From: Sam Protsenko <semen.protsenko@linaro.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
Chanwoo Choi <cw00.choi@samsung.com>,
Sylwester Nawrocki <s.nawrocki@samsung.com>,
Rob Herring <robh+dt@kernel.org>
Cc: David Virag <virag.david003@gmail.com>,
Chanho Park <chanho61.park@samsung.com>,
Alim Akhtar <alim.akhtar@samsung.com>,
Sumit Semwal <sumit.semwal@linaro.org>,
Tomasz Figa <tomasz.figa@gmail.com>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
linux-samsung-soc@vger.kernel.org, linux-clk@vger.kernel.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 5/6] clk: samsung: exynos850: Add AUD and HSI main gate clocks
Date: Wed, 22 Feb 2023 22:21:32 -0600 [thread overview]
Message-ID: <20230223042133.26551-6-semen.protsenko@linaro.org> (raw)
In-Reply-To: <20230223042133.26551-1-semen.protsenko@linaro.org>
Add main gate clocks for controlling AUD and HSI CMUs:
- gout_aud_cmu_aud_pclk
- gout_hsi_cmu_hsi_pclk
Those clocks were marked as CLK_IGNORE_UNUSED, as system hangs on
boot otherwise.
While at it, add missing PPMU (Performance Profiling Monitor Unit)
clocks for CMU_HSI.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
---
Changes in v2:
- Rebased on top of most recent soc/for-next tree
- Added comment for CLK_IGNORE_UNUSED flag usage
drivers/clk/samsung/clk-exynos850.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/drivers/clk/samsung/clk-exynos850.c b/drivers/clk/samsung/clk-exynos850.c
index 601fe05e8555..6ab5fa8c2ef3 100644
--- a/drivers/clk/samsung/clk-exynos850.c
+++ b/drivers/clk/samsung/clk-exynos850.c
@@ -674,6 +674,7 @@ static const struct samsung_cmu_info apm_cmu_info __initconst = {
#define CLK_CON_GAT_GOUT_AUD_ABOX_BCLK_UAIF4 0x2014
#define CLK_CON_GAT_GOUT_AUD_ABOX_BCLK_UAIF5 0x2018
#define CLK_CON_GAT_GOUT_AUD_ABOX_BCLK_UAIF6 0x201c
+#define CLK_CON_GAT_CLK_AUD_CMU_AUD_PCLK 0x2020
#define CLK_CON_GAT_GOUT_AUD_ABOX_ACLK 0x2048
#define CLK_CON_GAT_GOUT_AUD_ABOX_BCLK_SPDY 0x204c
#define CLK_CON_GAT_GOUT_AUD_ABOX_CCLK_ASB 0x2050
@@ -729,6 +730,7 @@ static const unsigned long aud_clk_regs[] __initconst = {
CLK_CON_GAT_GOUT_AUD_ABOX_BCLK_UAIF4,
CLK_CON_GAT_GOUT_AUD_ABOX_BCLK_UAIF5,
CLK_CON_GAT_GOUT_AUD_ABOX_BCLK_UAIF6,
+ CLK_CON_GAT_CLK_AUD_CMU_AUD_PCLK,
CLK_CON_GAT_GOUT_AUD_ABOX_ACLK,
CLK_CON_GAT_GOUT_AUD_ABOX_BCLK_SPDY,
CLK_CON_GAT_GOUT_AUD_ABOX_CCLK_ASB,
@@ -848,6 +850,9 @@ static const struct samsung_div_clock aud_div_clks[] __initconst = {
