung,s5k6a3";
-- reg : I2C slave address of the sensor;
-- svdda-supply : core voltage supply;
-- svddio-supply : I/O voltage supply;
-- afvdd-supply : AF (actuator) voltage supply;
-- gpios : specifier of a GPIO connected to the RESET pin;
-- clocks : should contain list of phandle and clock specifier pairs
- according to common clock bindings for the clocks described
- in the clock-names property;
-- clock-names : should contain "extclk" entry for the sensor's EXTCLK clock;
-
-Optional properties:
-
-- clock-frequency : the frequency at which the "extclk" clock should be
- configured to operate, in Hz; if this property is not
- specified default 24 MHz value will be used.
-
-The common video interfaces bindings (see video-interfaces.txt) should be
-used to specify link to the image data receiver. The S5K6A3(YX) device
-node should contain one 'port' child node with an 'endpoint' subnode.
-
-Following properties are valid for the endpoint node:
-
-- data-lanes : (optional) specifies MIPI CSI-2 data lanes as covered in
- video-interfaces.txt. The sensor supports only one data lane.
--
2.34.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* Re: [PATCH v2 1/7] media: dt-bindings: i2c: samsung,s5k6a3: convert to dtschema
2023-02-14 10:45 ` [PATCH v2 1/7] media: dt-bindings: i2c: samsung,s5k6a3: convert to dtschema Krzysztof Kozlowski
@ 2023-02-15 20:46 ` Rob Herring
0 siblings, 0 replies; 16+ messages in thread
From: Rob Herring @ 2023-02-15 20:46 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: linux-media, Andrzej Hajda, Rob Herring, Krzysztof Kozlowski,
Mauro Carvalho Chehab, devicetree, linux-arm-kernel,
Sylwester Nawrocki, Alim Akhtar, linux-samsung-soc, linux-kernel
On Tue, 14 Feb 2023 11:45:02 +0100, Krzysztof Kozlowski wrote:
> Convert the Samsung S5K6A3(YX) raw image sensor bindings to DT schema.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>
> ---
>
> DTS is being fixed here:
> https://lore.kernel.org/all/20230211134731.85957-3-krzysztof.kozlowski@linaro.org/
> ---
> .../bindings/media/i2c/samsung,s5k6a3.yaml | 98 +++++++++++++++++++
> .../bindings/media/samsung-s5k6a3.txt | 33 -------
> 2 files changed, 98 insertions(+), 33 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/media/i2c/samsung,s5k6a3.yaml
> delete mode 100644 Documentation/devicetree/bindings/media/samsung-s5k6a3.txt
>
Reviewed-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH v2 2/7] media: dt-bindings: i2c: samsung,s5k5baf: convert to dtschema
2023-02-14 10:45 [PATCH v2 0/7] media: dt-bindings: Convert Samsung SoC Camera to DT schema Krzysztof Kozlowski
2023-02-14 10:45 ` [PATCH v2 1/7] media: dt-bindings: i2c: samsung,s5k6a3: convert to dtschema Krzysztof Kozlowski
@ 2023-02-14 10:45 ` Krzysztof Kozlowski
2023-02-15 20:47 ` Rob Herring
2023-02-14 10:45 ` [PATCH v2 3/7] media: dt-bindings: samsung,exynos4210-csis: " Krzysztof Kozlowski
` (4 subsequent siblings)
6 siblings, 1 reply; 16+ messages in thread
From: Krzysztof Kozlowski @ 2023-02-14 10:45 UTC (permalink / raw)
To: Mauro Carvalho Chehab, Rob Herring, Krzysztof Kozlowski,
Alim Akhtar, Sylwester Nawrocki, Andrzej Hajda, linux-media,
devicetree, linux-arm-kernel, linux-samsung-soc, linux-kernel
Cc: Krzysztof Kozlowski
Convert the Samsung S5K5BAF image sensor bindings to DT schema.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../bindings/media/i2c/samsung,s5k5baf.yaml | 101 ++++++++++++++++++
.../bindings/media/samsung-s5k5baf.txt | 58 ----------
2 files changed, 101 insertions(+), 58 deletions(-)
create mode 100644 Documentation/devicetree/bindings/media/i2c/samsung,s5k5baf.yaml
delete mode 100644 Documentation/devicetree/bindings/media/samsung-s5k5baf.txt
diff --git a/Documentation/devicetree/bindings/media/i2c/samsung,s5k5baf.yaml b/Documentation/devicetree/bindings/media/i2c/samsung,s5k5baf.yaml
new file mode 100644
index 000000000000..c8f2955e0825
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/samsung,s5k5baf.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/samsung,s5k5baf.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5K5BAF UXGA 1/5" 2M CMOS Image Sensor with embedded SoC ISP
+
+maintainers:
+ - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+properties:
+ compatible:
+ const: samsung,s5k5baf
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: mclk
+
+ clock-frequency:
+ default: 24000000
+ description: mclk clock frequency
+
+ rstn-gpios:
+ maxItems: 1
+ description: RSTN pin
+
+ stbyn-gpios:
+ maxItems: 1
+ description: STDBYN pin
+
+ vdda-supply:
+ description: Analog power supply 2.8V (2.6V to 3.0V)
+
+ vddio-supply:
+ description: I/O power supply 1.8V (1.65V to 1.95V) or 2.8V (2.5V to 3.1V)
+
+ vddreg-supply:
+ description:
+ Regulator input power supply 1.8V (1.7V to 1.9V) or 2.8V (2.6V to 3.0)
+
+ port:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ additionalProperties: false
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ items:
+ - const: 1
+
+required:
+ - compatible
+ - clocks
+ - clock-names
+ - rstn-gpios
+ - stbyn-gpios
+ - vdda-supply
+ - vddio-supply
+ - vddreg-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sensor@2d {
+ compatible = "samsung,s5k5baf";
+ reg = <0x2d>;
+ clocks = <&camera 0>;
+ clock-names = "mclk";
+ clock-frequency = <24000000>;
+ rstn-gpios = <&gpl2 1 GPIO_ACTIVE_LOW>;
+ stbyn-gpios = <&gpl2 0 GPIO_ACTIVE_LOW>;
+ vdda-supply = <&cam_io_en_reg>;
+ vddio-supply = <&vtcam_reg>;
+ vddreg-supply = <&vt_core_15v_reg>;
+
+ port {
+ endpoint {
+ remote-endpoint = <&csis1_ep>;
+ data-lanes = <1>;
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/media/samsung-s5k5baf.txt b/Documentation/devicetree/bindings/media/samsung-s5k5baf.txt
deleted file mode 100644
index 1f51e0439c96..000000000000
--- a/Documentation/devicetree/bindings/media/samsung-s5k5baf.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-Samsung S5K5BAF UXGA 1/5" 2M CMOS Image Sensor with embedded SoC ISP
---------------------------------------------------------------------
-
-Required properties:
-
-- compatible : "samsung,s5k5baf";
-- reg : I2C slave address of the sensor;
-- vdda-supply : analog power supply 2.8V (2.6V to 3.0V);
-- vddreg-supply : regulator input power supply 1.8V (1.7V to 1.9V)
- or 2.8V (2.6V to 3.0);
-- vddio-supply : I/O power supply 1.8V (1.65V to 1.95V)
- or 2.8V (2.5V to 3.1V);
-- stbyn-gpios : GPIO connected to STDBYN pin;
-- rstn-gpios : GPIO connected to RSTN pin;
-- clocks : list of phandle and clock specifier pairs
- according to common clock bindings for the
- clocks described in clock-names;
-- clock-names : should include "mclk" for the sensor's master clock;
-
-Optional properties:
-
-- clock-frequency : the frequency at which the "mclk" clock should be
- configured to operate, in Hz; if this property is not
- specified default 24 MHz value will be used.
-
-The device node should contain one 'port' child node with one child 'endpoint'
-node, according to the bindings defined in Documentation/devicetree/bindings/
-media/video-interfaces.txt. The following are properties specific to those
-nodes.
-
-endpoint node
--------------
-
-- data-lanes : (optional) specifies MIPI CSI-2 data lanes as covered in
- video-interfaces.txt. If present it should be <1> - the device
- supports only one data lane without re-mapping.
-
-Example:
-
-s5k5bafx@2d {
- compatible = "samsung,s5k5baf";
- reg = <0x2d>;
- vdda-supply = <&cam_io_en_reg>;
- vddreg-supply = <&vt_core_15v_reg>;
- vddio-supply = <&vtcam_reg>;
- stbyn-gpios = <&gpl2 0 1>;
- rstn-gpios = <&gpl2 1 1>;
- clock-names = "mclk";
- clocks = <&clock_cam 0>;
- clock-frequency = <24000000>;
-
- port {
- s5k5bafx_ep: endpoint {
- remote-endpoint = <&csis1_ep>;
- data-lanes = <1>;
- };
- };
-};
--
2.34.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* Re: [PATCH v2 2/7] media: dt-bindings: i2c: samsung,s5k5baf: convert to dtschema
2023-02-14 10:45 ` [PATCH v2 2/7] media: dt-bindings: i2c: samsung,s5k5baf: " Krzysztof Kozlowski
@ 2023-02-15 20:47 ` Rob Herring
0 siblings, 0 replies; 16+ messages in thread
From: Rob Herring @ 2023-02-15 20:47 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Andrzej Hajda, Alim Akhtar, Sylwester Nawrocki,
Krzysztof Kozlowski, Mauro Carvalho Chehab, Rob Herring,
linux-arm-kernel, linux-kernel, linux-media, linux-samsung-soc,
devicetree
On Tue, 14 Feb 2023 11:45:03 +0100, Krzysztof Kozlowski wrote:
> Convert the Samsung S5K5BAF image sensor bindings to DT schema.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
> .../bindings/media/i2c/samsung,s5k5baf.yaml | 101 ++++++++++++++++++
> .../bindings/media/samsung-s5k5baf.txt | 58 ----------
> 2 files changed, 101 insertions(+), 58 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/media/i2c/samsung,s5k5baf.yaml
> delete mode 100644 Documentation/devicetree/bindings/media/samsung-s5k5baf.txt
>
Reviewed-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH v2 3/7] media: dt-bindings: samsung,exynos4210-csis: convert to dtschema
2023-02-14 10:45 [PATCH v2 0/7] media: dt-bindings: Convert Samsung SoC Camera to DT schema Krzysztof Kozlowski
2023-02-14 10:45 ` [PATCH v2 1/7] media: dt-bindings: i2c: samsung,s5k6a3: convert to dtschema Krzysztof Kozlowski
2023-02-14 10:45 ` [PATCH v2 2/7] media: dt-bindings: i2c: samsung,s5k5baf: " Krzysztof Kozlowski
@ 2023-02-14 10:45 ` Krzysztof Kozlowski
2023-02-15 20:49 ` Rob Herring
2023-02-14 10:45 ` [PATCH v2 4/7] media: dt-bindings: samsung,exynos4212-fimc-lite: " Krzysztof Kozlowski
` (3 subsequent siblings)
6 siblings, 1 reply; 16+ messages in thread
From: Krzysztof Kozlowski @ 2023-02-14 10:45 UTC (permalink / raw)
To: Mauro Carvalho Chehab, Rob Herring, Krzysztof Kozlowski,
Alim Akhtar, Sylwester Nawrocki, Andrzej Hajda, linux-media,
devicetree, linux-arm-kernel, linux-samsung-soc, linux-kernel
Cc: Krzysztof Kozlowski
Convert the Samsung S5P/Exynos SoC series MIPI CSI-2 receiver (MIPI
CSIS) bindings to DT schema. Changes during conversion - adjust to
existing DTS and Linux driver:
1. Add phys and power-domains.
2. Move samsung,csis-wclk property to the endpoint node.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../media/samsung,exynos4210-csis.yaml | 170 ++++++++++++++++++
.../bindings/media/samsung-mipi-csis.txt | 81 ---------
MAINTAINERS | 1 +
3 files changed, 171 insertions(+), 81 deletions(-)
create mode 100644 Documentation/devicetree/bindings/media/samsung,exynos4210-csis.yaml
delete mode 100644 Documentation/devicetree/bindings/media/samsung-mipi-csis.txt
diff --git a/Documentation/devicetree/bindings/media/samsung,exynos4210-csis.yaml b/Documentation/devicetree/bindings/media/samsung,exynos4210-csis.yaml
new file mode 100644
index 000000000000..6e3f730f97ad
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/samsung,exynos4210-csis.yaml
@@ -0,0 +1,170 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/samsung,exynos4210-csis.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5P/Exynos SoC series MIPI CSI-2 receiver (MIPI CSIS)
+
+maintainers:
+ - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+ - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+properties:
+ compatible:
+ enum:
+ - samsung,s5pv210-csis
+ - samsung,exynos4210-csis
+ - samsung,exynos4212-csis
+ - samsung,exynos5250-csis
+
+ reg:
+ maxItems: 1
+
+ '#address-cells':
+ const: 1
+
+ bus-width:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [2, 4]
+ description:
+ Number of data lines supported.
+
+ clocks:
+ maxItems: 2
+
+ clock-names:
+ items:
+ - const: csis
+ - const: sclk_csis
+
+ clock-frequency:
+ default: 166000000
+ description:
+ The IP's main (system bus) clock frequency in Hz.
+
+ interrupts:
+ maxItems: 1
+
+ phys:
+ maxItems: 1
+
+ phy-names:
+ items:
+ - const: csis
+
+ power-domains:
+ maxItems: 1
+
+ '#size-cells':
+ const: 0
+
+ vddio-supply:
+ description: MIPI CSIS I/O and PLL voltage supply (e.g. 1.8V).
+
+ vddcore-supply:
+ description: MIPI CSIS Core voltage supply (e.g. 1.1V).
+
+patternProperties:
+ "^port@[34]$":
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ additionalProperties: false
+ description:
+ Camera input port.
+
+ properties:
+ reg:
+ enum: [3, 4]
+
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+
+ samsung,csis-hs-settle:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Differential receiver (HS-RX) settle time.
+
+ samsung,csis-wclk:
+ type: boolean
+ description:
+ CSI-2 wrapper clock selection. If this property is present external clock
+ from CMU will be used, or the bus clock if it's not specified.
+
+ required:
+ - data-lanes
+
+ required:
+ - reg
+
+required:
+ - compatible
+ - reg
+ - bus-width
+ - clocks
+ - clock-names
+ - interrupts
+ - vddio-supply
+ - vddcore-supply
+
+anyOf:
+ - required:
+ - port@3
+ - required:
+ - port@4
+
+allOf:
+ - if:
+ required:
+ - samsung,isp-wb
+ then:
+ required:
+ - samsung,sysreg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/exynos4.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ csis@11890000 {
+ compatible = "samsung,exynos4210-csis";
+ reg = <0x11890000 0x4000>;
+ clocks = <&clock CLK_CSIS1>,
+ <&clock CLK_SCLK_CSIS1>;
+ clock-names = "csis", "sclk_csis";
+ assigned-clocks = <&clock CLK_MOUT_CSIS1>,
+ <&clock CLK_SCLK_CSIS1>;
+ assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+ assigned-clock-rates = <0>, <176000000>;
+
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+
+ bus-width = <2>;
+ power-domains = <&pd_cam>;
+ phys = <&mipi_phy 2>;
+ phy-names = "csis";
+
+ vddcore-supply = <&ldo8_reg>;
+ vddio-supply = <&ldo10_reg>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Camera D (4) MIPI CSI-2 (CSIS1) */
+ port@4 {
+ reg = <4>;
+
+ endpoint {
+ remote-endpoint = <&is_s5k6a3_ep>;
+ data-lanes = <1>;
+ samsung,csis-hs-settle = <18>;
+ samsung,csis-wclk;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/media/samsung-mipi-csis.txt b/Documentation/devicetree/bindings/media/samsung-mipi-csis.txt
deleted file mode 100644
index a4149c9434ea..000000000000
--- a/Documentation/devicetree/bindings/media/samsung-mipi-csis.txt
+++ /dev/null
@@ -1,81 +0,0 @@
-Samsung S5P/Exynos SoC series MIPI CSI-2 receiver (MIPI CSIS)
--------------------------------------------------------------
-
-Required properties:
-
-- compatible : "samsung,s5pv210-csis" for S5PV210 (S5PC110),
- "samsung,exynos4210-csis" for Exynos4210 (S5PC210),
- "samsung,exynos4212-csis" for Exynos4212/Exynos4412,
- "samsung,exynos5250-csis" for Exynos5250;
-- reg : offset and length of the register set for the device;
-- interrupts : should contain MIPI CSIS interrupt; the format of the
- interrupt specifier depends on the interrupt controller;
-- bus-width : maximum number of data lanes supported (SoC specific);
-- vddio-supply : MIPI CSIS I/O and PLL voltage supply (e.g. 1.8V);
-- vddcore-supply : MIPI CSIS Core voltage supply (e.g. 1.1V);
-- clocks : list of clock specifiers, corresponding to entries in
- clock-names property;
-- clock-names : must contain "csis", "sclk_csis" entries, matching entries
- in the clocks property.
-
-Optional properties:
-
-- clock-frequency : The IP's main (system bus) clock frequency in Hz, default
- value when this property is not specified is 166 MHz;
-- samsung,csis-wclk : CSI-2 wrapper clock selection. If this property is present
- external clock from CMU will be used, or the bus clock if
- if it's not specified.
-
-The device node should contain one 'port' child node with one child 'endpoint'
-node, according to the bindings defined in Documentation/devicetree/bindings/
-media/video-interfaces.txt. The following are properties specific to those nodes.
-
-port node
----------
-
-- reg : (required) must be 3 for camera C input (CSIS0) or 4 for
- camera D input (CSIS1);
-
-endpoint node
--------------
-
-- data-lanes : (required) an array specifying active physical MIPI-CSI2
- data input lanes and their mapping to logical lanes; the
- array's content is unused, only its length is meaningful;
-
-- samsung,csis-hs-settle : (optional) differential receiver (HS-RX) settle time;
-
-
-Example:
-
- reg0: regulator@0 {
- };
-
- reg1: regulator@1 {
- };
-
-/* SoC properties */
-
- csis_0: csis@11880000 {
- compatible = "samsung,exynos4210-csis";
- reg = <0x11880000 0x1000>;
- interrupts = <0 78 0>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
-/* Board properties */
-
- csis_0: csis@11880000 {
- clock-frequency = <166000000>;
- vddio-supply = <®0>;
- vddcore-supply = <®1>;
- port {
- reg = <3>; /* 3 - CSIS0, 4 - CSIS1 */
- csis0_ep: endpoint {
- remote-endpoint = <...>;
- data-lanes = <1>, <2>;
- samsung,csis-hs-settle = <12>;
- };
- };
- };
diff --git a/MAINTAINERS b/MAINTAINERS
index 57d1d6ecb33d..0882e304c8f9 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -18465,6 +18465,7 @@ M: Sylwester Nawrocki <s.nawrocki@samsung.com>
L: linux-media@vger.kernel.org
S: Supported
Q: https://patchwork.linuxtv.org/project/linux-media/list/
+F: Documentation/devicetree/bindings/media/samsung,exynos4210-csis.yaml
F: drivers/media/platform/samsung/exynos4-is/
SAMSUNG SOC CLOCK DRIVERS
--
2.34.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* Re: [PATCH v2 3/7] media: dt-bindings: samsung,exynos4210-csis: convert to dtschema
2023-02-14 10:45 ` [PATCH v2 3/7] media: dt-bindings: samsung,exynos4210-csis: " Krzysztof Kozlowski
@ 2023-02-15 20:49 ` Rob Herring
0 siblings, 0 replies; 16+ messages in thread
From: Rob Herring @ 2023-02-15 20:49 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: linux-kernel, Sylwester Nawrocki, linux-samsung-soc,
linux-arm-kernel, Alim Akhtar, linux-media, Rob Herring,
devicetree, Andrzej Hajda, Mauro Carvalho Chehab,
Krzysztof Kozlowski
On Tue, 14 Feb 2023 11:45:04 +0100, Krzysztof Kozlowski wrote:
> Convert the Samsung S5P/Exynos SoC series MIPI CSI-2 receiver (MIPI
> CSIS) bindings to DT schema. Changes during conversion - adjust to
> existing DTS and Linux driver:
> 1. Add phys and power-domains.
