[PATCH] arm64: dts: imx8mp: Update GPIO M to CLKOUT1 on DH electronics i.MX8M Plus DHCOM and PDK2

[PATCH] arm64: dts: imx8mp: Update GPIO M to CLKOUT1 on DH electronics i.MX8M Plus DHCOM and PDK2

[Marek Vasut]

The GPIO M SoM pin is connected to CLKOUT1, while CLKOUT2 is used as a supply
for TC9595 bridge chip clock. Update the comment. No functional change.

Signed-off-by: Marek Vasut <marex@denx.de>
---
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Marek Vasut <marex@denx.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: kernel@dh-electronics.com
Cc: linux-arm-kernel@lists.infradead.org
---
 arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts | 2 +-
 arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts
index fdf18b7f208d5..b657ac6adddbe 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts
@@ -173,7 +173,7 @@ &iomuxc {
 	/*
 	 * GPIO_A,B,C,D are connected to buttons.
 	 * GPIO_E,F,H,I are connected to LEDs.
-	 * GPIO_M is connected to CLKOUT2.
+	 * GPIO_M is connected to CLKOUT1.
 	 */
 	pinctrl-0 = <&pinctrl_hog_base
 		     &pinctrl_dhcom_g &pinctrl_dhcom_j
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
index 9cdd4234c4cae..cc8e086ff7b63 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
@@ -547,7 +547,7 @@ &pinctrl_dhcom_a &pinctrl_dhcom_b &pinctrl_dhcom_c
 		     &pinctrl_dhcom_d &pinctrl_dhcom_e &pinctrl_dhcom_f
 		     &pinctrl_dhcom_g &pinctrl_dhcom_h &pinctrl_dhcom_i
 		     &pinctrl_dhcom_j &pinctrl_dhcom_k &pinctrl_dhcom_l
-		     /* GPIO_M is connected to CLKOUT2 */
+		     /* GPIO_M is connected to CLKOUT1 */
 		     &pinctrl_dhcom_int>;
 	pinctrl-names = "default";
 
-- 
2.39.1

Re: [PATCH] arm64: dts: imx8mp: Update GPIO M to CLKOUT1 on DH electronics i.MX8M Plus DHCOM and PDK2

[Shawn Guo]

On Fri, Feb 17, 2023 at 08:25:45PM +0100, Marek Vasut wrote:
> The GPIO M SoM pin is connected to CLKOUT1, while CLKOUT2 is used as a supply
> for TC9595 bridge chip clock. Update the comment. No functional change.
> 
> Signed-off-by: Marek Vasut <marex@denx.de>

Applied, thanks!