};
static const struct samsung_gate_clock aud_gate_clks[] __initconst = {
+ GATE(CLK_GOUT_AUD_CMU_AUD_PCLK, "gout_aud_cmu_aud_pclk",
+ "dout_aud_busd",
+ CLK_CON_GAT_CLK_AUD_CMU_AUD_PCLK, 21, CLK_IGNORE_UNUSED, 0),
GATE(CLK_GOUT_AUD_CA32_CCLK, "gout_aud_ca32_cclk", "mout_aud_cpu_hch",
CLK_CON_GAT_GOUT_AUD_ABOX_CCLK_CA32, 21, 0, 0),
GATE(CLK_GOUT_AUD_ASB_CCLK, "gout_aud_asb_cclk", "dout_aud_cpu_aclk",
@@ -1116,12 +1121,15 @@ static const struct samsung_cmu_info g3d_cmu_info __initconst = {
#define PLL_CON0_MUX_CLKCMU_HSI_MMC_CARD_USER 0x0610
#define PLL_CON0_MUX_CLKCMU_HSI_USB20DRD_USER 0x0620
#define CLK_CON_MUX_MUX_CLK_HSI_RTC 0x1000
+#define CLK_CON_GAT_CLK_HSI_CMU_HSI_PCLK 0x2000
#define CLK_CON_GAT_HSI_USB20DRD_TOP_I_RTC_CLK__ALV 0x2008
#define CLK_CON_GAT_HSI_USB20DRD_TOP_I_REF_CLK_50 0x200c
#define CLK_CON_GAT_HSI_USB20DRD_TOP_I_PHY_REFCLK_26 0x2010
#define CLK_CON_GAT_GOUT_HSI_GPIO_HSI_PCLK 0x2018
#define CLK_CON_GAT_GOUT_HSI_MMC_CARD_I_ACLK 0x2024
#define CLK_CON_GAT_GOUT_HSI_MMC_CARD_SDCLKIN 0x2028
+#define CLK_CON_GAT_GOUT_HSI_PPMU_ACLK 0x202c
+#define CLK_CON_GAT_GOUT_HSI_PPMU_PCLK 0x2030
#define CLK_CON_GAT_GOUT_HSI_SYSREG_HSI_PCLK 0x2038
#define CLK_CON_GAT_GOUT_HSI_USB20DRD_TOP_ACLK_PHYCTRL_20 0x203c
#define CLK_CON_GAT_GOUT_HSI_USB20DRD_TOP_BUS_CLK_EARLY 0x2040
@@ -1131,12 +1139,15 @@ static const unsigned long hsi_clk_regs[] __initconst = {
PLL_CON0_MUX_CLKCMU_HSI_MMC_CARD_USER,
PLL_CON0_MUX_CLKCMU_HSI_USB20DRD_USER,
CLK_CON_MUX_MUX_CLK_HSI_RTC,
+ CLK_CON_GAT_CLK_HSI_CMU_HSI_PCLK,
CLK_CON_GAT_HSI_USB20DRD_TOP_I_RTC_CLK__ALV,
CLK_CON_GAT_HSI_USB20DRD_TOP_I_REF_CLK_50,
CLK_CON_GAT_HSI_USB20DRD_TOP_I_PHY_REFCLK_26,
CLK_CON_GAT_GOUT_HSI_GPIO_HSI_PCLK,
CLK_CON_GAT_GOUT_HSI_MMC_CARD_I_ACLK,
CLK_CON_GAT_GOUT_HSI_MMC_CARD_SDCLKIN,
+ CLK_CON_GAT_GOUT_HSI_PPMU_ACLK,
+ CLK_CON_GAT_GOUT_HSI_PPMU_PCLK,
CLK_CON_GAT_GOUT_HSI_SYSREG_HSI_PCLK,
CLK_CON_GAT_GOUT_HSI_USB20DRD_TOP_ACLK_PHYCTRL_20,
CLK_CON_GAT_GOUT_HSI_USB20DRD_TOP_BUS_CLK_EARLY,
@@ -1162,6 +1173,10 @@ static const struct samsung_mux_clock hsi_mux_clks[] __initconst = {
};
static const struct samsung_gate_clock hsi_gate_clks[] __initconst = {
+ /* TODO: Should be enabled in corresponding driver */
+ GATE(CLK_GOUT_HSI_CMU_HSI_PCLK, "gout_hsi_cmu_hsi_pclk",
+ "mout_hsi_bus_user",
+ CLK_CON_GAT_CLK_HSI_CMU_HSI_PCLK, 21, CLK_IGNORE_UNUSED, 0),
GATE(CLK_GOUT_USB_RTC_CLK, "gout_usb_rtc", "mout_hsi_rtc",