> 2. Move samsung,csis-wclk property to the endpoint node.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
> .../media/samsung,exynos4210-csis.yaml | 170 ++++++++++++++++++
> .../bindings/media/samsung-mipi-csis.txt | 81 ---------
> MAINTAINERS | 1 +
> 3 files changed, 171 insertions(+), 81 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/media/samsung,exynos4210-csis.yaml
> delete mode 100644 Documentation/devicetree/bindings/media/samsung-mipi-csis.txt
>
Reviewed-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH v2 4/7] media: dt-bindings: samsung,exynos4212-fimc-lite: convert to dtschema
2023-02-14 10:45 [PATCH v2 0/7] media: dt-bindings: Convert Samsung SoC Camera to DT schema Krzysztof Kozlowski
` (2 preceding siblings ...)
2023-02-14 10:45 ` [PATCH v2 3/7] media: dt-bindings: samsung,exynos4210-csis: " Krzysztof Kozlowski
@ 2023-02-14 10:45 ` Krzysztof Kozlowski
2023-02-15 20:50 ` Rob Herring
2023-02-14 10:45 ` [PATCH v2 5/7] media: dt-bindings: samsung,exynos4212-is: " Krzysztof Kozlowski
` (2 subsequent siblings)
6 siblings, 1 reply; 16+ messages in thread
From: Krzysztof Kozlowski @ 2023-02-14 10:45 UTC (permalink / raw)
To: Mauro Carvalho Chehab, Rob Herring, Krzysztof Kozlowski,
Alim Akhtar, Sylwester Nawrocki, Andrzej Hajda, linux-media,
devicetree, linux-arm-kernel, linux-samsung-soc, linux-kernel
Cc: Krzysztof Kozlowski
Convert the Samsung Exynos SoC series camera host interface (FIMC-LITE)
bindings to DT schema. Changes during conversion - adjust to existing
DTS and Linux driver: add iommus and power-domains.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../bindings/media/exynos-fimc-lite.txt | 16 -----
.../media/samsung,exynos4212-fimc-lite.yaml | 63 +++++++++++++++++++
MAINTAINERS | 1 +
3 files changed, 64 insertions(+), 16 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/media/exynos-fimc-lite.txt
create mode 100644 Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-lite.yaml
diff --git a/Documentation/devicetree/bindings/media/exynos-fimc-lite.txt b/Documentation/devicetree/bindings/media/exynos-fimc-lite.txt
deleted file mode 100644
index 0bf6fb7fbeab..000000000000
--- a/Documentation/devicetree/bindings/media/exynos-fimc-lite.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-Exynos4x12/Exynos5 SoC series camera host interface (FIMC-LITE)
-
-Required properties:
-
-- compatible : should be one of:
- "samsung,exynos4212-fimc-lite" for Exynos4212/4412 SoCs,
- "samsung,exynos5250-fimc-lite" for Exynos5250 compatible
- devices;
-- reg : physical base address and size of the device memory mapped
- registers;
-- interrupts : should contain FIMC-LITE interrupt;
-- clocks : FIMC LITE gate clock should be specified in this property.
-- clock-names : should contain "flite" entry.
-
-Each FIMC device should have an alias in the aliases node, in the form of
-fimc-lite<n>, where <n> is an integer specifying the IP block instance.
diff --git a/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-lite.yaml b/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-lite.yaml
new file mode 100644
index 000000000000..f80eca0a4f41
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-lite.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/samsung,exynos4212-fimc-lite.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos SoC series camera host interface (FIMC-LITE)
+
+maintainers:
+ - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+ - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+description:
+ Each FIMC device should have an alias in the aliases node, in the form of
+ fimc-lite<n>, where <n> is an integer specifying the IP block instance.
+
+properties:
+ compatible:
+ enum:
+ - samsung,exynos4212-fimc-lite
+ - samsung,exynos5250-fimc-lite
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: flite
+
+ interrupts:
+ maxItems: 1
+
+ iommus:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/exynos4.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ fimc-lite@12390000 {
+ compatible = "samsung,exynos4212-fimc-lite";
+ reg = <0x12390000 0x1000>;
+ clocks = <&isp_clock CLK_ISP_FIMC_LITE0>;
+ clock-names = "flite";
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&pd_isp>;
+ iommus = <&sysmmu_fimc_lite0>;
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index 0882e304c8f9..2789c436c875 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -18466,6 +18466,7 @@ L: linux-media@vger.kernel.org
S: Supported
Q: https://patchwork.linuxtv.org/project/linux-media/list/
F: Documentation/devicetree/bindings/media/samsung,exynos4210-csis.yaml
+F: Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-lite.yaml
F: drivers/media/platform/samsung/exynos4-is/
SAMSUNG SOC CLOCK DRIVERS
--
2.34.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* Re: [PATCH v2 4/7] media: dt-bindings: samsung,exynos4212-fimc-lite: convert to dtschema
2023-02-14 10:45 ` [PATCH v2 4/7] media: dt-bindings: samsung,exynos4212-fimc-lite: " Krzysztof Kozlowski
@ 2023-02-15 20:50 ` Rob Herring
0 siblings, 0 replies; 16+ messages in thread
From: Rob Herring @ 2023-02-15 20:50 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Sylwester Nawrocki, linux-kernel, Mauro Carvalho Chehab,
devicetree, Andrzej Hajda, Krzysztof Kozlowski, linux-media,
Alim Akhtar, linux-samsung-soc, Rob Herring, linux-arm-kernel
On Tue, 14 Feb 2023 11:45:05 +0100, Krzysztof Kozlowski wrote:
> Convert the Samsung Exynos SoC series camera host interface (FIMC-LITE)
> bindings to DT schema. Changes during conversion - adjust to existing
> DTS and Linux driver: add iommus and power-domains.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
> .../bindings/media/exynos-fimc-lite.txt | 16 -----
> .../media/samsung,exynos4212-fimc-lite.yaml | 63 +++++++++++++++++++
> MAINTAINERS | 1 +
> 3 files changed, 64 insertions(+), 16 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/media/exynos-fimc-lite.txt
> create mode 100644 Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-lite.yaml
>
Reviewed-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH v2 5/7] media: dt-bindings: samsung,exynos4212-is: convert to dtschema
2023-02-14 10:45 [PATCH v2 0/7] media: dt-bindings: Convert Samsung SoC Camera to DT schema Krzysztof Kozlowski
` (3 preceding siblings ...)
2023-02-14 10:45 ` [PATCH v2 4/7] media: dt-bindings: samsung,exynos4212-fimc-lite: " Krzysztof Kozlowski
@ 2023-02-14 10:45 ` Krzysztof Kozlowski
2023-02-15 20:53 ` Rob Herring
2023-02-14 10:45 ` [PATCH v2 6/7] media: dt-bindings: samsung,fimc: " Krzysztof Kozlowski
2023-02-14 10:45 ` [PATCH v2 7/7] media: dt-bindings: samsung,s5c73m3: " Krzysztof Kozlowski
6 siblings, 1 reply; 16+ messages in thread
From: Krzysztof Kozlowski @ 2023-02-14 10:45 UTC (permalink / raw)
To: Mauro Carvalho Chehab, Rob Herring, Krzysztof Kozlowski,
Alim Akhtar, Sylwester Nawrocki, Andrzej Hajda, linux-media,
devicetree, linux-arm-kernel, linux-samsung-soc, linux-kernel
Cc: Krzysztof Kozlowski
Convert the Samsung Exynos4212/4412 SoC Imaging Subsystem (FIMC-IS)
bindings to DT schema. Changes during conversion - adjust to existing
DTS and Linux driver: add iommus and power-domains.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../bindings/media/exynos4-fimc-is.txt | 50 ----
.../media/samsung,exynos4212-fimc-is.yaml | 221 ++++++++++++++++++
MAINTAINERS | 1 +
3 files changed, 222 insertions(+), 50 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/media/exynos4-fimc-is.txt
create mode 100644 Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-is.yaml
diff --git a/Documentation/devicetree/bindings/media/exynos4-fimc-is.txt b/Documentation/devicetree/bindings/media/exynos4-fimc-is.txt
deleted file mode 100644
index 32ced99d4244..000000000000
--- a/Documentation/devicetree/bindings/media/exynos4-fimc-is.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-Exynos4x12 SoC series Imaging Subsystem (FIMC-IS)
-
-The FIMC-IS is a subsystem for processing image signal from an image sensor.
-The Exynos4x12 SoC series FIMC-IS V1.5 comprises of a dedicated ARM Cortex-A5
-processor, ISP, DRC and FD IP blocks and peripheral devices such as UART, I2C
-and SPI bus controllers, PWM and ADC.
-
-fimc-is node
-------------
-
-Required properties:
-- compatible : should be "samsung,exynos4212-fimc-is" for Exynos4212 and
- Exynos4412 SoCs;
-- reg : physical base address and length of the registers set;
-- interrupts : must contain two FIMC-IS interrupts, in order: ISP0, ISP1;
-- clocks : list of clock specifiers, corresponding to entries in
- clock-names property;
-- clock-names : must contain "ppmuispx", "ppmuispx", "lite0", "lite1"
- "mpll", "sysreg", "isp", "drc", "fd", "mcuisp", "gicisp",
- "pwm_isp", "mcuctl_isp", "uart", "ispdiv0", "ispdiv1",
- "mcuispdiv0", "mcuispdiv1", "aclk200", "div_aclk200",
- "aclk400mcuisp", "div_aclk400mcuisp" entries,
- matching entries in the clocks property.
-pmu subnode
------------
-
-Required properties:
- - reg : must contain PMU physical base address and size of the register set.
-
-The following are the FIMC-IS peripheral device nodes and can be specified
-either standalone or as the fimc-is node child nodes.
-
-i2c-isp (ISP I2C bus controller) nodes
-------------------------------------------
-
-Required properties:
-
-- compatible : should be "samsung,exynos4212-i2c-isp" for Exynos4212 and
- Exynos4412 SoCs;
-- reg : physical base address and length of the registers set;
-- clocks : must contain gate clock specifier for this controller;
-- clock-names : must contain "i2c_isp" entry.
-
-For the above nodes it is required to specify a pinctrl state named "default",
-according to the pinctrl bindings defined in ../pinctrl/pinctrl-bindings.txt.
-
-Device tree nodes of the image sensors' controlled directly by the FIMC-IS
-firmware must be child nodes of their corresponding ISP I2C bus controller node.
-The data link of these image sensors must be specified using the common video
-interfaces bindings, defined in video-interfaces.txt.
diff --git a/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-is.yaml b/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-is.yaml
new file mode 100644
index 000000000000..288f4bf3d44d
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-is.yaml
@@ -0,0 +1,221 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/samsung,exynos4212-fimc-is.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos4212/4412 SoC Imaging Subsystem (FIMC-IS)
+
+maintainers:
+ - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+ - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+description:
+ The FIMC-IS is a subsystem for processing image signal from an image sensor.
+ The Exynos4x12 SoC series FIMC-IS V1.5 comprises of a dedicated ARM Cortex-A5
+ processor, ISP, DRC and FD IP blocks and peripheral devices such as UART, I2C
+ and SPI bus controllers, PWM and ADC.
+
+properties:
+ compatible:
+ enum:
+ - samsung,exynos4212-fimc-is
+
+ reg:
+ maxItems: 1
+
+ '#address-cells':
+ const: 1
+
+ clocks:
+ maxItems: 21
+
+ clock-names:
+ items:
+ - const: lite0
+ - const: lite1
+ - const: ppmuispx
+ - const: ppmuispmx
+ - const: isp
+ - const: drc
+ - const: fd
+ - const: mcuisp
+ - const: gicisp
+ - const: mcuctl_isp
+ - const: pwm_isp
+ - const: ispdiv0
+ - const: ispdiv1
+ - const: mcuispdiv0
+ - const: mcuispdiv1
+ - const: mpll
+ - const: aclk200
+ - const: aclk400mcuisp
+ - const: div_aclk200
+ - const: div_aclk400mcuisp
+ - const: uart
+
+ interrupts:
+ maxItems: 2
+
+ iommus:
+ maxItems: 4
+
+ iommu-names:
+ items:
+ - const: isp
+ - const: drc
+ - const: fd
+ - const: mcuctl
+
+ power-domains:
+ maxItems: 1
+
+ ranges: true
+
+ '#size-cells':
+ const: 1
+
+patternProperties:
+ "^pmu@[0-9a-f]+$":
+ type: object
+ additionalProperties: false
+ description:
+ Node representing the SoC's Power Management Unit (duplicated with the
+ correct PMU node in the SoC).
+
+ properties:
+ reg:
+ maxItems: 1
+
+ required:
+ - reg
+
+ "^i2c-isp@[0-9a-f]+$":
+ type: object
+ $ref: /schemas/i2c/i2c-controller.yaml#
+ unevaluatedProperties: false
+ #additionalProperties: false
+ description:
+ ISP I2C bus controller
+
+ properties:
+ compatible:
+ const: samsung,exynos4212-i2c-isp
+
+ reg:
+ maxItems: 1
+
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: i2c_isp
+
+ pinctrl-0: true
+ pinctrl-names:
+ items:
+ - const: default
+
+ required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+
+required:
+ - compatible
+ - reg
+ - '#address-cells'
+ - clocks
+ - clock-names
+ - interrupts
+ - ranges
+ - '#size-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/exynos4.h>
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ fimc-is@12000000 {
+ compatible = "samsung,exynos4212-fimc-is";
+ reg = <0x12000000 0x260000>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&isp_clock CLK_ISP_FIMC_LITE0>,
+ <&isp_clock CLK_ISP_FIMC_LITE1>,
+ <&isp_clock CLK_ISP_PPMUISPX>,
+ <&isp_clock CLK_ISP_PPMUISPMX>,
+ <&isp_clock CLK_ISP_FIMC_ISP>,
+ <&isp_clock CLK_ISP_FIMC_DRC>,
+ <&isp_clock CLK_ISP_FIMC_FD>,
+ <&isp_clock CLK_ISP_MCUISP>,
+ <&isp_clock CLK_ISP_GICISP>,
+ <&isp_clock CLK_ISP_MCUCTL_ISP>,
+ <&isp_clock CLK_ISP_PWM_ISP>,
+ <&isp_clock CLK_ISP_DIV_ISP0>,
+ <&isp_clock CLK_ISP_DIV_ISP1>,
+ <&isp_clock CLK_ISP_DIV_MCUISP0>,
+ <&isp_clock CLK_ISP_DIV_MCUISP1>,
+ <&clock CLK_MOUT_MPLL_USER_T>,
+ <&clock CLK_ACLK200>,
+ <&clock CLK_ACLK400_MCUISP>,
+ <&clock CLK_DIV_ACLK200>,
+ <&clock CLK_DIV_ACLK400_MCUISP>,
+ <&clock CLK_UART_ISP_SCLK>;
+ clock-names = "lite0", "lite1", "ppmuispx",
+ "ppmuispmx", "isp",
+ "drc", "fd", "mcuisp",
+ "gicisp", "mcuctl_isp", "pwm_isp",
+ "ispdiv0", "ispdiv1", "mcuispdiv0",
+ "mcuispdiv1", "mpll", "aclk200",
+ "aclk400mcuisp", "div_aclk200",
+ "div_aclk400mcuisp", "uart";
+ iommus = <&sysmmu_fimc_isp>, <&sysmmu_fimc_drc>,
+ <&sysmmu_fimc_fd>, <&sysmmu_fimc_mcuctl>;
+ iommu-names = "isp", "drc", "fd", "mcuctl";
+ power-domains = <&pd_isp>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ pmu@10020000 {
+ reg = <0x10020000 0x3000>;
+ };
+
+ i2c-isp@12140000 {
+ compatible = "samsung,exynos4212-i2c-isp";
+ reg = <0x12140000 0x100>;
+ clocks = <&isp_clock CLK_ISP_I2C1_ISP>;
+ clock-names = "i2c_isp";
+ pinctrl-0 = <&fimc_is_i2c1>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ image-sensor@10 {
+ compatible = "samsung,s5k6a3";
+ reg = <0x10>;
+ svdda-supply = <&cam_io_reg>;
+ svddio-supply = <&ldo19_reg>;
+ afvdd-supply = <&ldo19_reg>;
+ clock-frequency = <24000000>;
+ clocks = <&camera 1>;
+ clock-names = "extclk";
+ gpios = <&gpm1 6 GPIO_ACTIVE_LOW>;
+
+ port {
+ endpoint {
+ remote-endpoint = <&csis1_ep>;
+ data-lanes = <1>;
+ };
+ };
+ };
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index 2789c436c875..0f22dc1c95ae 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -18466,6 +18466,7 @@ L: linux-media@vger.kernel.org
S: Supported
Q: https://patchwork.linuxtv.org/project/linux-media/list/
F: Documentation/devicetree/bindings/media/samsung,exynos4210-csis.yaml
+F: Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-is.yaml
F: Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-lite.yaml
F: drivers/media/platform/samsung/exynos4-is/
--
2.34.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* Re: [PATCH v2 5/7] media: dt-bindings: samsung,exynos4212-is: convert to dtschema
2023-02-14 10:45 ` [PATCH v2 5/7] media: dt-bindings: samsung,exynos4212-is: " Krzysztof Kozlowski
@ 2023-02-15 20:53 ` Rob Herring
2023-02-16 7:43 ` Krzysztof Kozlowski
0 siblings, 1 reply; 16+ messages in thread
From: Rob Herring @ 2023-02-15 20:53 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Mauro Carvalho Chehab, Krzysztof Kozlowski, Alim Akhtar,
Sylwester Nawrocki, Andrzej Hajda, linux-media, devicetree,
linux-arm-kernel, linux-samsung-soc, linux-kernel
On Tue, Feb 14, 2023 at 11:45:06AM +0100, Krzysztof Kozlowski wrote:
> Convert the Samsung Exynos4212/4412 SoC Imaging Subsystem (FIMC-IS)
> bindings to DT schema. Changes during conversion - adjust to existing
> DTS and Linux driver: add iommus and power-domains.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
> .../bindings/media/exynos4-fimc-is.txt | 50 ----
> .../media/samsung,exynos4212-fimc-is.yaml | 221 ++++++++++++++++++
> MAINTAINERS | 1 +
> 3 files changed, 222 insertions(+), 50 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/media/exynos4-fimc-is.txt
> create mode 100644 Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-is.yaml
>
> diff --git a/Documentation/devicetree/bindings/media/exynos4-fimc-is.txt b/Documentation/devicetree/bindings/media/exynos4-fimc-is.txt
> deleted file mode 100644
> index 32ced99d4244..000000000000
> --- a/Documentation/devicetree/bindings/media/exynos4-fimc-is.txt
> +++ /dev/null
> @@ -1,50 +0,0 @@
> -Exynos4x12 SoC series Imaging Subsystem (FIMC-IS)
> -
> -The FIMC-IS is a subsystem for processing image signal from an image sensor.
> -The Exynos4x12 SoC series FIMC-IS V1.5 comprises of a dedicated ARM Cortex-A5
> -processor, ISP, DRC and FD IP blocks and peripheral devices such as UART, I2C
> -and SPI bus controllers, PWM and ADC.
> -
> -fimc-is node
> -------------
> -
> -Required properties:
> -- compatible : should be "samsung,exynos4212-fimc-is" for Exynos4212 and
> - Exynos4412 SoCs;
> -- reg : physical base address and length of the registers set;
> -- interrupts : must contain two FIMC-IS interrupts, in order: ISP0, ISP1;
> -- clocks : list of clock specifiers, corresponding to entries in
> - clock-names property;
> -- clock-names : must contain "ppmuispx", "ppmuispx", "lite0", "lite1"
> - "mpll", "sysreg", "isp", "drc", "fd", "mcuisp", "gicisp",
> - "pwm_isp", "mcuctl_isp", "uart", "ispdiv0", "ispdiv1",
> - "mcuispdiv0", "mcuispdiv1", "aclk200", "div_aclk200",
> - "aclk400mcuisp", "div_aclk400mcuisp" entries,
> - matching entries in the clocks property.
> -pmu subnode
> ------------
> -
> -Required properties:
> - - reg : must contain PMU physical base address and size of the register set.
> -
> -The following are the FIMC-IS peripheral device nodes and can be specified
> -either standalone or as the fimc-is node child nodes.