CLK_CON_GAT_HSI_USB20DRD_TOP_I_RTC_CLK__ALV, 21, 0, 0),
GATE(CLK_GOUT_USB_REF_CLK, "gout_usb_ref", "mout_hsi_usb20drd_user",
@@ -1176,6 +1191,10 @@ static const struct samsung_gate_clock hsi_gate_clks[] __initconst = {
GATE(CLK_GOUT_MMC_CARD_SDCLKIN, "gout_mmc_card_sdclkin",
"mout_hsi_mmc_card_user",
CLK_CON_GAT_GOUT_HSI_MMC_CARD_SDCLKIN, 21, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_GOUT_HSI_PPMU_ACLK, "gout_hsi_ppmu_aclk", "mout_hsi_bus_user",
+ CLK_CON_GAT_GOUT_HSI_PPMU_ACLK, 21, 0, 0),
+ GATE(CLK_GOUT_HSI_PPMU_PCLK, "gout_hsi_ppmu_pclk", "mout_hsi_bus_user",
+ CLK_CON_GAT_GOUT_HSI_PPMU_PCLK, 21, 0, 0),
GATE(CLK_GOUT_SYSREG_HSI_PCLK, "gout_sysreg_hsi_pclk",
"mout_hsi_bus_user",
CLK_CON_GAT_GOUT_HSI_SYSREG_HSI_PCLK, 21, 0, 0),
--
2.39.1
next prev parent reply other threads:[~2023-02-23 4:23 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-23 4:21 [PATCH v2 0/6] clk: samsung: exynos850: Add missing clocks for PM Sam Protsenko
2023-02-23 4:21 ` [PATCH v2 1/6] dt-bindings: clock: exynos850: Add Exynos850 CMU_G3D Sam Protsenko
2023-02-23 4:21 ` [PATCH v2 2/6] dt-bindings: clock: exynos850: Add AUD and HSI main gate clocks Sam Protsenko
2023-02-23 4:21 ` [PATCH v2 3/6] clk: samsung: clk-pll: Implement pll0818x PLL type Sam Protsenko
2023-02-23 4:21 ` [PATCH v2 4/6] clk: samsung: exynos850: Implement CMU_G3D domain Sam Protsenko
2023-02-23 4:21 ` Sam Protsenko [this message]
2023-02-23 4:21 ` [PATCH v2 6/6] arm64: dts: exynos: Add CMU_G3D node for Exynos850 SoC Sam Protsenko
[not found] ` <CGME20230223042126epcas2p11c50a7be714a7f305d743faa68dee3ca@epcms2p5>
2023-02-27 3:56 ` [PATCH v2 5/6] clk: samsung: exynos850: Add AUD and HSI main gate clocks CHANHO PARK
2023-03-06 14:28 ` [PATCH v2 0/6] clk: samsung: exynos850: Add missing clocks for PM Krzysztof Kozlowski
2023-03-06 15:51 ` Krzysztof Kozlowski
2023-03-06 18:55 ` Sam Protsenko
2023-03-07 7:47 ` Krzysztof Kozlowski
2023-03-07 17:37 ` Sam Protsenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230223042133.26551-6-semen.protsenko@linaro.org \
--to=semen.protsenko@linaro.org \
--cc=alim.akhtar@samsung.com \
--cc=chanho61.park@samsung.com \
--cc=cw00.choi@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=s.nawrocki@samsung.com \
--cc=sboyd@kernel.org \
--cc=sumit.semwal@linaro.org \
--cc=tomasz.figa@gmail.com \
--cc=virag.david003@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).