> -
> -i2c-isp (ISP I2C bus controller) nodes
> -------------------------------------------
> -
> -Required properties:
> -
> -- compatible : should be "samsung,exynos4212-i2c-isp" for Exynos4212 and
> - Exynos4412 SoCs;
> -- reg : physical base address and length of the registers set;
> -- clocks : must contain gate clock specifier for this controller;
> -- clock-names : must contain "i2c_isp" entry.
> -
> -For the above nodes it is required to specify a pinctrl state named "default",
> -according to the pinctrl bindings defined in ../pinctrl/pinctrl-bindings.txt.
> -
> -Device tree nodes of the image sensors' controlled directly by the FIMC-IS
> -firmware must be child nodes of their corresponding ISP I2C bus controller node.
> -The data link of these image sensors must be specified using the common video
> -interfaces bindings, defined in video-interfaces.txt.
> diff --git a/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-is.yaml b/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-is.yaml
> new file mode 100644
> index 000000000000..288f4bf3d44d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-is.yaml
> @@ -0,0 +1,221 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/samsung,exynos4212-fimc-is.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Samsung Exynos4212/4412 SoC Imaging Subsystem (FIMC-IS)
> +
> +maintainers:
> + - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> + - Sylwester Nawrocki <s.nawrocki@samsung.com>
> +
> +description:
> + The FIMC-IS is a subsystem for processing image signal from an image sensor.
> + The Exynos4x12 SoC series FIMC-IS V1.5 comprises of a dedicated ARM Cortex-A5
> + processor, ISP, DRC and FD IP blocks and peripheral devices such as UART, I2C
> + and SPI bus controllers, PWM and ADC.
> +
> +properties:
> + compatible:
> + enum:
> + - samsung,exynos4212-fimc-is
> +
> + reg:
> + maxItems: 1
> +
> + '#address-cells':
> + const: 1
> +
> + clocks:
> + maxItems: 21
> +
> + clock-names:
> + items:
> + - const: lite0
> + - const: lite1
> + - const: ppmuispx
> + - const: ppmuispmx
> + - const: isp
> + - const: drc
> + - const: fd
> + - const: mcuisp
> + - const: gicisp
> + - const: mcuctl_isp
> + - const: pwm_isp
> + - const: ispdiv0
> + - const: ispdiv1
> + - const: mcuispdiv0
> + - const: mcuispdiv1
> + - const: mpll
> + - const: aclk200
> + - const: aclk400mcuisp
> + - const: div_aclk200
> + - const: div_aclk400mcuisp
> + - const: uart
> +
> + interrupts:
> + maxItems: 2
> +
> + iommus:
> + maxItems: 4
> +
> + iommu-names:
> + items:
> + - const: isp
> + - const: drc
> + - const: fd
> + - const: mcuctl
> +
> + power-domains:
> + maxItems: 1
> +
> + ranges: true
> +
> + '#size-cells':
> + const: 1
Normally this is next to #address-cells.
> +
> +patternProperties:
> + "^pmu@[0-9a-f]+$":
> + type: object
> + additionalProperties: false
> + description:
> + Node representing the SoC's Power Management Unit (duplicated with the
> + correct PMU node in the SoC).
> +
> + properties:
> + reg:
> + maxItems: 1
> +
> + required:
> + - reg
> +
> + "^i2c-isp@[0-9a-f]+$":
> + type: object
> + $ref: /schemas/i2c/i2c-controller.yaml#
> + unevaluatedProperties: false
> + #additionalProperties: false
??
> + description:
> + ISP I2C bus controller
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH v2 5/7] media: dt-bindings: samsung,exynos4212-is: convert to dtschema
2023-02-15 20:53 ` Rob Herring
@ 2023-02-16 7:43 ` Krzysztof Kozlowski
0 siblings, 0 replies; 16+ messages in thread
From: Krzysztof Kozlowski @ 2023-02-16 7:43 UTC (permalink / raw)
To: Rob Herring
Cc: Mauro Carvalho Chehab, Krzysztof Kozlowski, Alim Akhtar,
Sylwester Nawrocki, Andrzej Hajda, linux-media, devicetree,
linux-arm-kernel, linux-samsung-soc, linux-kernel
On 15/02/2023 21:53, Rob Herring wrote:
>> + power-domains:
>> + maxItems: 1
>> +
>> + ranges: true
>> +
>> + '#size-cells':
>> + const: 1
>
> Normally this is next to #address-cells.
I kept alphabetical sorting, but I can move this with ranges close to
the reg/address-cells.
>
>> +
>> +patternProperties:
>> + "^pmu@[0-9a-f]+$":
>> + type: object
>> + additionalProperties: false
>> + description:
>> + Node representing the SoC's Power Management Unit (duplicated with the
>> + correct PMU node in the SoC).
>> +
>> + properties:
>> + reg:
>> + maxItems: 1
>> +
>> + required:
>> + - reg
>> +
>> + "^i2c-isp@[0-9a-f]+$":
>> + type: object
>> + $ref: /schemas/i2c/i2c-controller.yaml#
>> + unevaluatedProperties: false
>> + #additionalProperties: false
>
> ??
Indeed, some debug code...
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH v2 6/7] media: dt-bindings: samsung,fimc: convert to dtschema
2023-02-14 10:45 [PATCH v2 0/7] media: dt-bindings: Convert Samsung SoC Camera to DT schema Krzysztof Kozlowski
` (4 preceding siblings ...)
2023-02-14 10:45 ` [PATCH v2 5/7] media: dt-bindings: samsung,exynos4212-is: " Krzysztof Kozlowski
@ 2023-02-14 10:45 ` Krzysztof Kozlowski
2023-02-15 20:59 ` Rob Herring
2023-02-14 10:45 ` [PATCH v2 7/7] media: dt-bindings: samsung,s5c73m3: " Krzysztof Kozlowski
6 siblings, 1 reply; 16+ messages in thread
From: Krzysztof Kozlowski @ 2023-02-14 10:45 UTC (permalink / raw)
To: Mauro Carvalho Chehab, Rob Herring, Krzysztof Kozlowski,
Alim Akhtar, Sylwester Nawrocki, Andrzej Hajda, linux-media,
devicetree, linux-arm-kernel, linux-samsung-soc, linux-kernel
Cc: Krzysztof Kozlowski
Convert the Samsung S5P/Exynos Camera Subsystem (FIMC) bindings to DT
schema. Changes during conversion - adjust to existing DTS and Linux
driver: add iommus and power-domains.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
The patch depends on:
https://lore.kernel.org/all/20230207205834.673163-1-krzysztof.kozlowski@linaro.org/
---
.../media/samsung,exynos4210-fimc.yaml | 152 ++++++++++
.../bindings/media/samsung,fimc.yaml | 279 ++++++++++++++++++
.../bindings/media/samsung-fimc.txt | 210 -------------
MAINTAINERS | 2 +
4 files changed, 433 insertions(+), 210 deletions(-)
create mode 100644 Documentation/devicetree/bindings/media/samsung,exynos4210-fimc.yaml
create mode 100644 Documentation/devicetree/bindings/media/samsung,fimc.yaml
delete mode 100644 Documentation/devicetree/bindings/media/samsung-fimc.txt
diff --git a/Documentation/devicetree/bindings/media/samsung,exynos4210-fimc.yaml b/Documentation/devicetree/bindings/media/samsung,exynos4210-fimc.yaml
new file mode 100644
index 000000000000..271d0577a83c
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/samsung,exynos4210-fimc.yaml
@@ -0,0 +1,152 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/samsung,exynos4210-fimc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5P/Exynos SoC Fully Integrated Mobile Camera
+
+maintainers:
+ - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+ - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+description:
+ Each FIMC device should have an alias in the aliases node, in the form of
+ fimc<n>, where <n> is an integer specifying the IP block instance.
+
+properties:
+ compatible:
+ enum:
+ - samsung,exynos4210-fimc
+ - samsung,exynos4212-fimc
+ - samsung,s5pv210-fimc
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 2
+
+ clock-names:
+ items:
+ - const: fimc
+ - const: sclk_fimc
+
+ clock-frequency:
+ description:
+ Maximum FIMC local clock (LCLK) frequency.
+
+ interrupts:
+ maxItems: 1
+
+ iommus:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ samsung,cam-if:
+ type: boolean
+ description:
+ The FIMC IP block includes the camera input interface.
+
+ samsung,isp-wb:
+ type: boolean
+ description: |
+ The FIMC IP block has the ISP writeback input.
+
+ samsung,lcd-wb:
+ type: boolean
+ description: |
+ The FIMC IP block has the LCD writeback input.
+
+ samsung,mainscaler-ext:
+ type: boolean
+ description:
+ FIMC IP supports extended image size and has CIEXTEN register.
+
+ samsung,min-pix-alignment:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ items:
+ - description: Minimum supported image height alignment.
+ - description: Horizontal image offset.
+ description:
+ The values are in pixels and default is <2 1>.
+
+ samsung,min-pix-sizes:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ maxItems: 2
+ description: |
+ An array specyfing minimum image size in pixels at the FIMC input and
+ output DMA, in the first and second cell respectively. Default value
+ is <16 16>.
+
+ samsung,pix-limits:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ maxItems: 4
+ description: |
+ An array of maximum supported image sizes in pixels, for details refer to
+ Table 2-1 in the S5PV210 SoC User Manual. The meaning of each cell is as
+ follows:
+ 0 - scaler input horizontal size
+ 1 - input horizontal size for the scaler bypassed
+ 2 - REAL_WIDTH without input rotation
+ 3 - REAL_HEIGHT with input rotation
+
+ samsung,rotators:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 0x11
+ description: |
+ A bitmask specifying whether this IP has the input and the output
+ rotator. Bits 4 and 0 correspond to input and output rotator
+ respectively. If a rotator is present its corresponding bit should be
+ set.
+
+ samsung,sysreg:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ System Registers (SYSREG) node.
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - samsung,pix-limits
+
+allOf:
+ - if:
+ required:
+ - samsung,isp-wb
+ then:
+ required:
+ - samsung,sysreg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/exynos4.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ fimc@11800000 {
+ compatible = "samsung,exynos4212-fimc";
+ reg = <0x11800000 0x1000>;
+ clocks = <&clock CLK_FIMC0>,
+ <&clock CLK_SCLK_FIMC0>;
+ clock-names = "fimc", "sclk_fimc";
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ iommus = <&sysmmu_fimc0>;
+ power-domains = <&pd_cam>;
+ samsung,sysreg = <&sys_reg>;
+
+ samsung,pix-limits = <4224 8192 1920 4224>;
+ samsung,mainscaler-ext;
+ samsung,isp-wb;
+ samsung,cam-if;
+
+ assigned-clocks = <&clock CLK_MOUT_FIMC0>,
+ <&clock CLK_SCLK_FIMC0>;
+ assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+ assigned-clock-rates = <0>, <176000000>;
+ };
diff --git a/Documentation/devicetree/bindings/media/samsung,fimc.yaml b/Documentation/devicetree/bindings/media/samsung,fimc.yaml
new file mode 100644
index 000000000000..8e3a81f819dd
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/samsung,fimc.yaml
@@ -0,0 +1,279 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/samsung,fimc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5P/Exynos SoC Camera Subsystem (FIMC)
+
+maintainers:
+ - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+ - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+description: |
+ The S5P/Exynos SoC Camera subsystem comprises of multiple sub-devices
+ represented by separate device tree nodes. Currently this includes: Fully
+ Integrated Mobile Camera (FIMC, in the S5P SoCs series known as CAMIF), MIPI
+ CSIS, FIMC-LITE and FIMC-IS (ISP).
+
+properties:
+ compatible:
+ const: samsung,fimc
+
+ '#address-cells':
+ const: 1
+
+ '#clock-cells':
+ const: 1
+ description: |
+ The clock specifier cell stores an index of a clock: 0, 1 for
+ CAM_A_CLKOUT, CAM_B_CLKOUT clocks respectively.
+
+ clocks:
+ minItems: 2
+ maxItems: 4
+
+ clock-names:
+ minItems: 2
+ items:
+ - const: sclk_cam0
+ - const: sclk_cam1
+ - const: pxl_async0
+ - const: pxl_async1
+
+ clock-output-names:
+ maxItems: 2
+
+ ranges: true
+
+ '#size-cells':
+ const: 1
+
+ parallel-ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description:
+ Active parallel video input ports.
+
+ patternProperties:
+ "^port@[01]$":
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ description:
+ Camera A and camera B inputs.
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ pinctrl-names:
+ minItems: 1
+ items:
+ - const: default
+ - const: idle
+ - const: active_a
+ - const: active_b
+
+patternProperties:
+ "^csis@[0-9a-f]+$":
+ type: object
+ $ref: samsung,exynos4210-csis.yaml#
+ description: MIPI CSI-2 receiver.
+
+ "^fimc@[0-9a-f]+$":
+ type: object
+ $ref: samsung,exynos4210-fimc.yaml#
+ description: Fully Integrated Mobile Camera.
+
+ "^fimc-is@[0-9a-f]+$":
+ type: object
+ $ref: samsung,exynos4212-fimc-is.yaml#
+ description: Imaging Subsystem (FIMC-IS).
+
+ "^fimc-lite@[0-9a-f]+$":
+ type: object
+ $ref: samsung,exynos4212-fimc-lite.yaml#
+ description: Camera host interface (FIMC-LITE).
+
+required:
+ - compatible
+ - '#address-cells'
+ - '#clock-cells'
+ - clocks
+ - clock-names
+ - clock-output-names
+ - ranges
+ - '#size-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/exynos4.h>
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ camera@11800000 {
+ compatible = "samsung,fimc";
+ #clock-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x18000000>;
+
+ clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>,
+ <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>;
+ clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
+ clock-output-names = "cam_a_clkout", "cam_b_clkout";
+
+ assigned-clocks = <&clock CLK_MOUT_CAM0>,
+ <&clock CLK_MOUT_CAM1>;
+ assigned-clock-parents = <&clock CLK_XUSBXTI>,
+ <&clock CLK_XUSBXTI>;
+
+ pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>;
+ pinctrl-names = "default";
+
+ fimc@11800000 {
+ compatible = "samsung,exynos4212-fimc";
+ reg = <0x11800000 0x1000>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clock CLK_FIMC0>,
+ <&clock CLK_SCLK_FIMC0>;
+ clock-names = "fimc", "sclk_fimc";
+ power-domains = <&pd_cam>;
+ samsung,sysreg = <&sys_reg>;
+ iommus = <&sysmmu_fimc0>;
+
+ samsung,pix-limits = <4224 8192 1920 4224>;
+ samsung,mainscaler-ext;
+ samsung,isp-wb;
+ samsung,cam-if;
+ };
+
+ /* ... FIMC 1-3 */
+
+ csis@11880000 {
+ compatible = "samsung,exynos4210-csis";
+ reg = <0x11880000 0x4000>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clock CLK_CSIS0>,
+ <&clock CLK_SCLK_CSIS0>;
+ clock-names = "csis", "sclk_csis";
+ assigned-clocks = <&clock CLK_MOUT_CSIS0>,
+ <&clock CLK_SCLK_CSIS0>;
+ assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+ assigned-clock-rates = <0>, <176000000>;
+
+ bus-width = <4>;
+ power-domains = <&pd_cam>;
+ phys = <&mipi_phy 0>;
+ phy-names = "csis";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vddcore-supply = <&ldo8_reg>;
+ vddio-supply = <&ldo10_reg>;
+
+ /* Camera C (3) MIPI CSI-2 (CSIS0) */
+ port@3 {
+ reg = <3>;
+ endpoint {
+ remote-endpoint = <&s5c73m3_ep>;
+ data-lanes = <1 2 3 4>;
+ samsung,csis-hs-settle = <12>;
+ };
+ };
+ };
+
+ /* ... CSIS 1 */
+
+ fimc-lite@12390000 {
+ compatible = "samsung,exynos4212-fimc-lite";
+ reg = <0x12390000 0x1000>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&pd_isp>;
+ clocks = <&isp_clock CLK_ISP_FIMC_LITE0>;
+ clock-names = "flite";
+ iommus = <&sysmmu_fimc_lite0>;
+ };
+
+ /* ... FIMC-LITE 1 */
+
+ fimc-is@12000000 {
+ compatible = "samsung,exynos4212-fimc-is";
+ reg = <0x12000000 0x260000>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&isp_clock CLK_ISP_FIMC_LITE0>,
+ <&isp_clock CLK_ISP_FIMC_LITE1>,
+ <&isp_clock CLK_ISP_PPMUISPX>,
+ <&isp_clock CLK_ISP_PPMUISPMX>,
+ <&isp_clock CLK_ISP_FIMC_ISP>,
+ <&isp_clock CLK_ISP_FIMC_DRC>,
+ <&isp_clock CLK_ISP_FIMC_FD>,
+ <&isp_clock CLK_ISP_MCUISP>,
+ <&isp_clock CLK_ISP_GICISP>,
+ <&isp_clock CLK_ISP_MCUCTL_ISP>,
+ <&isp_clock CLK_ISP_PWM_ISP>,
+ <&isp_clock CLK_ISP_DIV_ISP0>,
+ <&isp_clock CLK_ISP_DIV_ISP1>,
+ <&isp_clock CLK_ISP_DIV_MCUISP0>,
+ <&isp_clock CLK_ISP_DIV_MCUISP1>,
+ <&clock CLK_MOUT_MPLL_USER_T>,
+ <&clock CLK_ACLK200>,
+ <&clock CLK_ACLK400_MCUISP>,
+ <&clock CLK_DIV_ACLK200>,
+ <&clock CLK_DIV_ACLK400_MCUISP>,
+ <&clock CLK_UART_ISP_SCLK>;
+ clock-names = "lite0", "lite1", "ppmuispx",
+ "ppmuispmx", "isp",
+ "drc", "fd", "mcuisp",
+ "gicisp", "mcuctl_isp", "pwm_isp",
+ "ispdiv0", "ispdiv1", "mcuispdiv0",
+ "mcuispdiv1", "mpll", "aclk200",
+ "aclk400mcuisp", "div_aclk200",
+ "div_aclk400mcuisp", "uart";
+ iommus = <&sysmmu_fimc_isp>, <&sysmmu_fimc_drc>,
+ <&sysmmu_fimc_fd>, <&sysmmu_fimc_mcuctl>;
+ iommu-names = "isp", "drc", "fd", "mcuctl";
+ power-domains = <&pd_isp>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ pmu@10020000 {
+ reg = <0x10020000 0x3000>;
+ };
+
+ i2c-isp@12140000 {
+ compatible = "samsung,exynos4212-i2c-isp";
+ reg = <0x12140000 0x100>;
+ clocks = <&isp_clock CLK_ISP_I2C1_ISP>;
+ clock-names = "i2c_isp";
+ pinctrl-0 = <&fimc_is_i2c1>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ image-sensor@10 {
+ compatible = "samsung,s5k6a3";
+ reg = <0x10>;
+ svdda-supply = <&cam_io_reg>;
+ svddio-supply = <&ldo19_reg>;
+ afvdd-supply = <&ldo19_reg>;
+ clock-frequency = <24000000>;
+ /* CAM_B_CLKOUT */
+ clocks = <&camera 1>;
+ clock-names = "extclk";
+ gpios = <&gpm1 6 GPIO_ACTIVE_LOW>;
+
+ port {
+ endpoint {
+ remote-endpoint = <&csis1_ep>;
+ data-lanes = <1>;
+ };
+ };
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/media/samsung-fimc.txt b/Documentation/devicetree/bindings/media/samsung-fimc.txt
deleted file mode 100644
index f90267f1180e..000000000000
--- a/Documentation/devicetree/bindings/media/samsung-fimc.txt
+++ /dev/null
@@ -1,210 +0,0 @@
-Samsung S5P/Exynos SoC Camera Subsystem (FIMC)
-----------------------------------------------
-
-The S5P/Exynos SoC Camera subsystem comprises of multiple sub-devices
-represented by separate device tree nodes. Currently this includes: FIMC (in
-the S5P SoCs series known as CAMIF), MIPI CSIS, FIMC-LITE and FIMC-IS (ISP).
-
-The sub-subdevices are defined as child nodes of the common 'camera' node which
-also includes common properties of the whole subsystem not really specific to
-any single sub-device, like common camera port pins or the CAMCLK clock outputs
-for external image sensors attached to an SoC.
-
-Common 'camera' node
---------------------
-
-Required properties:
-
-- compatible: must be "samsung,fimc"
-- clocks: list of clock specifiers, corresponding to entries in
- the clock-names property;
-- clock-names : must contain "sclk_cam0", "sclk_cam1", "pxl_async0",
- "pxl_async1" entries, matching entries in the clocks property.
-
-- #clock-cells: from the common clock bindings (../clock/clock-bindings.txt),
- must be 1. A clock provider is associated with the 'camera' node and it should
- be referenced by external sensors that use clocks provided by the SoC on
- CAM_*_CLKOUT pins. The clock specifier cell stores an index of a clock.
- The indices are 0, 1 for CAM_A_CLKOUT, CAM_B_CLKOUT clocks respectively.
-
-- clock-output-names: from the common clock bindings, should contain names of
- clocks registered by the camera subsystem corresponding to CAM_A_CLKOUT,
- CAM_B_CLKOUT output clocks respectively.
-
-The pinctrl bindings defined in ../pinctrl/pinctrl-bindings.txt must be used
-to define a required pinctrl state named "default" and optional pinctrl states:
-"idle", "active-a", active-b". These optional states can be used to switch the
-camera port pinmux at runtime. The "idle" state should configure both the camera
-ports A and B into high impedance state, especially the CAMCLK clock output
-should be inactive. For the "active-a" state the camera port A must be activated
-and the port B deactivated and for the state "active-b" it should be the other
-way around.
-
-The 'camera' node must include at least one 'fimc' child node.
-
-
-'fimc' device nodes
--------------------
-
-Required properties:
-
-- compatible: "samsung,s5pv210-fimc" for S5PV210, "samsung,exynos4210-fimc"
- for Exynos4210 and "samsung,exynos4212-fimc" for Exynos4x12 SoCs;
-- reg: physical base address and length of the registers set for the device;
-- interrupts: should contain FIMC interrupt;
-- clocks: list of clock specifiers, must contain an entry for each required
- entry in clock-names;
-- clock-names: must contain "fimc", "sclk_fimc" entries.
-- samsung,pix-limits: an array of maximum supported image sizes in pixels, for
- details refer to Table 2-1 in the S5PV210 SoC User Manual; The meaning of
- each cell is as follows:
- 0 - scaler input horizontal size,
- 1 - input horizontal size for the scaler bypassed,
- 2 - REAL_WIDTH without input rotation,
- 3 - REAL_HEIGHT with input rotation,
-- samsung,sysreg: a phandle to the SYSREG node.
-
-Each FIMC device should have an alias in the aliases node, in the form of
-fimc<n>, where <n> is an integer specifying the IP block instance.
-
-Optional properties:
-
-- clock-frequency: maximum FIMC local clock (LCLK) frequency;
-- samsung,min-pix-sizes: an array specyfing minimum image size in pixels at
- the FIMC input and output DMA, in the first and second cell respectively.
- Default value when this property is not present is <16 16>;
-- samsung,min-pix-alignment: minimum supported image height alignment (first
- cell) and the horizontal image offset (second cell). The values are in pixels
- and default to <2 1> when this property is not present;
-- samsung,mainscaler-ext: a boolean property indicating whether the FIMC IP
- supports extended image size and has CIEXTEN register;
-- samsung,rotators: a bitmask specifying whether this IP has the input and
- the output rotator. Bits 4 and 0 correspond to input and output rotator
- respectively. If a rotator is present its corresponding bit should be set.
- Default value when this property is not specified is 0x11.
-- samsung,cam-if: a bolean property indicating whether the IP block includes
- the camera input interface.
-- samsung,isp-wb: this property must be present if the IP block has the ISP
- writeback input.
-- samsung,lcd-wb: this property must be present if the IP block has the LCD
- writeback input.
-
-
-'parallel-ports' node
----------------------
-
-This node should contain child 'port' nodes specifying active parallel video
-input ports. It includes camera A and camera B inputs. 'reg' property in the
-port nodes specifies data input - 1, 2 indicates input A, B respectively.
-
-Optional properties
-
-- samsung,camclk-out (deprecated) : specifies clock output for remote sensor,
- 0 - CAM_A_CLKOUT, 1 - CAM_B_CLKOUT;
-
-Image sensor nodes
-------------------
-
-The sensor device nodes should be added to their control bus controller (e.g.
-I2C0) nodes and linked to a port node in the csis or the parallel-ports node,
-using the common video interfaces bindings, defined in video-interfaces.txt.
-
-Example:
-
- aliases {
- fimc0 = &fimc_0;
- };
-
- /* Parallel bus IF sensor */
- i2c_0: i2c@13860000 {
- s5k6aa: sensor@3c {
- compatible = "samsung,s5k6aafx";
- reg = <0x3c>;
- vddio-supply = <...>;
-
- clock-frequency = <24000000>;
- clocks = <&camera 1>;
- clock-names = "mclk";
-
- port {
- s5k6aa_ep: endpoint {
- remote-endpoint = <&fimc0_ep>;
- bus-width = <8>;
- hsync-active = <0>;
- vsync-active = <1>;
- pclk-sample = <1>;
- };
- };
- };
-
- /* MIPI CSI-2 bus IF sensor */
- s5c73m3: sensor@1a {
- compatible = "samsung,s5c73m3";
- reg = <0x1a>;
- vddio-supply = <...>;
-
- clock-frequency = <24000000>;
- clocks = <&camera 0>;
- clock-names = "mclk";
-
- port {
- s5c73m3_1: endpoint {
- data-lanes = <1 2 3 4>;
- remote-endpoint = <&csis0_ep>;
- };
- };
- };
- };
-
- camera@11800000 {
- compatible = "samsung,fimc";
- clocks = <&clock 132>, <&clock 133>, <&clock 351>,
- <&clock 352>;
- clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0",
- "pxl_async1";
- #clock-cells = <1>;
- clock-output-names = "cam_a_clkout", "cam_b_clkout";
- pinctrl-names = "default";
- pinctrl-0 = <&cam_port_a_clk_active>;
- ranges;
- #address-cells = <1>;
- #size-cells = <1>;
-
- /* parallel camera ports */
- parallel-ports {
- /* camera A input */
- port@1 {
- reg = <1>;
- fimc0_ep: endpoint {
- remote-endpoint = <&s5k6aa_ep>;
- bus-width = <8>;
- hsync-active = <0>;
- vsync-active = <1>;
- pclk-sample = <1>;
- };
- };
- };
-
- fimc_0: fimc@11800000 {
- compatible = "samsung,exynos4210-fimc";
- reg = <0x11800000 0x1000>;
- interrupts = <0 85 0>;
- };
-
- csis_0: csis@11880000 {
- compatible = "samsung,exynos4210-csis";
- reg = <0x11880000 0x1000>;
- interrupts = <0 78 0>;
- /* camera C input */
- port@3 {
- reg = <3>;
- csis0_ep: endpoint {
- remote-endpoint = <&s5c73m3_ep>;
- data-lanes = <1 2 3 4>;
- samsung,csis-hs-settle = <12>;
- };
- };
- };
- };
-
-The MIPI-CSIS device binding is defined in samsung-mipi-csis.txt.
diff --git a/MAINTAINERS b/MAINTAINERS
index 0f22dc1c95ae..87140ebb9a40 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -18466,8 +18466,10 @@ L: linux-media@vger.kernel.org
S: Supported
Q: https://patchwork.linuxtv.org/project/linux-media/list/
F: Documentation/devicetree/bindings/media/samsung,exynos4210-csis.yaml
+F: Documentation/devicetree/bindings/media/samsung,exynos4210-fimc.yaml
F: Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-is.yaml
F: Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-lite.yaml
+F: Documentation/devicetree/bindings/media/samsung,fimc.yaml
F: drivers/media/platform/samsung/exynos4-is/
SAMSUNG SOC CLOCK DRIVERS
--
2.34.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* Re: [PATCH v2 6/7] media: dt-bindings: samsung,fimc: convert to dtschema
2023-02-14 10:45 ` [PATCH v2 6/7] media: dt-bindings: samsung,fimc: " Krzysztof Kozlowski
@ 2023-02-15 20:59 ` Rob Herring
0 siblings, 0 replies; 16+ messages in thread
From: Rob Herring @ 2023-02-15 20:59 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Alim Akhtar, Rob Herring, Mauro Carvalho Chehab,
linux-samsung-soc, linux-media, devicetree, linux-kernel,
Krzysztof Kozlowski, Andrzej Hajda, linux-arm-kernel,
Sylwester Nawrocki
On Tue, 14 Feb 2023 11:45:07 +0100, Krzysztof Kozlowski wrote:
> Convert the Samsung S5P/Exynos Camera Subsystem (FIMC) bindings to DT
> schema. Changes during conversion - adjust to existing DTS and Linux
> driver: add iommus and power-domains.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>
> ---
>
> The patch depends on:
> https://lore.kernel.org/all/20230207205834.673163-1-krzysztof.kozlowski@linaro.org/
> ---
> .../media/samsung,exynos4210-fimc.yaml | 152 ++++++++++
> .../bindings/media/samsung,fimc.yaml | 279 ++++++++++++++++++
> .../bindings/media/samsung-fimc.txt | 210 -------------
> MAINTAINERS | 2 +
> 4 files changed, 433 insertions(+), 210 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/media/samsung,exynos4210-fimc.yaml
> create mode 100644 Documentation/devicetree/bindings/media/samsung,fimc.yaml
> delete mode 100644 Documentation/devicetree/bindings/media/samsung-fimc.txt
>
Reviewed-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH v2 7/7] media: dt-bindings: samsung,s5c73m3: convert to dtschema
2023-02-14 10:45 [PATCH v2 0/7] media: dt-bindings: Convert Samsung SoC Camera to DT schema Krzysztof Kozlowski
` (5 preceding siblings ...)
2023-02-14 10:45 ` [PATCH v2 6/7] media: dt-bindings: samsung,fimc: " Krzysztof Kozlowski
@ 2023-02-14 10:45 ` Krzysztof Kozlowski
2023-02-15 21:00 ` Rob Herring
6 siblings, 1 reply; 16+ messages in thread
From: Krzysztof Kozlowski @ 2023-02-14 10:45 UTC (permalink / raw)
To: Mauro Carvalho Chehab, Rob Herring, Krzysztof Kozlowski,
Alim Akhtar, Sylwester Nawrocki, Andrzej Hajda, linux-media,
devicetree, linux-arm-kernel, linux-samsung-soc, linux-kernel
Cc: Krzysztof Kozlowski
Convert the Samsung S5C73M3 8Mp camera ISP bindings to DT schema.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../bindings/media/samsung,s5c73m3.yaml | 165 ++++++++++++++++++
.../bindings/media/samsung-s5c73m3.txt | 97 ----------
MAINTAINERS | 1 +
3 files changed, 166 insertions(+), 97 deletions(-)
create mode 100644 Documentation/devicetree/bindings/media/samsung,s5c73m3.yaml
delete mode 100644 Documentation/devicetree/bindings/media/samsung-s5c73m3.txt
diff --git a/Documentation/devicetree/bindings/media/samsung,s5c73m3.yaml b/Documentation/devicetree/bindings/media/samsung,s5c73m3.yaml
new file mode 100644
index 000000000000..1b75390fdaac
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/samsung,s5c73m3.yaml
@@ -0,0 +1,165 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/samsung,s5c73m3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5C73M3 8Mp camera ISP
+
+maintainers:
+ - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+ - Sylwester Nawrocki <s.nawrocki@samsung.com>
+
+description:
+ The S5C73M3 camera ISP supports MIPI CSI-2 and parallel (ITU-R BT.656)
+ video data busses. The I2C bus is the main control bus and additionally the
+ SPI bus is used, mostly for transferring the firmware to and from the
+ device. Two slave device nodes corresponding to these control bus
+ interfaces are required and should be placed under respective bus
+ controller nodes.
+
+properties:
+ compatible:
+ const: samsung,s5c73m3
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: cis_extclk
+
+ clock-frequency:
+ default: 24000000
+ description: cis_extclk clock frequency.
+
+ standby-gpios:
+ maxItems: 1
+ description: STANDBY pin.
+
+ vdda-supply:
+ description: Analog power supply (1.2V).
+
+ vdd-af-supply:
+ description: lens power supply (2.8V).
+
+ vddio-cis-supply:
+ description: CIS I/O power supply (1.2V to 1.8V).
+
+ vddio-host-supply:
+ description: Host I/O power supply (1.8V to 2.8V).
+
+ vdd-int-supply:
+ description: Digital power supply (1.2V).
+
+ vdd-reg-supply:
+ description: Regulator input power supply (2.8V).
+
+ xshutdown-gpios:
+ maxItems: 1
+ description: XSHUTDOWN pin.
+
+ port:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ additionalProperties: false
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ items:
+ - const: 1
+ - const: 2
+ - const: 3
+ - const: 4
+
+required:
+ - compatible
+ - reg
+
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+ - if:
+ required:
+ - spi-max-frequency
+ then:
+ properties:
+ # The SPI node is simplified firmware-transfer interface only
+ clocks: false
+ clock-names: false
+ standby-gpios: false
+ vdda-supply: false
+ vdd-af-supply: false
+ vddio-cis-supply: false
+ vddio-host-supply: false
+ vdd-int-supply: false
+ vdd-reg-supply: false
+ xshutdown-gpios: false
+ port: false
+ else:
+ required:
+ - clocks
+ - clock-names
+ - standby-gpios
+ - vdda-supply
+ - vdd-af-supply
+ - vddio-cis-supply
+ - vddio-host-supply
+ - vdd-int-supply
+ - vdd-reg-supply
+ - xshutdown-gpios
+ - port
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ image-sensor@3c {
+ compatible = "samsung,s5c73m3";
+ reg = <0x3c>;
+ clock-frequency = <24000000>;
+ clocks = <&camera 0>;
+ clock-names = "cis_extclk";
+ standby-gpios = <&gpm0 6 GPIO_ACTIVE_LOW>;
+ vdda-supply = <&cam_vdda_reg>;
+ vdd-af-supply = <&cam_af_reg>;
+ vddio-cis-supply = <&ldo9_reg>;
+ vddio-host-supply = <&ldo18_reg>;
+ vdd-int-supply = <&buck9_reg>;
+ vdd-reg-supply = <&cam_io_reg>;
+ xshutdown-gpios = <&gpf1 3 GPIO_ACTIVE_LOW>; /* ISP_RESET */
+
+ port {
+ s5c73m3_ep: endpoint {
+ remote-endpoint = <&csis0_ep>;
+ data-lanes = <1 2 3 4>;
+ };
+ };
+ };
+ };
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ image-sensor@0 {
+ compatible = "samsung,s5c73m3";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ controller-data {
+ samsung,spi-feedback-delay = <2>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/media/samsung-s5c73m3.txt b/Documentation/devicetree/bindings/media/samsung-s5c73m3.txt
deleted file mode 100644
index f0ea9adad442..000000000000
--- a/Documentation/devicetree/bindings/media/samsung-s5c73m3.txt
+++ /dev/null
@@ -1,97 +0,0 @@
-Samsung S5C73M3 8Mp camera ISP
-------------------------------
-
-The S5C73M3 camera ISP supports MIPI CSI-2 and parallel (ITU-R BT.656) video
-data busses. The I2C bus is the main control bus and additionally the SPI bus
-is used, mostly for transferring the firmware to and from the device. Two
-slave device nodes corresponding to these control bus interfaces are required
-and should be placed under respective bus controller nodes.
-
-I2C slave device node
----------------------
-
-Required properties:
-
-- compatible : "samsung,s5c73m3";
-- reg : I2C slave address of the sensor;
-- vdd-int-supply : digital power supply (1.2V);
-- vdda-supply : analog power supply (1.2V);
-- vdd-reg-supply : regulator input power supply (2.8V);
-- vddio-host-supply : host I/O power supply (1.8V to 2.8V);
-- vddio-cis-supply : CIS I/O power supply (1.2V to 1.8V);
-- vdd-af-supply : lens power supply (2.8V);
-- xshutdown-gpios : specifier of GPIO connected to the XSHUTDOWN pin;
-- standby-gpios : specifier of GPIO connected to the STANDBY pin;
-- clocks : should contain list of phandle and clock specifier pairs
- according to common clock bindings for the clocks described
- in the clock-names property;
-- clock-names : should contain "cis_extclk" entry for the CIS_EXTCLK clock;
-
-Optional properties:
-
-- clock-frequency : the frequency at which the "cis_extclk" clock should be
- configured to operate, in Hz; if this property is not
- specified default 24 MHz value will be used.
-
-The common video interfaces bindings (see video-interfaces.txt) should be used
-to specify link from the S5C73M3 to an external image data receiver. The S5C73M3
-device node should contain one 'port' child node with an 'endpoint' subnode for
-this purpose. The data link from a raw image sensor to the S5C73M3 can be
-similarly specified, but it is optional since the S5C73M3 ISP and a raw image
-sensor are usually inseparable and form a hybrid module.
-
-Following properties are valid for the endpoint node(s):
-
-endpoint subnode
-----------------
-
-- data-lanes : (optional) specifies MIPI CSI-2 data lanes as covered in
- video-interfaces.txt. This sensor doesn't support data lane remapping
- and physical lane indexes in subsequent elements of the array should
- be only consecutive ascending values.
-
-SPI device node
----------------
-
-Required properties:
-
-- compatible : "samsung,s5c73m3";
-
-For more details see description of the SPI busses bindings
-(../spi/spi-bus.txt) and bindings of a specific bus controller.
-
-Example:
-
-i2c@138a000000 {
- ...
- s5c73m3@3c {
- compatible = "samsung,s5c73m3";
- reg = <0x3c>;
- vdd-int-supply = <&buck9_reg>;
- vdda-supply = <&ldo17_reg>;
- vdd-reg-supply = <&cam_io_reg>;
- vddio-host-supply = <&ldo18_reg>;
- vddio-cis-supply = <&ldo9_reg>;
- vdd-af-supply = <&cam_af_reg>;
- clock-frequency = <24000000>;
- clocks = <&clk 0>;
- clock-names = "cis_extclk";
- xshutdown-gpios = <&gpf1 3 1>;
- standby-gpios = <&gpm0 1 1>;
- port {
- s5c73m3_ep: endpoint {
- remote-endpoint = <&csis0_ep>;
- data-lanes = <1 2 3 4>;
- };
- };
- };
-};
-
-spi@1392000 {
- ...
- s5c73m3_spi: s5c73m3@0 {
- compatible = "samsung,s5c73m3";
- reg = <0>;
- ...
- };
-};
diff --git a/MAINTAINERS b/MAINTAINERS
index 87140ebb9a40..9bb777760964 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -18441,6 +18441,7 @@ M: Sylwester Nawrocki <s.nawrocki@samsung.com>
M: Andrzej Hajda <andrzej.hajda@intel.com>
L: linux-media@vger.kernel.org
S: Supported
+F: Documentation/devicetree/bindings/media/samsung,s5c73m3.yaml
F: drivers/media/i2c/s5c73m3/*
SAMSUNG S5K5BAF CAMERA DRIVER
--
2.34.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* Re: [PATCH v2 7/7] media: dt-bindings: samsung,s5c73m3: convert to dtschema
2023-02-14 10:45 ` [PATCH v2 7/7] media: dt-bindings: samsung,s5c73m3: " Krzysztof Kozlowski
@ 2023-02-15 21:00 ` Rob Herring
0 siblings, 0 replies; 16+ messages in thread
From: Rob Herring @ 2023-02-15 21:00 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: linux-kernel, Mauro Carvalho Chehab, Alim Akhtar,
Krzysztof Kozlowski, Andrzej Hajda, linux-media,
linux-samsung-soc, Sylwester Nawrocki, Rob Herring,
linux-arm-kernel, devicetree
On Tue, 14 Feb 2023 11:45:08 +0100, Krzysztof Kozlowski wrote:
> Convert the Samsung S5C73M3 8Mp camera ISP bindings to DT schema.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
> .../bindings/media/samsung,s5c73m3.yaml | 165 ++++++++++++++++++
> .../bindings/media/samsung-s5c73m3.txt | 97 ----------
> MAINTAINERS | 1 +
> 3 files changed, 166 insertions(+), 97 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/media/samsung,s5c73m3.yaml
> delete mode 100644 Documentation/devicetree/bindings/media/samsung-s5c73m3.txt
>
Reviewed-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 16+ messages in thread